Packages changed:
  ImageMagick (7.0.10.55 -> 7.0.10.58)
  Mesa (20.3.2 -> 20.3.3)
  Mesa-drivers (20.3.2 -> 20.3.3)
  autoyast2 (4.3.64 -> 4.3.65)
  bash (5.0.18 -> 5.1.4)
  brltty (6.1 -> 6.2)
  btrfsprogs
  c-ares (1.17.0 -> 1.17.1)
  colord
  desktop-data-openSUSE
  dnsmasq (2.82 -> 2.83)
  dosfstools (4.1 -> 4.1+git.1610658652.9443732)
  elfutils-debuginfod
  findutils (4.7.0 -> 4.8.0)
  flatpak (1.8.4 -> 1.10.0)
  gcr (3.38.0 -> 3.38.1)
  gnome-shell (3.38.2 -> 3.38.3)
  gpg2 (2.2.25 -> 2.2.27)
  gstreamer (1.18.2 -> 1.18.3)
  gstreamer-devtools (1.18.2 -> 1.18.3)
  gstreamer-editing-services (1.18.2 -> 1.18.3)
  gstreamer-plugins-bad (1.18.2 -> 1.18.3)
  gstreamer-plugins-base (1.18.2 -> 1.18.3)
  gstreamer-plugins-good (1.18.2 -> 1.18.3)
  gstreamer-plugins-libav (1.18.2 -> 1.18.3)
  gstreamer-plugins-ugly (1.18.2 -> 1.18.3)
  harfbuzz
  iptables (1.8.6 -> 1.8.7)
  jack (1.9.14 -> 1.9.16)
  kalgebra
  kdiagram (2.7.0 -> 2.8.0)
  kernel-64kb (5.10.7 -> 5.10.9)
  kernel-source (5.10.7 -> 5.10.9)
  kreversi
  libblockdev (2.24 -> 2.25)
  libcap (2.43 -> 2.46)
  libcontainers-common (20200727 -> 20210112)
  libkdegames
  libmwaw (0.3.16 -> 0.3.17)
  libnftnl (1.1.8 -> 1.1.9)
  libodfgen (0.1.7 -> 0.1.8)
  libpt2
  libqt5-qtbase
  libstorage-ng (4.3.80 -> 4.3.85)
  libusb-1_0
  libvdpau
  libvirt (6.10.0 -> 7.0.0)
  libxkbcommon
  lzip (1.21 -> 1.22)
  miniupnpc (2.1 -> 2.2.1)
  mtr (0.92 -> 0.94)
  mutter (3.38.2 -> 3.38.3)
  nano (5.4 -> 5.5)
  ncurses (6.2.20201205 -> 6.2.20210109)
  nftables (0.9.7 -> 0.9.8)
  openal-soft (1.20.1 -> 1.21.0)
  openconnect
  openldap2 (2.4.56 -> 2.4.57)
  openssh (8.3p1 -> 8.4p1)
  orc (0.4.31 -> 0.4.32)
  osinfo-db (20201015 -> 20201218)
  ovmf
  patterns-gnome
  perl-Mojolicious (8.70 -> 8.71)
  perl-Net-DNS (1.28 -> 1.29)
  perl-URI (5.05 -> 5.06)
  plasma5-disks
  plasma5-thunderbolt
  plasma5-workspace
  poppler (20.12.1 -> 21.01.0)
  poppler-qt5 (20.12.1 -> 21.01.0)
  ppp
  publicsuffix (20201223 -> 20210108)
  pulseaudio
  purple-rocketchat (0.0+git20201219 -> 0.0+git20210119)
  python-M2Crypto
  python-SQLAlchemy
  python-gst (1.18.2 -> 1.18.3)
  python-libvirt-python (6.10.0 -> 7.0.0)
  python-matplotlib (3.3.0 -> 3.3.3)
  python-numpy
  qemu
  raspberrypi-firmware (2020.12.15 -> 2021.01.15)
  raspberrypi-firmware-config (2020.12.15 -> 2021.01.15)
  readline (8.0 -> 8.1)
  rtl8812au (5.6.4.2+git20200702.3110ad6_k5.10.7_1 -> 5.9.3.2+git20201214.b95e750_k5.10.9_1)
  rubygem-Ascii85 (1.0.3 -> 1.1.0)
  rubygem-autoprefixer-rails (10.1.0.0 -> 10.2.0.0)
  rubygem-bcrypt_pbkdf (1.0.1 -> 1.1.0)
  rubygem-benchmark (0.1.0 -> 0.1.1)
  rubygem-binding_of_caller (0.8.0 -> 1.0.0)
  rubygem-bundler (2.1.4 -> 2.2.6)
  rubygem-capistrano (3.14.1 -> 3.15.0)
  rubygem-celluloid (0.17.4 -> 0.18.0)
  rubygem-concurrent-ruby (1.1.7 -> 1.1.8)
  rubygem-cool.io (1.6.1 -> 1.7.0)
  rubygem-crack (0.4.4 -> 0.4.5)
  rubygem-cri (2.15.10 -> 2.15.11)
  rubygem-debase-ruby_core_source (0.10.10 -> 0.10.12)
  rubygem-debug_inspector (0.0.3 -> 1.0.0)
  rubygem-delayed_job (4.1.8 -> 4.1.9)
  rubygem-delayed_job_active_record (4.1.4 -> 4.1.5)
  rubygem-docile (1.3.2 -> 1.3.5)
  rubygem-dry-configurable (0.11.6 -> 0.12.0)
  rubygem-dry-core (0.4.9 -> 0.5.0)
  rubygem-dry-logic (1.0.7 -> 1.1.0)
  rubygem-excon (0.76.0 -> 0.78.1)
  rubygem-faraday (1.0.1 -> 1.3.0)
  rubygem-fluentd (1.11.2 -> 1.12.0)
  rubygem-fog-libvirt (0.7.0 -> 0.8.0)
  rubygem-font-awesome-rails (4.7.0.5 -> 4.7.0.6)
  rubygem-gettext (3.3.5 -> 3.3.7)
  rubygem-gssapi (1.3.0 -> 1.3.1)
  rubygem-haml (5.1.2 -> 5.2.1)
  rubygem-hashie (3.6.0 -> 4.1.0)
  rubygem-hoe (3.22.2 -> 3.22.3)
  rubygem-i18n (1.8.5 -> 1.8.7)
  rubygem-js-routes (1.4.9 -> 1.4.14)
  rubygem-json_pure (2.3.1 -> 2.5.1)
  rubygem-liquid (4.0.3 -> 5.0.0)
  rubygem-listen (3.2.1 -> 3.4.1)
  rubygem-loofah (2.8.0 -> 2.9.0)
  rubygem-mime-types-data (3.2020.0512 -> 3.2020.1104)
  rubygem-minitar (0.5.4 -> 0.9)
  rubygem-mixlib-shellout (3.0.9 -> 3.2.2)
  rubygem-mocha (1.11.2 -> 1.12.0)
  rubygem-moneta (1.4.0 -> 1.4.1)
  rubygem-omniauth (1.9.1 -> 2.0.1)
  rubygem-omniauth-github (1.4.0 -> 2.0.0)
  rubygem-omniauth-google-oauth2 (0.8.0 -> 0.8.1)
  rubygem-omniauth-oauth2 (1.7.0 -> 1.7.1)
  rubygem-paint (2.2.0 -> 2.2.1)
  rubygem-parser (2.7.1.5 -> 3.0.0.0)
  rubygem-pdf-core (0.8.1 -> 0.9.0)
  rubygem-regexp_parser (1.8.2 -> 2.0.3)
  rubygem-rice (2.2.0 -> 3.0.0)
  rubygem-rouge (3.23.0 -> 3.26.0)
  rubygem-rspec (3.9.0 -> 3.10.0)
  rubygem-rspec-core (3.9.2 -> 3.10.1)
  rubygem-rspec-expectations (3.9.2 -> 3.10.1)
  rubygem-rspec-mocks (3.9.1 -> 3.10.1)
  rubygem-rspec-support (3.9.3 -> 3.10.1)
  rubygem-rubocop (1.7.0 -> 1.8.1)
  rubygem-ruby-libvirt
  rubygem-ruby-progressbar (1.10.1 -> 1.11.0)
  rubygem-ruby2_keywords (0.0.2 -> 0.0.4)
  rubygem-ruby_parser (3.15.0 -> 3.15.1)
  rubygem-sdoc (1.1.0 -> 2.0.3)
  rubygem-serverengine (2.2.1 -> 2.2.2)
  rubygem-sexp_processor (4.15.1 -> 4.15.2)
  rubygem-simplecov (0.19.0 -> 0.21.2)
  rubygem-sshkit (1.21.0 -> 1.21.2)
  rubygem-strptime (0.2.4 -> 0.2.5)
  rubygem-tmuxinator (2.0.1 -> 2.0.2)
  rubygem-tomlrb (1.3.0 -> 2.0.1)
  rubygem-ttfunk (1.6.2.1 -> 1.7.0)
  rubygem-tzinfo-0 (0.3.57 -> 0.3.59)
  rubygem-tzinfo-1.2 (1.2.8 -> 1.2.9)
  rubygem-tzinfo-data (1.2020.1 -> 1.2020.6)
  rubygem-unicode-display_width (1.7.0 -> 2.0.0)
  rubygem-webpacker (4.2.2 -> 5.2.1)
  rubygem-websocket (1.2.8 -> 1.2.9)
  rubygem-winrm (2.3.4 -> 2.3.5)
  rubygem-winrm-elevated (1.2.2 -> 1.2.3)
  rubygem-xml-simple (1.1.5 -> 1.1.8)
  sbc (1.4 -> 1.5)
  shared-mime-info (2.0 -> 2.1)
  sord (0.16.6 -> 0.16.8)
  system-users
  sysuser-tools
  tar (1.32 -> 1.33)
  tcl (8.6.10 -> 8.6.11)
  texlive-specs-n (2020.176.2.004svn48145 -> 2020.177.2.004svn48145)
  tk (8.6.10 -> 8.6.11)
  u-boot-rpiarm64
  virt-manager
  vlc (3.0.11.1 -> 3.0.12)
  vsftpd
  vulkan-loader (1.2.162.0 -> 1.2.165)
  wavpack (5.3.0 -> 5.4.0)
  xapps (2.0.5 -> 2.0.6)
  xdg-desktop-portal
  xdg-utils
  xen (4.14.1_05 -> 4.14.1_06)
  yast2-packager (4.3.11 -> 4.3.12)
  yast2-trans (84.87.20210109.77c13975e0 -> 84.87.20210116.f5a95d2c8b)
  zxing-cpp

=== Details ===

==== ImageMagick ====
Version update (7.0.10.55 -> 7.0.10.58)
Subpackages: ImageMagick-config-7-SUSE ImageMagick-extra libMagick++-7_Q16HDRI4 libMagickCore-7_Q16HDRI8 libMagickWand-7_Q16HDRI8

- update to 7.0.10.58:
  * identify the convex hull and minimum bounding box attributes of an image
    with the -define identify:convex-hull=true define.
  * set the quality to 100 to produce lossless HEIC images (reference
    https://github.com/ImageMagick/ImageMagick/pull/3116).
  * properly identify SVG images (reference
    https://github.com/ImageMagick/ImageMagick/issues/3117).
  * duplicate operator: inverse range parameter working again (reference
    https://github.com/ImageMagick/ImageMagick/issues/3113).
  * Fix rounding error for CSS colors on i686 (reference
    https://tracker.debian.org/pkg/imagemagick).
  * additional checks to prevent integer overflow.
  * Fix rounding error for CSS colors (reference
    https://github.com/ImageMagick/ImageMagick6/issues/129).

==== Mesa ====
Version update (20.3.2 -> 20.3.3)
Subpackages: Mesa-dri-devel Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1

- update to 20.3.3
  * fourth bugfix release for the 20.3 branch

==== Mesa-drivers ====
Version update (20.3.2 -> 20.3.3)
Subpackages: Mesa-dri Mesa-dri-nouveau Mesa-gallium Mesa-libva libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi

- update to 20.3.3
  * fourth bugfix release for the 20.3 branch

==== autoyast2 ====
Version update (4.3.64 -> 4.3.65)
Subpackages: autoyast2-installation

- Upgrade: Checking if a valid base product has been selected for
  upgrade and if not asking the user to check the product entry
  in the AY configuration file (bsc#1175876).
- 4.3.65

==== bash ====
Version update (5.0.18 -> 5.1.4)
Subpackages: bash-doc

- Update to final bash 5.1
  * Which is mainly the last rc3 veresion
- Add official patch bash51-001
  There is a missing dependency on a constructed file, which can cause highly
  parellel builds to fail.
- Add official patch bash51-002
  If there are no jobs, and the `-n' and `-p' options are both supplied to
  `wait', bash can assign a value to the variable name specified with `-p'
  instead of leaving it unset.
- Add official patch bash51-003
  Bash does not put a command substitution process that is started to perform an
  expansion in a child process into the right process group where it can receive
  keyboard-generated signals.
- Add official patch bash51-004
  If a key-value compound array assignment to an associative array is supplied
  as an assignment statement argument to the `declare' command that declares the
  array, the assignment doesn't perform the correct word expansions.
  This patch makes key-value assignment and subscript assignment perform the
  same expansions when they're supplied as an argument to `declare'.
- Update to bash 5.1 rc3
  * The `assoc_expand_once' option now affects the evaluation of the -v primary
    to test and the [[ compound command.

==== brltty ====
Version update (6.1 -> 6.2)
Subpackages: brltty-driver-at-spi2 brltty-driver-brlapi brltty-driver-speech-dispatcher brltty-driver-xwindow libbrlapi0_8 python3-brlapi xbrlapi

- Starting with the TCL 8.6.11 package, the default install path
  for the TCL library is corrected to /usr/lib64/tcl: adjust the
  move command for our tcl module basedon this change.
- Update to version 6.2:
  + See ChangeLog for changes.
- Update api_version: now 0.8.1.
- Replace brltty-5.5-systemd-install.patch with
  brltty-fix-install-dirs.patch: also adjust udev directory.
- Drop brltty-gcc10.patch: fixed upstream.
- Move udev rules patching to %build.
- Use the Makefile to install udev and polkit rules and docs.
- Brltty-config has been renamed to brltty-config.sh.
- Remove polkit conditional: we always have it enabled.
- Remove old espeak support: Leap prior to 15.0 is no longer
  supported.
- Add python3-setuptools to BuildRequires: required by rpm during
  checks.
- Add doxygen to BuildRequires: needed to build manual.
- Create a brltty user on install: now expected by service.

==== btrfsprogs ====
Subpackages: btrfsprogs-udev-rules libbtrfs0

- prepare usrmerge (boo#1029961)
- Update to 5.9:
  * mkfs:
  * switch default to single profile for multi-device filesystem, up to
    now it was raid0 that may not be simple to convert to some other profile
    as raid0 needs a workspace on all device for that
  * new option -R for run-time options (eg. mount time enabled), now
    understands free-space-tree
  * subvolume delete:
  * refuse to delete the default subvolume (kernel will not allow that but
    the error reason is not obvious)
  * warn on EPERM, eg. if send is on progress on the subvolume
  * convert:
  * fix 32bit overflows on large filesystems
  * improved error handling and error messages
  * check free space taking fragmentation into account
  * check:
  * detect and repair wrong inode generation
  * minor improvement in error reporting on roots
  * libbtrfsutils: follow main package versioning (5.9)
  * add pkg-config file definitions
  * python-btrfsutil: follow main package versioning (5.9)
  * inspect tree-stats: print node counts for each level, fanout
  * other:
  * docs:
  * remove obsolete mount options (alloc_start, subvolrootid)
  * deleting default subvolume is not permitted
  * updated or fixed tests
  * .editorconfig updates
  * move files to kernel-shared/
  * CI:
  * updated to use zstd 1.4.5
  * fix reiserfs build
  * more builds with asan, ubsan
  * sb-mod updates
  * build:
  * print .so versions of libraries in configure summary
- Update to 5.7:
  * mkfs:
  * new option to enable features otherwise enabled at runtime, now
    implemented for quotas, 'mkfs.btrfs -R quota'
  * fix space accounting for small image, DUP and --rootdir
  * option -A removed
  * check: detect ranges with overlapping csum items
  * fi usage: report correct numbers when plain RAID56 profiles are used
  * convert: ensure the data chunks size never exceed device size
  * libbtrfsutil: update documentation regarding subvolume deletion
  * build: support libkcapi as implementation backend for cryptographic
    primitives
  * core: global options for verbosity (-v, -q), subcommands -v or -q are
    aliases and will continue to work but are considered deprecated,
    current command output is preserved to keep scripts working
  * other:
  * build warning fixes
  * btrfs-debugfs ported to python 3
- Update to 5.6.1:
  * print warning when multiple block group profiles exist, update 'fi usage'
    summary, add docs to maual page explaining the situation
  * build: optional support for libgcrypt or libsodium, providing hash
    implementations
  * updated docs
- Fix content of _dracutmodulesdir variable: this definitively does
  not belong to libexecdir.
- Update to 5.6:
  * inspect logical-resolve: support LOGICAL_INO_V2 as new option '-o',
    helps advanced dedupe tools
  * inspect: user larger buffer (64K) for results
  * subvol delete: support deletion by id (requires kernel 5.7+)
  * dump-tree: new option --hide-names, replace any names
    (file, directory, subvolume, xattr) in the output with stubs
  * various fixes
- Update to 5.4.1
  * build: fix docbook5 build
  * check: do extra verification of extent items, inode items and chunks
  * qgroup: return ENOTCONN if quotas not running (needs updated kernel)
  * other: various test fixups
- BuildRequire pkgconfig(udev) instead of udev: Allow OBS to
  shortcut through the -mini flavor.
- Use pkg-config --modversion udev to identify the current udev
  version. This is more portable and supports the -mini flavors.
- Update to 5.4
  * support new hash algorithms (kernel 5.5):
  * mkfs.btrfs and btrfs-convert with --csum, crc32c, xxhash, sha256, blake2
  * mkfs: support new raid1c3 and raid1c4 block group profiles (kernel 5.5)
  * check:
  * --repair delays start with a warning, can be skipped using --force
  * enhanced detetion of inode types from partial data, more options for
    repair
  * receive: fix quiet option
  * image: speed up chunk loading
  * fi usage:
  * sort devices by id
  * print ratio of used/total per block group type
  * rescue zero-log: reset the log pointers directly, avoid reading some other
    potentially damaged structures
  * new make target install-static to install only static binaries/libraries
  * other
  * docs updates
  * new tests
  * cleanups and refactoring
- Update to 5.3.1:
  * libbtrfs: fix link breakage due to missing symbols
- Updaet to 5.3:
  * mkfs:
  * new option to specify checksum algorithm (only crc32c)
  * fix xattr enumeration
  * dump-tree: BFS (breadth-first) traversal now default
  * libbtrfsutil: remove stale BTRFS_DEV_REPLACE_ITEM_STATE_x defines
  * ci: add support for gitlab
  * other:
  * preparatory work for more checksum algorithms
  * docs update
  * switch to docbook5 backend for asciidoc
  * fix build on uClibc due to missing backtrace()
  * lots of printf format fixups
- Enable build of python-bindings for libbtrfsutil
- Update to 5.2.2:
  * check:
  * fix false report of wrong byte count for orphan inodes
  * option -E was not handled correctly
  * new check and repair for root item generation
  * balance: check for full-balance before background fork
  * mkfs: check that total device size does not overflow 16EiB
  * dump-tree: print DEV_STATS key type
  * other:
  * new and updated tests
  * doc fixups and updates
- update to 5.2.1
  * scrub status: fix ETA calculation after resume
  * check: fix crash when using -Q
  * restore: fix symlink owner restoration
  * mkfs: fix regression with mixed block groups
  * core: fix commit to process all delayed refs
  * other:
  * minor cleanups
  * test updates
- update to 5.2
  * subvol show: print qgroup information when available
  * scrub:
  * status: show ETA, revamp the whole output
  * fix reading/writing of last position on resume/cancel, potentially
    skipping part of the filesystem on next resume
  * dump-tree: add new option --noscan to use only devices given on the
    commandline
  * all-in-one binary (busybox style) with mkfs.btrfs, btrfs-image,
    btrfs-convert, btrfstune
  * image: fix hang when there are more than 32 cpus online and compression is
    requested
  * convert: fix some false ENOSPC errors when --rootdir is used
  * build: fix gcc9 warnings
  * core changes
  * command handling cleanups
  * dead code removal
  * cmds-* files moved to cmds/
  * other shared userspace files moved to common/
  * utils.c split into more files
  * preparatory work for more output formats
  * libbtrfsutil: fix unaligned access
  * other
  * new and updated tests
  * fix tests so CI passes again
  * sb-mod can modify more superblock items
- update to version 5.1
  * repair: flush/FUA support to avoid breaking metadata COW
  * file extents repair no longer relies on data in extent tree
  * lowmem: fix false error reports about gaps between extents
  * add inode mode check and repair for various objects
  * add check for invalid combination of nocow/compressed extents
  * device scan option to forget scanned devices [new]
  * mkfs: use same chunk size as kernel for initial creation
  * dev-repace: better report when other exclusive operation runs
  * help for sntax errors on command lines, print relevant msgs
  * defrag: able to open files in RO mode
  * dump-tree: --block can be specified multiple times
- update to version 4.20.2
  * dump-super: minor output fixup
  * revert fix for prefix detection of receive path, this is temporary and
  unbreaks existing user setups
- Use correct path for dracut-fsck-help.txt in module-setup.sh (bsc#1122539)
  * Remove module-setup.sh
  * Add module-setup.sh.in
- Advise user of fs recovery options when we fail to mount (fate#320443,
  bsc#1122539)
  * Add dracut-fsck-help.txt
  * Add module-setup.sh
- update to version 4.20.1
  * libbtrfs: fix build of external tools due to missing symbols
  * ci: enable library test
- update to version 4.20
  * new feature: metadata uuid
  * lightweight change of UUID without rewriting all metadata
    (incompatible change)
  * done by btrfstune -m/-M, needs kernel support, 5.0+
  * image:
  * fix block groups when restoring from multi-device image
  * only enlarge result image if it's a regular file
  * check
  * more device extent checks and fixes
  * can repair dir item with mismatched hash
  * mkfs: uuid tree created with proper contents
  * fix mount point detection due to partial prefix match
  * other:
  * new tests, build fixes, doc updates
  * libbtrfsutil: fix tests if kernel lacks support for new
    subvolume ioctls
- partial cleanup with spec-cleaner
- drop 0001-btrfs-progs-Add-support-for-metadata_uuid-field.patch
- drop 0002-btrfs-progs-btrfstune-Add-support-for-changing-the-u.patch
- drop 0003-btrfs-progs-Remove-fsid-metdata_uuid-fields-from-fs_.patch
- drop 0004-btrfs-progs-Remove-btrfs_fs_info-new_fsid.patch
- drop 0005-btrfs-progs-Directly-pass-root-to-change_devices_uui.patch
- Use %license instead of %doc [bsc#1082318]
- Implement fate#325871
  * Added 0001-btrfs-progs-Add-support-for-metadata_uuid-field.patch
  * Added 0002-btrfs-progs-btrfstune-Add-support-for-changing-the-u.patch
  * Added 0003-btrfs-progs-Remove-fsid-metdata_uuid-fields-from-fs_.patch
  * Added 0004-btrfs-progs-Remove-btrfs_fs_info-new_fsid.patch
  * Added 0005-btrfs-progs-Directly-pass-root-to-change_devices_uui.patch
- update to version 4.19.1
  * check
  * many lowmem mode improvements
  * properly report qgroup mismatch errors
  * check symlinks with append/immutable flags
  * fi usage
  * correctly calculate allocated/unallocated for raid10
  * minor output updates
  * mkfs
  * detect ENOSPC on thinly provisioned devices
  * fix spurious EEXIST during directory traversal
  * restore: fix relative path for restore target
  * dump-tree: print symbolic tree names for backrefs
  * send: fix regression preventing send -p with subvolumes mounted on "/"
  * corrupt-tree: refactoring and command line updates
  * build
  * make it work with e2fsprogs < 1.42 again
  * restore support for autoconf 2.63
  * detect if -std=gnu90 is supported
  * other
  * new tests
  * cleanups
- update to version 4.19
  * check: support repair of fs with free-space-tree feature
  * core:
  * port delayed ref infrastructure from kernel
  * support write to free space tree
  * dump-tree: new options for BFS and DFS enumeration of b-trees
  * quota: rescan is now done automatically after 'assign'
  * btrfstune: incomplete fix to uuid change
  * subvol: fix 255 char limit checks
  * completion: complete block devices and now regular files too
  * docs:
  * ship uncompressed manual pages
  * btrfsck uses a manual page link instead of symlink
  * other
  * improved error handling
  * docs
  * new tests
- update to version 4.17.1
  * check:
  * add ability to fix wrong ram_bytes for compressed inline files
  * beautify progress output
  * btrfstune: allow to continue uuid change after unclean interruption
  * several fuzz fixes:
  * detect overalpping chunks
  * chunk loading error handling
  * don't crash with unexpected root refs to extents
  * relax option parsing again to allow mixing options and non-options
    arguments
  * fix qgroup rescan status reporting
  * build:
  * drop obsolete dir-test
  * new configure option to disable building of tools
  * add compatibility options --disable-static and --disable-shared
  * other:
  * cleanups and preparatory work
  * new test images
- spec cleanup
- update to version 4.17
  * check
  * many lowmem mode improvements
  * properly report qgroup mismatch errors
  * check symlinks with append/immutable flags
  * fi usage
  * correctly calculate allocated/unallocated for raid10
  * minor output updates
  * mkfs
  * detect ENOSPC on thinly provisioned devices
  * fix spurious EEXIST during directory traversal
  * restore: fix relative path for restore target
  * dump-tree: print symbolic tree names for backrefs
  * send: fix regression preventing send -p with subvolumes mounted on "/"
  * corrupt-tree: refactoring and command line updates
  * build
  * make it work with e2fsprogs < 1.42 again
  * restore support for autoconf 2.63
  * detect if -std=gnu90 is supported
- Removed patches (upstreamed):
  * 0001-btrfs-progs-convert-fix-support-for-e2fsprogs-1.42.patch
  * 0002-btrfs-progs-build-autoconf-2.63-compatibility.patch
  * 0003-btrfs-progs-build-detect-whether-std-gnu90-is-suppor.patch
- Don't require libzstd-devel-static on builds that don't use it.
- fix installation of btrfs.5.gz
- Fix building on SLE11:
  * btrfs-progs: convert: fix support for e2fsprogs < 1.42
  * btrfs-progs: build: detect whether -std=gnu90 is supported
  * btrfs-progs: build: autoconf 2.63 compatibility
  * Fixed mismerged addition of libbtrfsutil1 package description
- Added patches:
  * 0001-btrfs-progs-convert-fix-support-for-e2fsprogs-1.42.patch
  * 0002-btrfs-progs-build-autoconf-2.63-compatibility.patch
  * 0003-btrfs-progs-build-detect-whether-std-gnu90-is-suppor.patch
- update to version 4.16.1
  * remove obsolete tools: btrfs-debug-tree, btrfs-zero-log, btrfs-show-super,
    btrfs-calc-size
  * sb-mod: new debugging tool to edit superblock items
  * mkfs: detect if thin-provisioned device does not have enough space
  * check: don't try to verify checksums on metadata dump images
  * build: fail documentation build if xmlto is not found
  * build: fix build of btrfs.static
- Remove patch: 0001-btrfs-progs-build-fix-static-build.patch (upstream)
- Update initrd script
- update to version 4.16
  * libbtrfsutil - new LGPL library to wrap userspace functionality
  * several 'btrfs' commands converted to use it:
  * properties
  * filesystem sync
  * subvolume set-default/get-default/delete/show/sync
  * python bindings, tests
  * build
  * use configured pkg-config path
  * CI: add python, musl/clang, built dependencies caching
  * convert: build fix for e2fsprogs 1.44+
  * don't install library links with wrong permissions
  * fixes
  * prevent incorrect use of subvol_strip_mountpoint
  * dump-super: don't verify csum for unknown type
  * convert: fix inline extent creation condition
  * check:
  * lowmem: fix false alert for 'data extent backref lost for snapshot'
  * lowmem: fix false alert for orphan inode
  * lowmem: fix false alert for shared prealloc extents
  * mkfs:
  * add UUID and otime to root of FS_TREE - with the uuid, snapshots will
    be now linked to the toplevel subvol by the parent UUID
  * don't follow symlinks when calculating size
  * pre-create the UUID tree
  * fix --rootdir with selinux enabled
  * dump-tree: add option to print only children nodes of a given block
  * image: handle missing device for RAID1
  * other
  * new tests
  * test script cleanups (quoting, helpers)
  * tool to edit superblocks
  * updated docs
- Add patch: 0001-btrfs-progs-build-fix-static-build.patch
- Add new library packages: libbtrfsutil
- use documentation shipped by upstream tar, reduce dependencies
- enable static build again, zstd now has static version
- update to version 4.15
  * mkfs --rootdir reworked, does not minimize the final image but can be still
    done using a new option --shrink
  * fix allocation of system chunk, don't allocate from the reserved area
  * other
  * new and updated tests
  * cleanups, refactoring
  * doc updates
- spec: fix distro version condition
- update to version 4.14.1
  * dump-tree: print times of root items
  * check: fix several lowmem mode bugs
  * convert: fix rollback after balance
  * other
  * new and updated tests, enabled lowmem mode in CI
  * docs updates
  * fix travis CI build
  * build fixes
  * cleanups
- update to version 4.14
  * build: libzstd now required by default
  * check: more lowmem mode repair enhancements
  * subvol set-default: also accept path
  * prop set: compression accepts no/none, same as ""
  * filesystem usage: enable for filesystem on top of a seed device
  * rescue: new command fix-device-size
  * other
  * new tests
  * cleanups and refactoring
  * doc updates
- Removed patches:
  - rollback-regression-fix.patch - upstreamed
- spec: disable static build, missing libzstd-devel-static
- spec: disable zstd support for non-Tumbleweed distros
- Fix rollback regression which can lead to data corruption
  Added patches: rollback-regression-fix.patch (bsc#1069478)
- Escape the usage of %{VERSION} when calling out to rpm.
  RPM 4.14 has %{VERSION} defined as 'the main packages version'.
- Add dependencies for libreiserfscore0 3.6.27 or newer (bsc#1071085).
- update to version 4.13.3:
  * check: fix --force, wrong check for a mounted block device
  * build: fix --with-convert parsing
  * subvol list: don't list TOPLEVEL
  * other: update tests
- update to version 4.13.2:
  * subvol list:
  * don't list toplevel subvolume among deleted (broken since 4.8.3)
  * minor adjustments of uuid print format
  * subvol delete:
  * fix swapped behaviour of --commit-each and --commit-after
  * fix potentially lost sync if subvolumes are from different filesystems
  * check: add cache for metadata blocks, should improve performance
  * other:
  * new tests, testsuite updates
  * doc updates
  * cleanups
- update to version 4.13.1:
  * image: speed up generating the sanitized names, do not generate unprintable chars
  * completion: add missing commands, better mount point detection
  * restore: add zstd support; libzstd detected automatically, will be
    requested by default in the future, or can be configured out
  * other:
  * misc fixes found by sparse
  * doc enhancements, ioctl manual page started
  * updated and new tests
  * build fixes
- update to version 4.13:
  * convert: reiserfs support
  * check: new option --force to allow check of a mounted filesystem (no repair)
  * mkfs: --rootdir will now copy special files
  * dump-tree: minor output changes
  * inspect rootid: accept file as arugment
  * dev usage: don't calculate slack space for missing devices
  * fi du: don't print error on EMPTY_SUBVOL (inode number 2)
  * build:
  * fixed support for sanitization features on gcc (tsan, asan, ubsan)
  * fix PIE build
  * other:
  * misc cleanups and stability fixes
  * travis CI enhancements
  * new tests, fuzzed images
  * testsuite cleanups
- Removed patches:
  - 0163-btrfs-progs-fsck-fix-segfault.patch - will be upstreamed
  - local-version-override.patch - not needed anymore
  - btrfs-support-pie.patch - upstremed
- Removed patches:
  - 0167-Btrfs-progs-make-find_and_setup_root-return-an-error.patch
  - 0168-Btrfs-progs-don-t-bug-out-if-we-can-t-find-the-last-.patch
- update to 4.12.1
  * build:
  * fix cross-compilation
  * use gnu90 explicitly
  * dump-tree: more relaxed checks so -b can print block on a damaged fs
  * convert: fix the 1MB range exclusion
  * check: more dir_item hash checks
  * other
  * added missing getopt spec for some options
  * doc fixes
  * cleanups
  * test updates
- update to 4.12
  * subvol show: new options --rootid, --uuid to show subvol by the given spec
  * convert: progress report fixes, found by tsan
  * image: progress report fixes, found by tsan
  * fix infinite looping in find-root, or when looking for free extents
  * other:
  * code refactoring
  * docs updates
  * build: ThreadSanitizer support
  * tests: stricter checks for mounted filesystem
- update to -4.11.1
  * image: restoring from multiple devices
  * dev stats: make --check option work
  * check: fix false alert with extent hole on a NO_HOLE filesystem
  * check: lowmem mode, fix false alert in case of mixed inline and compressed
    extent
  * convert: work with large filesystems (many TB)
  * convert: fix overwriting of eb header flags
  * convert: do not clear NODATASUM flag in inodes when run with --no-datasum
  * docs updates
  * build: sync Android.mk with Makefile
  * tests:
  * new tests
  * fix 008 and 009, shell quotation mistake
- update to 4.11
  * receive: fix handling empty stream with -e (multi-stream)
  * send dump: fix printing long file names
  * stability fixes for: dump-super, print-tree, check
  * option parser updates: global options are parsed before the subcommand name
    (old xfstests will fail)
  * new and updated tests
  * documentation updates
- btrfs-support-pie.patch: remove CFLAGS usage from linker lines,
  this will allow the default PIE support to work.
- update to 4.10.2
  * check: lowmem mode fix for false alert about lost backrefs
  * convert: minor bugfix
  * library: fix build, misisng symbols, added tests
- update to 4.10.1
  * receive: handle subvolume in path clone
  * convert: rollback fixed (rewrite was needed to address previous design issues)
  * build: fix build of 3rd party tools, missing <linux/sizes.h>
  * dump-tree: print log trees
  * other: new and updated tests
- update to 4.10
  * send: dump output fixes: missing newlies
  * check: several fixes for the lowmem mode, improved error reporting
  * build
  * removed some library deps for binaries that not use them
  * ctags, cscope
  * split Makefile to the autotool generated part and the rest, not needed
    to autogen.sh after adding a file
  * shared code: sync easy parts with kernel sources
  * other
  * lots of cleanups
  * source file reorganization: convert, mkfs, utils
  * lots of spelling fixes in docs, other updates
  * more tests
- update to 4.9.1
  * check:
  * use correct inode number for lost+found files
  * lowmem mode: fix false alert on dropped leaf
  * size reports: negative numbers might appear in size reports during device
    deletes (previously in EiB units)
  * mkfs: print device being trimmed
  * defrag: v1 ioctl support dropped
  * quota: print message before starting to wait for rescan
  * qgroup show: new option to sync before printing the stats
  * other:
  * corrupt-block enhancements
  * backtrace and co. cleanups
  * doc fixes
- update to 4.9
  * check: many lowmem mode updates
  * send: use splice syscall to copy buffer from kernel
  * receive: new option to dump the stream in textual form
  * convert:
  * move sources to own directory
  * prevent accounting of blocks beyond end of the device
  * make it work with 64k sectorsize
  * mkfs: move sources to own directory
  * defrag: warns if directory used without -r
  * dev stats:
  * new option to check stats for non-zero values
  * add long option for -z
  * library: version bump to 0.1.2, added subvol_uuid_search2
  * other:
  * cleanups
  * docs updates
- update to 4.8.5
  * receive: fix detection of end of stream (error reported even for valid
    streams)
  * other:
  * added test for the receive bug
  * fix linking of library-test
- update to 4.8.4
  * check: support for clearing space cache v2 (free-space-tree)
  * send:
  * more sanity checks (with tests), cleanups
  * fix for fstests/btrfs/038 and btrfs/117 failures
  * build:
  * fix compilation of standalone ioctl.h, pull NULL definition
  * fix library link errors introduced in 4.8.3
  * tests:
  * add more fuzzed images from bugzilla
  * add bogus send stream checks
  * fixups and enhancements for CI environment builds
  * misc refinements and updates of testing framework
  * other:
  * move sources for btrfs-image to own directory
  * deprecated and not build by default: btrfs-calc-size, btrfs-show-super
  * docs updates
- update to 4.8.3
  * check:
  * support for clearing space cache (v1)
  * size reduction of inode backref structure
  * send:
  * fix handling of multiple snapshots (-p and -c options)
  * transfer buffer increased (should reduce number of context switches)
  * reuse existing file for output (-f), eg. when root cannot create files (NFS)
  * dump-tree:
  * print missing items for various structures
  * new: dev stats, balance status item
  * sync key names with kernel (the persistent items)
  * subvol show: now able to print the toplevel subvolume -- the creation time
    might be wrong though
  * mkfs:
  * store the creation time of toplevel root inode
  * print UUID in the summary
  * build: travis CI for devel
  * other:
  * lots of cleanups and refactoring
  * switched to on-stack path structure
  * fixes from coverity, asan, ubsan
  * new tests
  * updates in testing infrastructure
  * fixed convert test 005
- update to 4.8.2
  * convert: also convert file attributes
  * convert: fix wrong tree block alignment for unalianged block group
  * check: quota verify fixes, handle reloc tree
  * build: add stub for FIEMAP_EXTENT_SHARED, compiles on ancient kernels
  * build: add stub for BUILD_ASSERT when ioctl.h is included
  * dump-tree: don't crash on unrecognized tree id for -t
  * tests:
  * add more ioctl tests
  * convert: more symlink tests, attribute tests
  * quota verify for reloc tree
  * other cleanups
- Add ability to provide site specific defaults for mkfs (FATE#320615).
  * Only used for SLES11 defaults.
- Added patch mkfs-default-features.patch
- update to 4.8.1
  * 32bit builds fixed
  * build without backtrace support fixed
- update to 4.8
  * error handling improvements all over the place
  * new fuzzed images, test updates
  * doc fixups
  * minor cleanups and improvements
  * kernel library helpers moved to own directory
  * qgroup: fix regression leading to incorrect status after check,
    introduced in 4.7
- update to 4.7.3
  * fixed free space tree compat status
  * check: low-mem mode: handle partially dropped snapshots
  * dump-super: consolidate options for superblock copy
  * tree-stats: check mount status
  * subvol delete: handle verbosity option
  * defrag: print correct error string
  * mkfs: fix reading rotational status
  * other:
  * UBSAN build option
  * documentation updates
  * enhanced tests: convert, fuzzed images, more tools to run on fuzzed
    images
- removed btrfsprogs-only-install-udev-rules-for-udev-190.patch: fix build
- update to 4.7.2
  * check:
  * urgent fix: false report of backref mismatches; do not --repair
    last unaffected version 4.6.1 (code reverted to that state)
  * fuzzing and fixes
  * added more sanity checks for various structures
  * testing images added
  * build: udev compatibility: do not install .rules on version < 190
  * other:
  * dump-super: do not crash on garbage value in csum_type
  * minor improvements in messages and help strings
  * documentation:
  * filesystem features
- Add new btrfsprogs-udev-rules package to contain the udev rules.
- Fix packaging for udev rules:
  - btrfs builtin didn't exist prior to udev v190, so the rules must
    depend on that version.
- Added patch:
  * btrfsprogs-only-install-udev-rules-for-udev-190.patch
- update to 4.7.1
  * check:
  * new optional mode: optimized for low memory usage (memory/io tradeoff)
  * --mode=lowmem, not default, still considered experimental
  * does not work with --repair yet
  * convert: regression fix, ext2_subvol/image rw permissions
  * mkfs/convert:
  * two-staged creation, partially created filesystem will not be recognized
  * improved error handling (fewer BUG_ONs)
  * convert: preparation for more filesystems to convert from
  * documentation updates: quota, qgroup
  * other
  * message updates
  * more tests
  * more build options, enhanced debugging
- update to 4.7
  * convert: fix creating discontig extents
  * check: speed up traversing heavily reflinked extents within a file
  * check: verify qgroups of higher levels
  * check: repair can now fix wrong qgroup numbers
  * balance: new option to run in the background
  * defrag: default extent target size changed to 32MiB
  * du: silently skip non-btrfs dirs/files
  * documentation updates: btrfs(5), btrfs(8), balance, subvolume, scrub,
    filesystem, convert
  * bugfixes:
  * unaligned access (reported for sparc64) in raid56 parity calculations
  * use /bin/bash
  * other stability fixes and cleanups
  * more tests
- Removed patches:
  * 0002-btrfs-progs-btrfsck-verify-qgroups-above-level-0.patch
  * 0003-btrfs-progs-btrfsck-write-corrected-qgroup-info-to-d.patch
- update to 4.6.1
  * fi resize: negative resize argument accepted again
  * qgroup rescan: fix skipping when rescan is in progress
  * mkfs: initialize stripesize to correct value
  * testsuite updates, mostly convert tests
  * documentation updates
  * btrfs-device, btrfs-restore manual pages enhanced
  * misc fixups
- update to 4.6
  * convert - major rewrite:
  * fix a long-standing bug that led to mixing data blocks into metadata block
    groups
  * the workaround was to do full balance after conversion, which was
    recommended practice anyway
  * explicitly set the lowest supported version of e2fstools to 1.41
  * provide and install udev rules file that addresses problems with device
    mapper devices, renames after removal
  * send: new option: quiet
  * dev usage: report slack space (device size minus filesystem area on the dev)
  * image: support DUP
  * build: short options to enable debugging builds
  * other:
  * code cleanups
  * build fixes
  * more tests and other enhancements
  * Removed patches:
  * 0001-btrfs-progs-free-qgroup-counts-in-btrfsck.patch
  * 0169-btrfs-progs-udev-add-rules-for-dm-devices.patch
  * btrfs-progs-no-PKG_CHECK_VAR
- btrfsck updates for qgroup verification and repair (fate#318144)
  * We can now check all qgroup levels
  * btrfsck will write out corrected qgroups when run with --repair
  - Added patch: 0001-btrfs-progs-free-qgroup-counts-in-btrfsck.patch
  - Added patch: 0002-btrfs-progs-btrfsck-verify-qgroups-above-level-0.patch
  - Added patch: 0003-btrfs-progs-btrfsck-write-corrected-qgroup-info-to-d.patch
- update to 4.5.3
  * ioctl: fix unaligned access in buffer from TREE_SEARCH; might cause SIGBUS
    on architectures that do not support unaligned access and do not performa
    any fixups
  * improved validation checks of superblock and chunk-related structures
  * subvolume sync: fix handling of -s option
  * balance: adjust timing of safety delay countdown with --full-balance
  * rescue super-recover: fix reversed condition check
  * check: fix bytes_used accounting
  * documentation updates: mount options, scrub, send, receive, select-super,
    check, mkfs
  * testing: new fuzzed images, for superblock and chunks
- fix build failure on 13.1: conditional default for udevdir
- fix build failure on SLE11SP4: wrong check in makefile
- Add udev rules for dm devices (bsc#912170 bsc#888215)
  - Added patch: 0169-btrfs-progs-udev-add-rules-for-dm-devices.patch
  - Added patch: btrfs-progs-no-PKG_CHECK_VAR
- update to 4.5.2
  * new/moved command: btrfs-calc-stats -> btrfs inspect tree-stats
  * check: fix false alert for metadata blocks crossing stripe boundary
  * check: catch when qgroup numbers mismatch
  * check: detect running quota rescan and report mismatches
  * balance start: add safety delay before doing a full balance
  * fi sync: is now silent
  * fi show: don't miss filesystems with partially matching uuids
  * dev ready: accept only one argument for device
  * dev stats: print "devid:N" for a missing device instead of "(null)"
  * other:
  * lowest supported version of e2fsprogs is 1.41
  * minor cleanups, test updates
- Removed patch: 2000-btrfs-full-balance-warning.diff
- update to 4.5.1
  * mkfs: allow DUP on multidev fs
  * fix static build
- update to 4.5
  * new/moved commands
  * btrfs-show-super -> btrfs inspect-internal dump-super
  * btrfs-debug-tree -> btrfs inspect-internal dump-tree
  * new commands
  * btrfs fi du - calculate disk usage, including shared extents
  * enhancements
  * device delete - delete by id (needs kernel support, not merged to 4.6)
  * check - new option to specify chunk root
  * debug-tree/dump-tree - option -t understands human readable name of the
    tree (along numerical ids)
  * btrfs-debugfs - can dump block group information
  * bugfixes
  * all commands should accept the option separator "--"
  * several fixes in device scan
  * restore works on filesystems with sectorsize > 4k
  * debug-tree/dump-tree - print compression type as string
  * subvol sync: fix crash, memory corruption
  * argument parsing fixes: subvol get-default, qgroup create/destroy/assign,
    inspect subvolid-resolve
  * check for block device or regular file in several commands
  * other
  * documentation updates
  * manual pages for the moved tools now point to btrfs-filesystem
  * testsuite updates
- Removed patch (upstream):
  0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch
- Recommend btrfsmaintenance
- hide min/max macros clashing with gcc 6 (bnc#966257)
  (0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch)
- update to 4.4.1
  * find-root: don't skip the first chunk
  * free-space-tree compat bits fix
  * build: target symlinks
  * documentation updates
  * test updates
- update to 4.4
  * mkfs.btrfs --data dup
  * support balance filters added/enhanced in linux 4.4
  * manual pages enhanced (btrfs, mkfs, mount, filesystem, balance)
  * 'btrfs filesystem usage' works with mixed blockgroups
  * build: installation to /usr/local
  * build: the 'ar' tool is properly deteced during cross-compilation
  * improved stability on fuzzed/crafted images when reading sys array in
    superblock
  * debug-tree: option -t understands ids for tree root and chnuk tree
  * check: properly reset nlink of multi-linked file
  * chunk recovery: fix floating point exception
  * chunk recovery: endianity bugfix during rebuild
  * mkfs with 64K pages and nodesize reported superblock checksum mismatch
- Removed patches:
  * 0001-btrfs-progs-mkfs-use-correct-size-for-superblock-csu.patch
  * fix-doc-build-on-SLE11SP3.diff
- Fix missing dependency on coreutils for initrd macros (boo#958562)
- Call missing initrd macro at post / postun (boo#958562)
- fix mkfs failure on ppc64 (or with sectorsize > 4k) (bsc#956819)
- Added patch: 0001-btrfs-progs-mkfs-use-correct-size-for-superblock-csu.patch
- update to 4.3.1
  * fixes
  * device delete: recognize 'missing' again
  * mkfs: long names are not trimmed when doing ssd check
  * support partitioned loop devices
  * other
  * replace several mallocs with on-stack variables
  * more memory allocation failure handling
  * add tests for bugs fixed
  * cmd-device: switch to new message printing helpers
  * minor code cleanups
- update to 4.3
  * mkfs
  * mixed mode is not forced for filesystems smaller than 1GiB
  * mixed mode broken with mismatching sectorsize and nodesize, fixed
  * print version info earlier
  * print devices sorted by id
  * do not truncate target image with --rootsize
  * fi usage:
  * don't print global block reserve
  * print device id
  * minor output tuning
  * other cleanups
  * calc-size:
  * div-by-zero fix on an empty filesystem
  * fix crash
  * bugfixes:
  * more superblock sanity checks
  * consistently round size of all devices down to sectorsize
  * misc leak fixes
  * convert: don't try to rollback with a half-deleted ext2_saved subvolume
  * other:
  * check: add progress indicator
  * scrub: enahced error message
  * show-super: read superblock from a given offset
  * add README
  * docs: update manual page for mkfs.btrfs, btrfstune, balance, convert and inspect-internal
  * build: optional build with more warnings (W=...)
  * build: better support for static checkers
  * build: html output of documentation
  * pretty-print: last_snapshot for root_item
  * pretty-print: stripe dev uuid
  * error reporting wrappers, introduced and example use
  * refactor open_file_or_dir
  * other docs and help updates
  * testing:
  * test for nodes crossing stripes
  * test for broken 'subvolume sync'
  * basic tests for mkfs, raid option combinations
  * basic tests for fuzzed images (check)
  * command intrumentation (eg valgrind)
  * print commands if requested
  * add README for tests
- build btrfsprogs-static package for 13.2 and Factory, package
  with static versions of the utilities, aimed for rescue environments
- update to 4.2.3
  - subvol sync: make it actually work again
  - scanning: do not scan already discovered filesystems (minor optimization)
  - convert: better error message in case the filesystem is not finalized
  - restore: off-by-one symlink path check fix
- update to 4.2.2
  - fi label: use fallback if the label ioctl is not available
  - convert: check nodesize constraints against commandline features (-O)
  - scrub: report status 'running' until all devices are finished
  - device scanning might crash in some scenarios
  - fi usage: print summary for non-root users
- update to 4.2.1
  - fix an off-by-one error in cross-stripe boundary check
  - convert: don't write uninitialized data to image
  - image:  don't loop with option -t0
  - image: don't create threads if compression is not requested
- Removed patches:
  * 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch
- make mkfs work with 64k nodesize again, notably fixes mkfs on ppc64
  (bsc#945229)
- Added patch:
  * 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch
- version 4.2
  * enhancements:
  * mkfs: do not create extra single chunks on multiple devices
  * resize: try to guess the minimal size, 'inspect min-dev-size'
  * qgroup assign: add option to schedule rescan
  * chunk-recover: be more verbose about the scanning process
  * fixes:
  * check:
  * find stripes crossing stripe boundary -- created by convert
  * print correct range for file hole when there are no extents
  and learn how to fix it
  * replace: more sanity checks
  * convert: concurrency fixes related to reporting progress
  * find-root: option -a will not skip the current root anymore
  * subvol list: fix occasional crash
  * do not create stripes crossing stripe boundary
  * build:
  * fixes for musl libc
  * preliminary support for android (not working yet, more code changes needed)
  * new EXTRA_CFLAGS and EXTRA_LDFLAGS
  * other:
  * lots of cleanups
  * tests: lots of updates, new tests, framework improvements
  * documentation updates
  * debugging: print-tree shows stripe length
- Removed patches (upstreamed):
  * 2104-get-min-size-for-resize.patch
  * 2105-move-min-resize-implementation-to-inspec.patch
  * 2106-inspect-add-command-min-dev-size.patch
- add warning before full balance starts (bsc#940467, fate#319317)
- Added patches:
  2000-btrfs-full-balance-warning.diff
- Add feature to get minimum size a filesystem can be resized to
  (FATE#317897).
- Added patches:
  * 2104-get-min-size-for-resize.patch
  * 2105-move-min-resize-implementation-to-inspec.patch
  * 2106-inspect-add-command-min-dev-size.patch
- version 4.1.2
  - mkfs: bugfix, previous version does not create entierly correct
    filesystem (has to be recreated)
- version 4.1.1
  * bugfixes
  - defrag: threshold overflow fix
  - fsck:
  - check if items fit into the leaf space
  - fix wrong nbytes
  - mkfs:
  - create only desired block groups for single device
  - preparatory work for fix on multiple devices
  * enhancements
  - new alias for 'device delete': 'device remove'
  * other
  - fix compilation on old gcc (4.3)
  - documentation updates
  - debug-tree: print nbytes
  - test: image for corrupted nbytes
  - corupt-block: let it kill nbytes
- spec: drop libacl dependency
- version 4.1
  * bugfixes
  - fsck.btrfs: no bash-isms
  - bugzilla 97171: invalid memory access (with tests)
  - receive:
  - cloning works with --chroot
  - capabilities not lost
  - mkfs: do not try to register bare file images
  - option --help accepted by the standalone utilities
  * enhancements
  - corrupt block: ability to remove csums
  - mkfs:
  - warn if metadata redundancy is lower than for data
  - options to make the output quiet (only errors)
  - mixed case names of raid profiles accepted
  - rework the output:
  - more comprehensive, 'key: value' format
  - subvol:
  - show:
  - print received uuid
  - update the output
  - new options to specify size units
  - sync:
  - grab all deleted ids and print them as they're removed,
  previous implementation only checked if there are any
  to be deleted - change in command semantics
  - scrub: print timestamps in days HMS format
  - receive:
  - can specify mount point, do not rely on /proc
  - can work inside subvolumes
  - send:
  - new option to send stream without data (NO_FILE_DATA)
  - convert:
  - specify incompat features on the new fs
  - qgroup:
  - show: distinguish no limits and 0 limit value
  - limit: ability to clear the limit
  - help for 'btrfs' is shorter, 1st level command overview
  - debug tree: print key names according to their C name
  * new
  - rescure zero-log
  - btrfsune:
  - rewrite uuid on a filesystem image
  - new option to turn on NO_HOLES incompat feature
  * deprecated
  - standalone btrfs-zero-log
  * other
  - testing framework updates
  - uuid rewrite test
  - btrfstune feature setting test
  - zero-log tests
  - more testing image formats
  - manual page updates
  - ioctl.h synced with current kernel uapi version
  - convert: preparatory works for more filesystems (reiserfs pending)
  - use static buffers for path handling where possible
  - add new helpers for send uilts that check memory allocations,
    switch all users, deprecate old helpers
  - Makefile: fix build dependency generation
  - map-logical: make it work again
- Install bash completion for btrfs.
- version 4.0
  * resize:
  * don't accept file as an argument (it's confusing)
  * print better error message in case of an error
  * restore: optionally restore metadata (time, mode, uid/gid)
  * receive: optionally enforce chroot
  * new rescue subcommand 'zero-log', same as btrfs-zero-log, but
    now also part of the main utility
  * check:
  * free space checks match kernel, fixes incorrect reports
  * convert: fix setting of checksum bit if --no-datasum is used
  * fsck.btrfs: don't print messages
  * fix quota rescan on PPC64 (mangled ioctl number)
  * test updates
  * documentation: files renamed to .asciidoc, misc fixups
- version 3.19.1
  - convert:
  - new option to specify metadata block size
  - --no-progress actually works
  - restore: properly handle the page boundary corner case
  - build fixes:
  - missing macro from public header, BTRFS_BUILD_VERSION
  - wrong handling of --enable-convert
  - fi usage: reports correct space for degraded mounts
  - other:
  - mkfs: help string updates
  - completion: added 'usage' subcommands
  - cleanups in qgroup code, preparatory work
- version 3.19
  - btrfs-image
  - restore can now run in parallel threads
  - fixed restore of multiple image from multiple devices onto a single dev
  - introduced metadump v2
  - check
  - make --init-csum-tree and --init-extent-tree work together
  - find-new
  - option to search through all metadata even if a root was already found
  - convert
  - show progress by default, can be turned off
  - corrupt-block
  - option to work on a specific root
  - bash completion script for all subcommands
- spec: convert to autotools
  Removed patch 0169-btrfs-progs-Check-metadata-mirrors-in-find-root.patch
- add COPYING
- version 3.18.2
  * qgroup show: print human readable sizes, options to say otherwise
  * check: new option to explicitly say no to writes
  * mkfs: message about trimming is not printed to stderr
  * fi show: fixed return value
  * tests: new infrastructure
  * btrfstune: force flag can be used together with seeding option
  * backtrace support is back
  * getopt cleanups
  * doc and help updates
- version 3.18.1
  - minor fixes
  - documentation updates
- version 3.18
  - mkfs - skinny-metadata feature is now on by default, first introduced in
    kernel 3.10
  - filesystem usage - give an overview of fs usage in a way that's more
    comprehensible than existing 'fi df'
  - device usage - more detailed information about per-device allocations
  - check:
  - option to set a different tree root byte number
  - ability to link lost files to lost+found, caused by a recent kernel bug
  - repair of severely corrupted fs (use with care)
  - convert - option to show progress
  - subvol create - print the commit mode inline, print the global mode only if --verbose
  - other updates: musl-libc support, coverity bugfixes, new test images,
    documentation
- Removed patches (upstreamed):
  * 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch
  * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
  * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
  * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch
  * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch
  * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch
  * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch
  * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch
  * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch
  * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch
  * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch
  * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch
  * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch
  * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch
  * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch
  * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch
  * 0028-btrfs-progs-rework-calculations-of-fi-usage.patch
  * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch
  * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch
  * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch
- version 3.17.3
  - convert: fix conversion of sparse ext* filesystems
  - show: resolve to the correct path
  - fsck: more verbose error for root dir problems
- version 3.17.2
  - check improvements
  - add ability to replace missing dir item/dir indexes
  - fix missing inode items
  - create missing root dirid
  - corrupt block: enhancements for testing fsck
  - zero-log: able to reset a fs with bogus log tree pointer (bko#72151)
- package mkinitrd scripts conditionally (bsc#893577)
- spec: minor updates
- version 3.17.1
  - fi df: argument handling
  - fix linking with libbtrfs
  - replace: better error reporting
  - fi show: fixed stall if run concurrently with balance
  - check: fixed argument parsing for --subvol-extents
  - fi df: SI prefixes corrected
- Added patches:
  * fix-doc-build-on-SLE11SP3.diff
- Removed patches:
  * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch
  * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch
- Modified patches:
  * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
  * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
  * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch
- version 3.17
  - check: --init-csum-tree acutally does something useful, rebuilds the whole
    csum tree
  - /dev scanning for btrfs devices is gone
  - /proc/partitions scanning is gone, blkid is used exclusively
  - new subcommand subvolume sync
  - filesystem df: new options to set unit format
  - convert: allow to copy label from the origin, or specify a new one
- Modified patches:
  * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
  * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
  * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch
  * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch
  * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch
  * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch
  * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch
  * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch
  * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch
  * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch
  * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch
  * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch
  * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch
  * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch
  * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch
  * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch
  * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch
  * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch
- Added patches:
  * 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch
  * 0028-btrfs-progs-rework-calculations-of-fi-usage.patch
  * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch
  * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch
- Removed patches:
  * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch
  * 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch
  * 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch
  * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch
  * 0023-btrfs-progs-print-B-for-bytes.patch
  * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch
  * 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch
  * 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch
- version 3.16.2
  - fsck: handle bad extent mapping
  - image: make it work on a balanced fs
  - btrfs-show-super: print flags in human readable way
  - documentation updates
- version 3.16.1
  - library version defines
  - subvol list: -R to print received UUID
  - fixed detection of multiple mounts on the same directory
  - restore: misc fixes
  - other fixes
- Modified patches (sync with pending upstream versions):
  * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
  * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
  * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch
  * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch
  * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch
  * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch
  * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch
  * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch
  * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch
- Removed patch: library-version-defines.patch (upstream)
- send-stream API users updatd, drop the workaround
- Removed patch: send-stream-api-wokaround.patch
- workaround for send api breakage
- Added patch: send-stream-api-wokaround.patch
- add api versioning and package version.h (now 0.1.1)
- Added patches:
  * library-version-defines.patch
- version 3.16
  - show-super: skip unrecognized sb, add option to force
  - debug-tree: print tree by id
  - mkfs: new option to specify UUID
  - receive: new option to limit number of errors
  - check: new option to verify quotas
  - check: reduced memory requirements
  - check: new option to print extent sharing
  - restore: check length before decompression
  - restore: more error handling
  - balance: new filter 'limit'
  - recover: allow to read all sb copies
  - restore: option to loop during restoring
  - mkfs: drop experimental notice
  - btrfstune: new option to force dangerous changes
  - documentation updates
- Deleted patches (upstream):
  * 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch
  * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch
  * 0201-btrfs-progs-import-ulist.patch
  * 0202-btrfs-progs-add-quota-group-verify-code.patch
  * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch
  * 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch
  * btrfs-progs-canonicalize-pathnames-for-device-commands
- Refreshed patches:
  * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch
  * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
  * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
  * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch
  * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch
  * 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch
- refresh references on the following patches:
  * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch
  * 0201-btrfs-progs-import-ulist.patch
  * 0202-btrfs-progs-add-quota-group-verify-code.patch
  * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch
- btrfs-progs: ignore orphaned qgroups by default
- Added patch:
  * 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch
- btrfs-progs: show extent state for a subvolume (bnc#865621)
- Added patch:
  * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch
- btrfs-progs: canonicalize pathnames for device commands (bnc#880486).
- Added patch:
  * btrfs-progs-canonicalize-pathnames-for-device-commands
- fsck: fix checking on filesystems with large sectorsize (bnc#872286)
- Added patches:
  * 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch
- Do not package btrfs-find-root and btrfs-select-super by default.
- Removed printing byte number for every slot (bnc#872364).
- Removed patch:
  * 0170-btrfs-progs-In-find-root-dump-bytenr-for-every-slot.patch
- update to upstream 3.14.2
  - man: separate pages for all subcommands
  - minor bugfixes
  - spec: removed upstreamed patches, update build dependencies
- Added patches:
  * 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch
- Removed patches:
  * 0001-Btrfs-progs-fix-check-to-test-trim-support.patch
  * 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch
  * 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch
  * 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch
  * 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch
  * 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch
  * 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch
- add quota group verify patches, sent to list near end of the week starting
  5/4/2014
  - updates btrfsck with the ability to verify quota groups
- Update the changelog with some sad version of diffstat output to meet
  requirements.
- Added patches:
  * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch
  * 0201-btrfs-progs-import-ulist.patch
  * 0202-btrfs-progs-add-quota-group-verify-code.patch
- add quota group verify patches, sent to list near end of the week starting
  5/4/2014
  - updates btrfsck with the ability to verify quota groups
- update to upstream 3.14.1
- mkfs:
  - fix TRIM detection
  - do not zero-out end of device unconditionally
  - no crash with --features option
- fsck:
  - clear log tree in repair mode
  - check reloc roots
- btrfs - reworked space reporting (bnc#873106)
  - btrfs fi usage - new command
  - btrfs dev usage - new command
  - btrfs fi df - enhanced output with GlobalReserve
- Removed patches:
  * 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch
- Added patches:
  * 0001-Btrfs-progs-fix-check-to-test-trim-support.patch
  * 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch
  * 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch
  * 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch
  * 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch
  * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch
  * 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch
  * 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch
  * 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch
  * 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch
  * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
  * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
  * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch
  * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch
  * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch
  * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch
  * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch
  * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch
  * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch
  * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch
  * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch
  * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch
  * 0023-btrfs-progs-print-B-for-bytes.patch
  * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch
  * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch
  * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch
  * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch
  * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch
  * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch
  * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch
  * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch
- own mkinitrd directories
- add missing symbol to library (bnc#873164)
- add version dependency for devel package
- Added patches:
  * 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch
- fsck: fixes and enahancements to --init-extent-tree mode
- fsck: chunk-recover updates
- scrub: add force option -f
- send: check if subvolumes are read-only
- subvol snapshot: add options to affect commit behaviour
- btrfs: add properties command group
- restore: add dry-run option
- restore: fix restoring of compressed files
- mkfs: support for no-holes feature
- mkfs: option -r deals with hardlinks and relative paths
- mkfs: discard phase is interruptible
- documentation updates
- cleaned spec file
- Removed patches:
  * 0162-btrfs-progs-fix-loop-device-mount-checks.patch
  * 0165-Revert-btrfs-progs-update-options-in-find-root.c.patch
  * 0166-Btrfs-progs-add-some-verbose-output-to-find-root.patch
- bump version to 3.12
- update tarball and remove upstreamed patches
- fsck, image, restore: various improvements and fixes
- btrfs: quota rescan (fate#312751)
- fsck updates
- more mkfs sanity checks
- qgroup rescan wait
- Added patches:
  * 0050-Btrfs-progs-commit-the-csum_root-if-we-do-init-csum-.patch
  * 0051-btrfs-progs-Fix-getopt-on-arm-ppc-platforms.patch
  * 0052-btrfs-progs-fix-duplicate-__-su-typedefs-on-ppc64.patch
  * 0053-btrfs-progs-use-reentrant-localtime.patch
  * 0054-btrfs-progs-don-t-have-to-report-ENOMEDIUM-error-dur.patch
  * 0055-Btrfs-progs-added-btrfs-quota-rescan-w-switch-wait.patch
  * 0056-btrfs-progs-fix-qgroup-realloc-inheritance.patch
  * 0057-Btrfs-progs-fix-restore-command-leaving-corrupted-fi.patch
  * 0058-btrfs-progs-avoid-write-to-the-disk-before-sure-to-c.patch
  * 0059-btrfs-progs-error-if-device-for-mkfs-is-too-small.patch
  * 0060-btrfs-progs-error-if-device-have-no-space-to-make-pr.patch
  * 0061-btrfs-progs-calculate-available-blocks-on-device-pro.patch
  * 0062-Btrfs-progs-keep-track-of-transid-failures-and-fix-t.patch
- Change udev rule filename in setup-btrfs.sh to
  /usr/lib/udev/rules.d/64-btrfs.rules from
  from /usr/lib/udev/rules.d/80-btrfs.rules (bnc#839960 comment#7)
- Remove udev rules file - udev packages one itself (bnc#839960).
- update to upstream master (194aa4a1)
  - btrfs-restore: deal with NULL returns from read_node_slot
  - btrfs-restore: use the correct leafsize when reading the FS location
  - btrfs-find-root: Add options to control generation and level
  - btrfsck: fix incorrect casting on items in the corrupt_blocks tree
  - Btrfs-progs: fix closing of devices
  - Btrfs-progs: enhance btrfs-image to restore image onto multiple disks
  - Btrfs-progs: cleanup btrfs-image usage
  - Btrfs-progs: delete fs_devices itself from fs_uuid list before freeing
  - Btrfs-progs: skip open devices which is missing
  - Btrfs-progs: fix misuse of skinny metadata in btrfs-image
  - Btrfs-progs: recover raid0/raid10/raid5/raid6 metadata chunk
  - Btrfs-progs: Add chunk rebuild function for RAID1/SINGLE/DUP
  - Btrfs-progs: introduce list_{first, next}_entry/list_splice_tail{_init}
  - Btrfs-progs: Add chunk recover function - using old chunk items
  - Btrfs-progs: Add block group check funtion
  - Btrfs-progs: extend the extent cache for the device extent
  - Btrfs-progs: use rb-tree instead of extent cache tree for fs/file roots
  - Btrfs-progs: introduce common insert/search/delete functions for rb-tree
  - Btrfs-progs: cleanup similar code in open_ctree_* and close_ctree
  - Btrfs-progs: Don't free the devices when close the ctree
  - Btrfs-progs: don't close the file descriptor 0 when closing a device
  - Btrfs-progs: fix missing recow roots when making btrfs filesystem
- Add fix for passing super_nr while opening ctree
- btrfs-progs-mkfs-default-extref.diff: turn on extended refs by
  default, (aka hardlink count limtitation) (bnc#835695)
- added 0040-btrfs-progs-fix-loop-device-mount-checks.patch: fix
  loop mount detection again (bnc#834173)
- Simplify checks in mkinitrd scripts.
  They are always true because they come from the same package
  Use relative paths to binaries
- Move udev rules to /usr.
- Adjust rules to call binary from /usr
- Simplify fsck.btrfs, its just a dummy until fixed
- update to upstream master (f00dd8386a57d241d0f7c)
- Make requirement on libattr-devel explicit
- initrd support: add module (bnc#750185, bnc#727383)
- set correct file mode if writing replacement fsck
- fix build failure
- add btrfs-debug-tree to initrd
- adjust fs size to correct size (bnc#744593)
- man page documentation updates
- do not package obsolete utilities
- mkfs: store correct size of device in superblock (bnc#730103)
- updated restriper/balance commands to match kernel version
- place binaries in /usr tree (UsrMerge project)
- adjust mkinitrd scrippt accordingly
- add btrfsck repair options for:
  - rebuild extent records
  - fix block group accounting
  - reset csums for rescue nodatasum mount
  - prune corrupt extent allocation tree blocks
- device scanning fixes for dm and multipath (bnc#749540)
- initrd support: move btrfs device scan after block device setup
- documentation updates
- add csize for file commpressed size
- updated restore utility
- patch license to follow spdx.org standard
- btrfs-progs-fix-open_ctree_usage_segfaults.patch: fix
  segfaults from bnc#710486 due to unchecked usage of return
  value of open_ctree()
  [fixed compilation warnings]
- pull upstream, replace existing patches, spec update
- update 'restore' utility
  - lzo support
  - tools may now take earlies superblock when opening the fs
  - other fixes
- pull integration-20111030 branch
  - mkfs: force mkfs if desired
  - other fixes
- add btrfs-dump-super to mkinitrd
- other fixes
  - skip non-existent devices or without media
  - documentation updates
  - scrubbing single device
  - graceful error handling when opening fs fails
- updated mkinitrd script to scan devices before mount (bnc#727383)
- add several tools to mkinitrd if root fs is btrfs
- pull upstream branch and delete local patches
- btrfsck: ignore -a (bnc#655906)
- btrfsck: fix strerror value
- Remove redundant tags/sections from specfile
- Use %_smp_mflags for parallel build
- add patch for local version override as we do not build from
  git, and avoid doubled "Btrfs" in output of 'btrfs'
- reorder help for 'get-default' right after 'set-default'
- add option -p to print parent subvolume
- add subvolume 'get-default' subsubcommand
- remove debugging printf from
  0001-Btrfs-progs-add-a-btrfs-select-super-command-to-over.patch
- add support for currently available kernel features:
  - add scrub subcommand
  - scan /proc/partitions by default (or use --all-devices for all)
  - mkfs fixes and improvements
  - documentation fixes
- fix failing on deleted loop mounts (bnc#697671)
- update from git:
  - add btrfs-select-super utility
  - add btrfs-label utility
  - allow mixed data+metadata (option --mixed)
  - allow populating new filesystem with files (option --rootdir)
  - allow discard support in mkfs
  - lzo support
  - deprecate 'btrfsctl' 'btrfs-vol' 'btrfs-show'
  - other bugfixes and documentation improvements
- change to a hardlink
- add link for fsck.btrfs (bnc#665899)
- update to v0.19-35-g1b444cd:
  * used space accounting fix for the converter
  * Add btrfs-list for listing subvolumes
  * Add new util: 'btrfs'
  * multidevice support for check_mounted
  * check slash in deleting subvolumes
  * Add btrfsck option to select the super block copy
  * btrfs-debug-tree: add -d option to print only the device mapping
- fix crash on creating filesystems (bnc#603620)
- revert last change (bnc#599224#c3)
- add hardlink from fsck.btrfs (bnc#599224)
- fix memory leak (bnc#537633)
- Updated to latest repo version.
  - used space accounting fix for the converter
  - btrfsctl: add snapshot/subvolume destroy ioctl
  - btrfsck: check root back/forward references
  - Add btrfs-map-logical program to map and read logical block numbers
- build btfs-convert (bnc#572912)
- enable parallel build
- added Supplements
- move apps to /sbin
- update to 0.19:
  - build with rpm optflags
  - install man pages
  - fix leak in extends checking (bnc#523447)
- Initial package (0.18)

==== c-ares ====
Version update (1.17.0 -> 1.17.1)

- update to 1.17.1:
    Travis: add iOS target built with CMake (#378)
    Issue #377 suggested that CMake builds for iOS with c-ares were broken. This PR adds an automatic Travis build for iOS CMake.
  - fix build
    External projects were using non-public header ares_dns.h, make public again (#376)
    It appears some outside projects were relying on macros in ares_dns.h, even
    though it doesn't appear that header was ever meant to be public.  That said,
    we don't want to break external integrators so we should distribute this header
    again.
  - note that so versioning has moved to configure.ac
  - note about 1.17.1
  - fix sed gone wrong
    autotools cleanup (#372)
  * buildconf: remove custom logic with autoreconf
- remove missing_header.patch (upstream)

==== colord ====
Subpackages: colord-color-profiles libcolord2 libcolorhug2

- allow access to /usr/local/share/color in AppArmor profile (boo#1180898)

==== desktop-data-openSUSE ====

- Move call-browser and desktop-launch symlink to xdg-utils.

==== dnsmasq ====
Version update (2.82 -> 2.83)

- Update to 2.83:
  * bsc#1177077: Fixed DNSpooq vulnerabilities
  * Use the values of --min-port and --max-port in outgoing
    TCP connections to upstream DNS servers.
  * Fix a remote buffer overflow problem in the DNSSEC code.
    Any dnsmasq with DNSSEC compiled in and enabled is vulnerable
    to this, referenced by CVE-2020-25681, CVE-2020-25682,
    CVE-2020-25683 CVE-2020-25687.
  * Be sure to only accept UDP DNS query replies at the address
    from which the query was originated. This keeps as much
    entropy in the {query-ID, random-port} tuple as possible, to
    help defeat cache poisoning attacks. Refer: CVE-2020-25684.
  * Use the SHA-256 hash function to verify that DNS answers
    received are for the questions originally asked. This replaces
    the slightly insecure SHA-1 (when compiled with DNSSEC) or
    the very insecure CRC32 (otherwise). Refer: CVE-2020-25685
  * Handle multiple identical near simultaneous DNS queries better.
    Previously, such queries would all be forwarded independently.
    This is, in theory, inefficent but in practise not a problem,
    _except_ that is means that an answer for any of the forwarded
    queries will be accepted and cached.
    An attacker can send a query multiple times, and for each
    repeat, another {port, ID} becomes capable of accepting the
    answer he is sending in the blind, to random IDs and ports.
    The chance of a succesful attack is therefore multiplied by the
    number of repeats of the query. The new behaviour detects
    repeated queries and merely stores the clients sending repeats
    so that when the first query completes, the answer can be sent
    to all the clients who asked. Refer: CVE-2020-25686.

==== dosfstools ====
Version update (4.1 -> 4.1+git.1610658652.9443732)

- Update to version 4.1+git.1610658652.9443732 (bsc#1172863):
  * testsuite: Add mkfs test for 600MB large 4K disk
  * mkfs.fat: Do not show verbose messages not relevant to selected FAT size
  * mkfs.fat: Fix text of verbose messages
  * mkfs.fat: Fix limits for number of clusters
  * mkfs.fat: Fix calculation of FAT32 cluster size on non 512 bytes sector disks
  * mkfs.fat: Fix printing number of sectors
  * mkfs.fat: Align total number of sectors to be multiple of sectors per track
  * testsuite: Add referenceFAT32mbr test data to dist_check_DATA
  * manpages: Escape dot in fsck.fat manpage at the beginning of the line
  * fsck.fat: properly check for valid "." and ".." entries

==== elfutils-debuginfod ====

- Add upstream config-do-not-define-DEBUGINFOD_URLS-environment-var.patch
  in order to fix boo#1180306.

==== findutils ====
Version update (4.7.0 -> 4.8.0)

- update upstream signing key
- remove deprecated texinfo packaging macros
- run spec-cleaner
- Update to 4.8.0.
  Announcement: https://savannah.gnu.org/forum/forum.php?forum_id=9914
- findutils.spec:
  - Source0: Fix download URL: remove "pub/".
  - %check: Output the content of all test-suite files in case of errors.
- Remove now-upstream patches:
  - disable-null-ptr-test.patch
  - findutils-gnulib-disable-test-float.patch
  - findutils-gnulib-test-avoid-FP-perror-strerror.patch

==== flatpak ====
Version update (1.8.4 -> 1.10.0)
Subpackages: libflatpak0 system-user-flatpak

- Update to version 1.10.0:
  + The major new feature in this series compared to 1.8 is the
    support for the new repo format which should make updates
    faster and download less data.
  + The systemd generator snippets now call flatpak
  - -print-updated-env in place of a bunch of shell for better
    login performance.
  + The .profile snippets now disable GVfs when calling flatpak to
    avoid spawning a gvfs daemon when logging in via ssh.
  + Build fixes for GCC 11.
  + Flatpak now finds the pulseaudio sockets better in uncommon
    configurations.
  + Sandboxes with network access it now also has access to the
    systemd-resolved socket to do dns lookups.
  + Flatpak supports unsetting env vars in the sandbox using
  - -unset-env, and --env=FOO= now sets FOO to the empty string
    instead of unsetting it.
  + Similarly the spawn portal has an option to unset an env var.
  + The spawn portal now has an option to share the pid namespace
    with the sub-sandbox.
- Update to version 1.8.5 (CVE-2021-21261):
  + This is a security update that fixes a sandbox escape where a
    malicious application can execute code outside the sandbox by
    controlling the environment of the "flatpak run" command when
    spawning a sub-sandbox.

==== gcr ====
Version update (3.38.0 -> 3.38.1)
Subpackages: gcr-data gcr-prompter gcr-ssh-askpass gcr-viewer libgck-1-0 libgcr-3-1 typelib-1_0-Gck-1 typelib-1_0-Gcr-3

- Update to version 3.38.1:
  + ui: Set "use-underline" for GcrImportButton.
  + Updated translations.

==== gnome-shell ====
Version update (3.38.2 -> 3.38.3)
Subpackages: gnome-shell-calendar

- Update to version 3.38.3:
  + Fix disappearing app grid.
  + Fix screenshots of unredirected fullscreen windows on X11.
  + Fix storing VPN secrets.
  + Fix glitches in overview transitions.
  + Improve login screen accessibility.
  + Fixed crashes.
  + Misc. bug fixes and cleanups.
  + Updated translations.
- Add gnome-shell-jsc#SLE-16051-Input-method-recommendation.patch:
  launch recommended input engines when Gnome-shell init in CJK
  regions (jsc#SLE-16051, glgo#GNOME/gnome-shell!1563).

==== gpg2 ====
Version update (2.2.25 -> 2.2.27)
Subpackages: dirmngr

- GnuPG 2.2.27:
  * gpgconf: Fix case with neither local nor global gpg.conf
  * gpgconf: Fix description of two new options
- includes changes from 2.2.26:
  * gpg: New AKL method "ntds"
  * gpg: Fix --trusted-key with fingerprint arg
  * scd: Fix writing of ECC keys to an OpenPGP card
  * scd: Make an USB error fix specific to SPR532 readers
  * dirmngr: With new LDAP keyservers store the new attributes.
    Never store the useless pgpSignerID. Fix a long standing
    bug storing some keys on an ldap server.
  * dirmngr: Support the new Active Direcory LDAP schema for
    keyservers
  * dirmngr: Allow LDAP OpenPGP searches via fingerprint
  * dirmngr: Do not block other threads during keyserver LDAP calls
  * Support global configuration files
  * Fix the iconv fallback handling to UTF-8

==== gstreamer ====
Version update (1.18.2 -> 1.18.3)
Subpackages: gstreamer-utils libgstreamer-1_0-0 typelib-1_0-Gst-1_0

- Update to version 1.18.3:
  + Highlighted bugfixes:
  - Fix ogg playback regression for ogg files that also have ID3
    or APE tags
  - compositor: fix artefacts and invalid memory access when
    blending subsampled formats
  - Exported mini object ref/unref/copy functions for use in
    bindings such as gstreamer-sharp
  - Add support for Apple silicon (M1) to cerbero package builder
  - Ship RIST plugin in binary packages
  - Various stability, performance and reliability improvements
  - Memory leak fixes
  - Build fixes
  + gstreamer:
  - gst: Add non-inline ref/unref/copy/replace methods for
    various mini objects (buffer, bufferlist, caps, context,
    event, memory, message, promise, query, sample, taglist, uri)
    for use in bindings such as gstreamer-sharp.
  - harness: don't use GST_DEBUG_OBJECT with GstHarness which is
    not a GObject.

==== gstreamer-devtools ====
Version update (1.18.2 -> 1.18.3)
Subpackages: libgstvalidate-1_0-0 typelib-1_0-GstValidate-1_0

- Update to version 1.18.3:
  + No changes

==== gstreamer-editing-services ====
Version update (1.18.2 -> 1.18.3)
Subpackages: libges-1_0-0 typelib-1_0-GES-1_0

- Update to version 1.18.3:
  + launch: Ensure to add required ref to profiles from project
  + tests: fix meson test env setup to make sure we use the right
    gst-plugin-scanner

==== gstreamer-plugins-bad ====
Version update (1.18.2 -> 1.18.3)
Subpackages: gstreamer-transcoder libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstcodecs-1_0-0 libgstisoff-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgstsctp-1_0-0 libgsttranscoder-1_0-0 libgsturidownloader-1_0-0 libgstvulkan-1_0-0 libgstwayland-1_0-0 libgstwebrtc-1_0-0 typelib-1_0-GstTranscoder-1_0

- Update to version 1.18.3:
  + assrender: fix mutex handling in certain flushing/error
    situations
  + dvbsuboverlay: Add support for dynamic resolution update
  + dashsink: fix critical log of dynamic pipeline
  + d3d11shader: Fix ID3DBlob object leak
  + d3d11videosink: Prepare window once streaming started
  + decklinkaudiosrc: Fix duration of the first audio frame after
    each discont
  + intervideosrc: fix negotiation of interlaced caps
  + msdk:
  - Needn't close mfx session when failed, fixes double free /
    potential crash
  - Check GstMsdkContext instead of mfxSession instance
  + srt: fix locking when retrieving stats
  + rtmp2src: fix leaks when connection is cancelled during startup
    or connection fails

==== gstreamer-plugins-base ====
Version update (1.18.2 -> 1.18.3)
Subpackages: libgstallocators-1_0-0 libgstapp-1_0-0 libgstaudio-1_0-0 libgstfft-1_0-0 libgstgl-1_0-0 libgstpbutils-1_0-0 libgstriff-1_0-0 libgstrtp-1_0-0 libgstrtsp-1_0-0 libgstsdp-1_0-0 libgsttag-1_0-0 libgstvideo-1_0-0 typelib-1_0-GstAudio-1_0 typelib-1_0-GstPbutils-1_0 typelib-1_0-GstTag-1_0 typelib-1_0-GstVideo-1_0

- Update to version 1.18.3:
  + audiorate: Make buffer writable before changing its metadata
  + compositor: fix blending of subsampled components
  + decodebin3:
  - When reconfiguring a slot make sure that the ghostpad is
    unlinked
  - Release selection lock when pushing EOS
  + encodebasebin: Ensure that parsers are compatible with selected
    encoders
  + tagdemux: resize and trim buffer in place to fix interaction
    with oggdemux
  + videoaggregator: Pop out old buffers on timeout
  + video-blend: fix blending 8-bit and 16-bit frames together
  + appsrc: fix signal documentation
  + gl: document some GL caps specifics
  + libvisual: workaround clang compiler warning

==== gstreamer-plugins-good ====
Version update (1.18.2 -> 1.18.3)
Subpackages: gstreamer-plugins-good-extra gstreamer-plugins-good-gtk gstreamer-plugins-good-jack gstreamer-plugins-good-qtqml

- Update to version 1.18.3:
  + splitmuxsink:
  - Avoid deadlock when releasing a pad from a running muxer
  - Fix bogus fragment split
  + v4l2object: Map correct video format for RGBA
  + videoflip: fix possible crash when changing
    video-direction/method while running

==== gstreamer-plugins-libav ====
Version update (1.18.2 -> 1.18.3)

- Update to version 1.18.3:
  + avauddec: Drain decoder on decoding failure, fixes timestamps
    after decoding errors

==== gstreamer-plugins-ugly ====
Version update (1.18.2 -> 1.18.3)

- Update to version 1.18.3:
  + No changes

==== harfbuzz ====
Subpackages: libharfbuzz-gobject0 libharfbuzz-icu0 libharfbuzz0 typelib-1_0-HarfBuzz-0_0

- Re-enable graphite2 support: TexLive relies on this to be
  present:
  + Pass -Dgraphite=enabled to meson.
  + Add pkgconfig(graphite2) BuildRequires.
- Switch to meson buildsystem:
  + Add meson BuildRequires and macros.
  + Replace gcc-c++ for generic c++_compiler BuildRequires.
  + Add meson_test macro in check section, run tests during build.
  + Drop pkgconfig(graphite2) BuildRequires: No longer build
    graphite2 support, following upstream that disables this by
    default.
  + Stop packaging gtk-docs, pass -Ddocs=disabled to meson, this
    way we might avoid a build-cycle and since we did not have a
    explicit docs subpackage, just silently drop them.

==== iptables ====
Version update (1.8.6 -> 1.8.7)
Subpackages: libip4tc2 libip6tc2 libxtables12 xtables-plugins

- Update to release 1.8.7
  * iptables-nft:
  * Improved performance when matching on IP/MAC address prefixes
    if the prefix is byte-aligned. In ideal cases, this doubles
    packet processing performance.
  * Dump user-defined chains in lexical order. This way ruleset
    dumps become stable and easily comparable.
  * Avoid pointless table/chain creation. For instance,
    `iptables-nft -L` no longer creates missing base-chains.

==== jack ====
Version update (1.9.14 -> 1.9.16)

- Removed portaudio build dependency to prevent cycles
- Update to 0.9.16
  - Fix/revert a change in how meta-data definitions were exposed
    (regression in 1.9.15)
  - Remove jack-router Windows code from the repository
- Changes from 0.9.15
  - Automated builds for macOS and Windows
    (see jackaudio/jack2-releases repository)
  - Adapt wscript Windows build configuration to match old v1.9.11
    installer
  - Bump maximum default number of clients and ports
    (now 256 clients and 2048 ports)
  - Delete various macOS and Windows-related files from the source
    code (no longer relevant)
  - Mark JACK-Session as deprecated, please use NSM instead
  - Remove unnecessary GPL include from LGPL code
  - Split example-clients and tools, as done in JACK1 many years
    ago (WIP)
  - Write Windows registry key during installation, so 3rd parties
    can find jackd.exe (as HKLM\Software\JACK\Location)
  - jack_control: Fix handling of dbus bytes
  - jack_control: Return a proper exit status on DBus exception
  - jack_property: Fix possible crash with "-l" argument usage
  - jack_wait: Add client name option -n/--name
  - Fix compilation of documentation
  - Fix compilation of mixed mode with meta-data enabled
  - Fix compilation with mingw
  - Fix client-side crash if initial meta-data DB setup fails
  - Fix macOS semaphore usage, so it works again
  - Several fixes for Windows
  - Several minor fixes and grammar corrections

==== kalgebra ====
Subpackages: kalgebra-lang

- Add compatibility with qml-autoreqprov

==== kdiagram ====
Version update (2.7.0 -> 2.8.0)
Subpackages: libKChart2 libKGantt2 libkchart-lang libkgantt-lang

- Update to 2.8.0
  * KGantt:
    + Fix Bug 430452 - Printing with row labels on multiple pages
    does not work well (kde#430452)
    + Add support for single page printout
    + Add support for printing on multiple pages, both horizontally
    and vertical
    + Make it possible to use a printer friendly palette to allow
    for printing on white paper when using a dark theme
    (kde#426240)
    + Add 'zoom' of datetime header using mouse

==== kernel-64kb ====
Version update (5.10.7 -> 5.10.9)

- Linux 5.10.9 (bsc#1012628).
- btrfs: reloc: fix wrong file extent type check to avoid false
  ENOENT (bsc#1012628).
- btrfs: prevent NULL pointer dereference in extent_io_tree_panic
  (bsc#1012628).
- ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for
  HP machines (bsc#1012628).
- ALSA: doc: Fix reference to mixart.rst (bsc#1012628).
- ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad X395
  (bsc#1012628).
- ASoC: dapm: remove widget from dirty list on free (bsc#1012628).
- x86/hyperv: check cpu mask after interrupt has been disabled
  (bsc#1012628).
- drm/amdgpu: add green_sardine device id (v2) (bsc#1012628).
- drm/amdgpu: fix DRM_INFO flood if display core is not supported
  (bug 210921) (bsc#1012628).
- drm/amdgpu: add new device id for Renior (bsc#1012628).
- drm/i915: Allow the sysadmin to override security mitigations
  (bsc#1012628).
- drm/i915/gt: Limit VFE threads based on GT (bsc#1012628).
- drm/i915/backlight: fix CPU mode backlight takeover on LPT
  (bsc#1012628).
- drm/bridge: sii902x: Refactor init code into separate function
  (bsc#1012628).
- dt-bindings: display: sii902x: Add supply bindings
  (bsc#1012628).
- drm/bridge: sii902x: Enable I/O and core VCC supplies if present
  (bsc#1012628).
- tracing/kprobes: Do the notrace functions check without kprobes
  on ftrace (bsc#1012628).
- tools/bootconfig: Add tracing_on support to helper scripts
  (bsc#1012628).
- ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null
  when IS_ERR (bsc#1012628).
- ext4: fix wrong list_splice in ext4_fc_cleanup (bsc#1012628).
- ext4: fix bug for rename with RENAME_WHITEOUT (bsc#1012628).
- cifs: check pointer before freeing (bsc#1012628).
- cifs: fix interrupted close commands (bsc#1012628).
- riscv: Drop a duplicated PAGE_KERNEL_EXEC (bsc#1012628).
- riscv: return -ENOSYS for syscall -1 (bsc#1012628).
- riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL (bsc#1012628).
- riscv: Fix KASAN memory mapping (bsc#1012628).
- mips: fix Section mismatch in reference (bsc#1012628).
- mips: lib: uncached: fix non-standard usage of variable 'sp'
  (bsc#1012628).
- MIPS: boot: Fix unaligned access with
  CONFIG_MIPS_RAW_APPENDED_DTB (bsc#1012628).
- MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumps
  (bsc#1012628).
- MIPS: relocatable: fix possible boot hangup with KASLR enabled
  (bsc#1012628).
- RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd()
  (bsc#1012628).
- ACPI: scan: Harden acpi_device_add() against device ID overflows
  (bsc#1012628).
- xen/privcmd: allow fetching resource sizes (bsc#1012628).
- compiler.h: Raise minimum version of GCC to 5.1 for arm64
  (bsc#1012628).
- mm/vmalloc.c: fix potential memory leak (bsc#1012628).
- mm/hugetlb: fix potential missing huge page size info
  (bsc#1012628).
- mm/process_vm_access.c: include compat.h (bsc#1012628).
- dm raid: fix discard limits for raid1 (bsc#1012628).
- dm snapshot: flush merged data before committing metadata
  (bsc#1012628).
- dm integrity: fix flush with external metadata device
  (bsc#1012628).
- dm integrity: fix the maximum number of arguments (bsc#1012628).
- dm crypt: use GFP_ATOMIC when allocating crypto requests from
  softirq (bsc#1012628).
- dm crypt: do not wait for backlogged crypto request completion
  in softirq (bsc#1012628).
- dm crypt: do not call bio_endio() from the dm-crypt tasklet
  (bsc#1012628).
- dm crypt: defer decryption to a tasklet if interrupts disabled
  (bsc#1012628).
- stmmac: intel: change all EHL/TGL to auto detect phy addr
  (bsc#1012628).
- r8152: Add Lenovo Powered USB-C Travel Hub (bsc#1012628).
- btrfs: tree-checker: check if chunk item end overflows
  (bsc#1012628).
- ext4: don't leak old mountpoint samples (bsc#1012628).
- io_uring: don't take files/mm for a dead task (bsc#1012628).
- io_uring: drop mm and files after task_work_run (bsc#1012628).
- ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
  (bsc#1012628).
- ARC: build: add uImage.lzma to the top-level target
  (bsc#1012628).
- ARC: build: add boot_targets to PHONY (bsc#1012628).
- ARC: build: move symlink creation to arch/arc/Makefile to
  avoid race (bsc#1012628).
- ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent
  with defaults on xt875 (bsc#1012628).
- ath11k: fix crash caused by NULL rx_channel (bsc#1012628).
- netfilter: ipset: fixes possible oops in mtype_resize
  (bsc#1012628).
- ath11k: qmi: try to allocate a big block of DMA memory first
  (bsc#1012628).
- btrfs: fix async discard stall (bsc#1012628).
- btrfs: merge critical sections of discard lock in workfn
  (bsc#1012628).
- btrfs: fix transaction leak and crash after RO remount caused
  by qgroup rescan (bsc#1012628).
- regulator: bd718x7: Add enable times (bsc#1012628).
- ethernet: ucc_geth: fix definition and size of
  ucc_geth_tx_global_pram (bsc#1012628).
- ARM: dts: ux500/golden: Set display max brightness
  (bsc#1012628).
- habanalabs: adjust pci controller init to new firmware
  (bsc#1012628).
- habanalabs/gaudi: retry loading TPC f/w on -EINTR (bsc#1012628).
- habanalabs: register to pci shutdown callback (bsc#1012628).
- staging: spmi: hisi-spmi-controller: Fix some error handling
  paths (bsc#1012628).
- spi: altera: fix return value for altera_spi_txrx()
  (bsc#1012628).
- habanalabs: Fix memleak in hl_device_reset (bsc#1012628).
- hwmon: (pwm-fan) Ensure that calculation doesn't discard big
  period values (bsc#1012628).
- lib/raid6: Let $(UNROLL) rules work with macOS userland
  (bsc#1012628).
- kconfig: remove 'kvmconfig' and 'xenconfig' shorthands
  (bsc#1012628).
- spi: fix the divide by 0 error when calculating xfer waiting
  time (bsc#1012628).
- io_uring: drop file refs after task cancel (bsc#1012628).
- bfq: Fix computation of shallow depth (bsc#1012628).
- arch/arc: add copy_user_page() to <asm/page.h> to fix build
  error on ARC (bsc#1012628).
- misdn: dsp: select CONFIG_BITREVERSE (bsc#1012628).
- net: ethernet: fs_enet: Add missing MODULE_LICENSE
  (bsc#1012628).
- selftests: fix the return value for UDP GRO test (bsc#1012628).
- nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
  (bsc#1012628).
- nvme: avoid possible double fetch in handling CQE (bsc#1012628).
- nvmet-rdma: Fix list_del corruption on queue establishment
  failure (bsc#1012628).
- drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL
  pointer issue (bsc#1012628).
- drm/amdgpu: fix a GPU hang issue when remove device
  (bsc#1012628).
- drm/amd/pm: fix the failure when change power profile for renoir
  (bsc#1012628).
- drm/amdgpu: fix potential memory leak during navi12
  deinitialization (bsc#1012628).
- usb: typec: Fix copy paste error for NVIDIA alt-mode description
  (bsc#1012628).
- iommu/vt-d: Fix lockdep splat in sva bind()/unbind()
  (bsc#1012628).
- ACPI: scan: add stub acpi_create_platform_device() for
  !CONFIG_ACPI (bsc#1012628).
- drm/msm: Call msm_init_vram before binding the gpu
  (bsc#1012628).
- ARM: picoxcell: fix missing interrupt-parent properties
  (bsc#1012628).
- poll: fix performance regression due to out-of-line __put_user()
  (bsc#1012628).
- rcu-tasks: Move RCU-tasks initialization to before
  early_initcall() (bsc#1012628).
- bpf: Simplify task_file_seq_get_next() (bsc#1012628).
- bpf: Save correct stopping point in file seq iteration
  (bsc#1012628).
- x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling
  (bsc#1012628).
- cfg80211: select CONFIG_CRC32 (bsc#1012628).
- nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from
  interrupt context (bsc#1012628).
- iommu/vt-d: Update domain geometry in iommu_ops.at(de)tach_dev
  (bsc#1012628).
- net/mlx5e: CT: Use per flow counter when CT flow accounting
  is enabled (bsc#1012628).
- net/mlx5: Fix passing zero to 'PTR_ERR' (bsc#1012628).
- net/mlx5: E-Switch, fix changing vf VLANID (bsc#1012628).
- blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
  (bsc#1012628).
- mm: fix clear_refs_write locking (bsc#1012628).
- mm: don't play games with pinned pages in clear_page_refs
  (bsc#1012628).
- mm: don't put pinned pages into the swap cache (bsc#1012628).
- perf intel-pt: Fix 'CPU too large' error (bsc#1012628).
- dump_common_audit_data(): fix racy accesses to ->d_name
  (bsc#1012628).
- ASoC: meson: axg-tdm-interface: fix loopback (bsc#1012628).
- ASoC: meson: axg-tdmin: fix axg skew offset (bsc#1012628).
- ASoC: Intel: fix error code cnl_set_dsp_D0() (bsc#1012628).
- nvmet-rdma: Fix NULL deref when setting pi_enable and traddr
  INADDR_ANY (bsc#1012628).
- nvme: don't intialize hwmon for discovery controllers
  (bsc#1012628).
- nvme-tcp: fix possible data corruption with bio merges
  (bsc#1012628).
- nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT (bsc#1012628).
- NFS4: Fix use-after-free in trace_event_raw_event_nfs4_set_lock
  (bsc#1012628).
- pNFS: We want return-on-close to complete when evicting the
  inode (bsc#1012628).
- pNFS: Mark layout for return if return-on-close was not sent
  (bsc#1012628).
- pNFS: Stricter ordering of layoutget and layoutreturn
  (bsc#1012628).
- NFS: Adjust fs_context error logging (bsc#1012628).
- NFS/pNFS: Don't call pnfs_free_bucket_lseg() before removing
  the request (bsc#1012628).
- NFS/pNFS: Don't leak DS commits in pnfs_generic_retry_commit()
  (bsc#1012628).
- NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counter
  (bsc#1012628).
- NFS: nfs_delegation_find_inode_server must first reference
  the superblock (bsc#1012628).
- NFS: nfs_igrab_and_active must first reference the superblock
  (bsc#1012628).
- scsi: ufs: Fix possible power drain during system suspend
  (bsc#1012628).
- ext4: fix superblock checksum failure when setting password salt
  (bsc#1012628).
- RDMA/restrack: Don't treat as an error allocation ID wrapping
  (bsc#1012628).
- RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grp
  (bsc#1012628).
- bnxt_en: Improve stats context resource accounting with RDMA
  driver loaded (bsc#1012628).
- RDMA/mlx5: Fix wrong free of blue flame register on error
  (bsc#1012628).
- IB/mlx5: Fix error unwinding when set_has_smi_cap fails
  (bsc#1012628).
- umount(2): move the flag validity checks first (bsc#1012628).
- dm zoned: select CONFIG_CRC32 (bsc#1012628).
- drm/i915/dsi: Use unconditional msleep for the panel_on_delay
  when there is no reset-deassert MIPI-sequence (bsc#1012628).
- drm/i915/icl: Fix initing the DSI DSC power refcount during
  HW readout (bsc#1012628).
- drm/i915/gt: Restore clear-residual mitigations for Ivybridge,
  Baytrail (bsc#1012628).
- mm, slub: consider rest of partial list if acquire_slab()
  fails (bsc#1012628).
- riscv: Trace irq on only interrupt is enabled (bsc#1012628).
- iommu/vt-d: Fix unaligned addresses for
  intel_flush_svm_range_dev() (bsc#1012628).
- net: sunrpc: interpret the return value of kstrtou32 correctly
  (bsc#1012628).
- selftests: netfilter: Pass family parameter "-f" to conntrack
  tool (bsc#1012628).
- dm: eliminate potential source of excessive kernel log noise
  (bsc#1012628).
- ALSA: fireface: Fix integer overflow in transmit_midi_msg()
  (bsc#1012628).
- ALSA: firewire-tascam: Fix integer overflow in midi_port_work()
  (bsc#1012628).
- netfilter: conntrack: fix reading nf_conntrack_buckets
  (bsc#1012628).
- netfilter: nf_nat: Fix memleak in nf_nat_init (bsc#1012628).
- Update config files.
- commit b7732a5
- Linux 5.10.8 (bsc#1012628).
- powerpc/32s: Fix RTAS machine check with VMAP stack
  (bsc#1012628).
- io_uring: synchronise IOPOLL on task_submit fail (bsc#1012628).
- io_uring: limit {io|sq}poll submit locking scope (bsc#1012628).
- io_uring: patch up IOPOLL overflow_flush sync (bsc#1012628).
- iommu/arm-smmu-qcom: Initialize SCTLR of the bypass context
  (bsc#1012628).
- io_uring: Fix return value from alloc_fixed_file_ref_node
  (bsc#1012628).
- btrfs: skip unnecessary searches for xattrs when logging an
  inode (bsc#1012628).
- btrfs: fix deadlock when cloning inline extent and low on free
  metadata space (bsc#1012628).
- btrfs: shrink delalloc pages instead of full inodes
  (bsc#1012628).
- net: cdc_ncm: correct overhead in delayed_ndp_size
  (bsc#1012628).
- net: hns3: fix incorrect handling of sctp6 rss tuple
  (bsc#1012628).
- net: hns3: fix the number of queues actually used by ARQ
  (bsc#1012628).
- net: hns3: fix a phy loopback fail issue (bsc#1012628).
- net: stmmac: dwmac-sun8i: Fix probe error handling
  (bsc#1012628).
- net: stmmac: dwmac-sun8i: Balance internal PHY resource
  references (bsc#1012628).
- net: stmmac: dwmac-sun8i: Balance internal PHY power
  (bsc#1012628).
- net: stmmac: dwmac-sun8i: Balance syscon (de)initialization
  (bsc#1012628).
- net: vlan: avoid leaks on register_vlan_dev() failures
  (bsc#1012628).
- net/sonic: Fix some resource leaks in error handling paths
  (bsc#1012628).
- net: bareudp: add missing error handling for
  bareudp_link_config() (bsc#1012628).
- ptp: ptp_ines: prevent build when HAS_IOMEM is not set
  (bsc#1012628).
- net: ipv6: fib: flush exceptions when purging route
  (bsc#1012628).
- tools: selftests: add test for changing routes with PTMU
  exceptions (bsc#1012628).
- net: fix pmtu check in nopmtudisc mode (bsc#1012628).
- net: ip: always refragment ip defragmented packets
  (bsc#1012628).
- chtls: Fix hardware tid leak (bsc#1012628).
- chtls: Remove invalid set_tcb call (bsc#1012628).
- chtls: Fix panic when route to peer not configured
  (bsc#1012628).
- chtls: Avoid unnecessary freeing of oreq pointer (bsc#1012628).
- chtls: Replace skb_dequeue with skb_peek (bsc#1012628).
- chtls: Added a check to avoid NULL pointer dereference
  (bsc#1012628).
- chtls: Fix chtls resources release sequence (bsc#1012628).
- octeontx2-af: fix memory leak of lmac and lmac->name
  (bsc#1012628).
- nexthop: Fix off-by-one error in error path (bsc#1012628).
- nexthop: Unlink nexthop group entry in error path (bsc#1012628).
- nexthop: Bounce NHA_GATEWAY in FDB nexthop groups (bsc#1012628).
- s390/qeth: fix deadlock during recovery (bsc#1012628).
- s390/qeth: fix locking for discipline setup / removal
  (bsc#1012628).
- s390/qeth: fix L2 header access in qeth_l3_osa_features_check()
  (bsc#1012628).
- net: dsa: lantiq_gswip: Exclude RMII from modes that report
  1 GbE (bsc#1012628).
- net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address
  (bsc#1012628).
- net/mlx5e: ethtool, Fix restriction of autoneg with 56G
  (bsc#1012628).
- net/mlx5e: In skb build skip setting mark in switchdev mode
  (bsc#1012628).
- net/mlx5: Check if lag is supported before creating one
  (bsc#1012628).
- ionic: start queues before announcing link up (bsc#1012628).
- HID: wacom: Fix memory leakage caused by kfifo_alloc
  (bsc#1012628).
- fanotify: Fix sys_fanotify_mark() on native x86-32
  (bsc#1012628).
- ARM: OMAP2+: omap_device: fix idling of devices during probe
  (bsc#1012628).
- i2c: sprd: use a specific timeout to avoid system hang up issue
  (bsc#1012628).
- dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk()
  (bsc#1012628).
- selftests/bpf: Clarify build error if no vmlinux (bsc#1012628).
- can: tcan4x5x: fix bittiming const, use common bittiming from
  m_can driver (bsc#1012628).
- can: m_can: m_can_class_unregister(): remove erroneous
  m_can_clk_stop() (bsc#1012628).
- can: kvaser_pciefd: select CONFIG_CRC32 (bsc#1012628).
- spi: spi-geni-qcom: Fail new xfers if xfer/cancel/abort pending
  (bsc#1012628).
- cpufreq: powernow-k8: pass policy rather than use
  cpufreq_cpu_get() (bsc#1012628).
- spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in
  timeout case (bsc#1012628).
- spi: stm32: FIFO threshold level - fix align packet size
  (bsc#1012628).
- i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly
  terminated (bsc#1012628).
- i2c: mediatek: Fix apdma and i2c hand-shake timeout
  (bsc#1012628).
- bcache: set bcache device into read-only mode for
  BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET (bsc#1012628).
- interconnect: imx: Add a missing of_node_put after
  of_device_is_available (bsc#1012628).
- interconnect: qcom: fix rpmh link failures (bsc#1012628).
- dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the
  error handling path of the probe function (bsc#1012628).
- dmaengine: milbeaut-xdmac: Fix a resource leak in the error
  handling path of the probe function (bsc#1012628).
- dmaengine: xilinx_dma: check dma_async_device_register return
  value (bsc#1012628).
- dmaengine: xilinx_dma: fix incompatible param warning in
  _child_probe() (bsc#1012628).
- dmaengine: xilinx_dma: fix mixed_enum_type coverity warning
  (bsc#1012628).
- arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA
  (bsc#1012628).
- qed: select CONFIG_CRC32 (bsc#1012628).
- phy: dp83640: select CONFIG_CRC32 (bsc#1012628).
- wil6210: select CONFIG_CRC32 (bsc#1012628).
- block: rsxx: select CONFIG_CRC32 (bsc#1012628).
- lightnvm: select CONFIG_CRC32 (bsc#1012628).
- zonefs: select CONFIG_CRC32 (bsc#1012628).
- iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb()
  (bsc#1012628).
- iommu/intel: Fix memleak in intel_irq_remapping_alloc
  (bsc#1012628).
- bpftool: Fix compilation failure for net.o with older glibc
  (bsc#1012628).
- nvme-tcp: Fix possible race of io_work and direct send
  (bsc#1012628).
- net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups
  (bsc#1012628).
- net/mlx5e: Fix two double free cases (bsc#1012628).
- regmap: debugfs: Fix a memory leak when calling
  regmap_attach_dev (bsc#1012628).
- wan: ds26522: select CONFIG_BITREVERSE (bsc#1012628).
- arm64: cpufeature: remove non-exist CONFIG_KVM_ARM_HOST
  (bsc#1012628).
- regulator: qcom-rpmh-regulator: correct hfsmps515 definition
  (bsc#1012628).
- net: mvpp2: disable force link UP during port init procedure
  (bsc#1012628).
- drm/i915/dp: Track pm_qos per connector (bsc#1012628).
- net: mvneta: fix error message when MTU too large for XDP
  (bsc#1012628).
- selftests: fib_nexthops: Fix wrong mausezahn invocation
  (bsc#1012628).
- KVM: arm64: Don't access PMCR_EL0 when no PMU is available
  (bsc#1012628).
- xsk: Fix race in SKB mode transmit with shared cq (bsc#1012628).
- xsk: Rollback reservation at NETDEV_TX_BUSY (bsc#1012628).
- block/rnbd-clt: avoid module unload race with close confirmation
  (bsc#1012628).
- can: isotp: isotp_getname(): fix kernel information leak
  (bsc#1012628).
- block: fix use-after-free in disk_part_iter_next (bsc#1012628).
- net: drop bogus skb with CHECKSUM_PARTIAL and offset beyond
  end of trimmed packet (bsc#1012628).
- regmap: debugfs: Fix a reversed if statement in
  regmap_debugfs_init() (bsc#1012628).
- tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
  (bsc#1012628).
- Update config files.
- commit 8611168

==== kernel-source ====
Version update (5.10.7 -> 5.10.9)
Subpackages: kernel-default kernel-docs

- Linux 5.10.9 (bsc#1012628).
- btrfs: reloc: fix wrong file extent type check to avoid false
  ENOENT (bsc#1012628).
- btrfs: prevent NULL pointer dereference in extent_io_tree_panic
  (bsc#1012628).
- ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for
  HP machines (bsc#1012628).
- ALSA: doc: Fix reference to mixart.rst (bsc#1012628).
- ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad X395
  (bsc#1012628).
- ASoC: dapm: remove widget from dirty list on free (bsc#1012628).
- x86/hyperv: check cpu mask after interrupt has been disabled
  (bsc#1012628).
- drm/amdgpu: add green_sardine device id (v2) (bsc#1012628).
- drm/amdgpu: fix DRM_INFO flood if display core is not supported
  (bug 210921) (bsc#1012628).
- drm/amdgpu: add new device id for Renior (bsc#1012628).
- drm/i915: Allow the sysadmin to override security mitigations
  (bsc#1012628).
- drm/i915/gt: Limit VFE threads based on GT (bsc#1012628).
- drm/i915/backlight: fix CPU mode backlight takeover on LPT
  (bsc#1012628).
- drm/bridge: sii902x: Refactor init code into separate function
  (bsc#1012628).
- dt-bindings: display: sii902x: Add supply bindings
  (bsc#1012628).
- drm/bridge: sii902x: Enable I/O and core VCC supplies if present
  (bsc#1012628).
- tracing/kprobes: Do the notrace functions check without kprobes
  on ftrace (bsc#1012628).
- tools/bootconfig: Add tracing_on support to helper scripts
  (bsc#1012628).
- ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null
  when IS_ERR (bsc#1012628).
- ext4: fix wrong list_splice in ext4_fc_cleanup (bsc#1012628).
- ext4: fix bug for rename with RENAME_WHITEOUT (bsc#1012628).
- cifs: check pointer before freeing (bsc#1012628).
- cifs: fix interrupted close commands (bsc#1012628).
- riscv: Drop a duplicated PAGE_KERNEL_EXEC (bsc#1012628).
- riscv: return -ENOSYS for syscall -1 (bsc#1012628).
- riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL (bsc#1012628).
- riscv: Fix KASAN memory mapping (bsc#1012628).
- mips: fix Section mismatch in reference (bsc#1012628).
- mips: lib: uncached: fix non-standard usage of variable 'sp'
  (bsc#1012628).
- MIPS: boot: Fix unaligned access with
  CONFIG_MIPS_RAW_APPENDED_DTB (bsc#1012628).
- MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumps
  (bsc#1012628).
- MIPS: relocatable: fix possible boot hangup with KASLR enabled
  (bsc#1012628).
- RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd()
  (bsc#1012628).
- ACPI: scan: Harden acpi_device_add() against device ID overflows
  (bsc#1012628).
- xen/privcmd: allow fetching resource sizes (bsc#1012628).
- compiler.h: Raise minimum version of GCC to 5.1 for arm64
  (bsc#1012628).
- mm/vmalloc.c: fix potential memory leak (bsc#1012628).
- mm/hugetlb: fix potential missing huge page size info
  (bsc#1012628).
- mm/process_vm_access.c: include compat.h (bsc#1012628).
- dm raid: fix discard limits for raid1 (bsc#1012628).
- dm snapshot: flush merged data before committing metadata
  (bsc#1012628).
- dm integrity: fix flush with external metadata device
  (bsc#1012628).
- dm integrity: fix the maximum number of arguments (bsc#1012628).
- dm crypt: use GFP_ATOMIC when allocating crypto requests from
  softirq (bsc#1012628).
- dm crypt: do not wait for backlogged crypto request completion
  in softirq (bsc#1012628).
- dm crypt: do not call bio_endio() from the dm-crypt tasklet
  (bsc#1012628).
- dm crypt: defer decryption to a tasklet if interrupts disabled
  (bsc#1012628).
- stmmac: intel: change all EHL/TGL to auto detect phy addr
  (bsc#1012628).
- r8152: Add Lenovo Powered USB-C Travel Hub (bsc#1012628).
- btrfs: tree-checker: check if chunk item end overflows
  (bsc#1012628).
- ext4: don't leak old mountpoint samples (bsc#1012628).
- io_uring: don't take files/mm for a dead task (bsc#1012628).
- io_uring: drop mm and files after task_work_run (bsc#1012628).
- ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
  (bsc#1012628).
- ARC: build: add uImage.lzma to the top-level target
  (bsc#1012628).
- ARC: build: add boot_targets to PHONY (bsc#1012628).
- ARC: build: move symlink creation to arch/arc/Makefile to
  avoid race (bsc#1012628).
- ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent
  with defaults on xt875 (bsc#1012628).
- ath11k: fix crash caused by NULL rx_channel (bsc#1012628).
- netfilter: ipset: fixes possible oops in mtype_resize
  (bsc#1012628).
- ath11k: qmi: try to allocate a big block of DMA memory first
  (bsc#1012628).
- btrfs: fix async discard stall (bsc#1012628).
- btrfs: merge critical sections of discard lock in workfn
  (bsc#1012628).
- btrfs: fix transaction leak and crash after RO remount caused
  by qgroup rescan (bsc#1012628).
- regulator: bd718x7: Add enable times (bsc#1012628).
- ethernet: ucc_geth: fix definition and size of
  ucc_geth_tx_global_pram (bsc#1012628).
- ARM: dts: ux500/golden: Set display max brightness
  (bsc#1012628).
- habanalabs: adjust pci controller init to new firmware
  (bsc#1012628).
- habanalabs/gaudi: retry loading TPC f/w on -EINTR (bsc#1012628).
- habanalabs: register to pci shutdown callback (bsc#1012628).
- staging: spmi: hisi-spmi-controller: Fix some error handling
  paths (bsc#1012628).
- spi: altera: fix return value for altera_spi_txrx()
  (bsc#1012628).
- habanalabs: Fix memleak in hl_device_reset (bsc#1012628).
- hwmon: (pwm-fan) Ensure that calculation doesn't discard big
  period values (bsc#1012628).
- lib/raid6: Let $(UNROLL) rules work with macOS userland
  (bsc#1012628).
- kconfig: remove 'kvmconfig' and 'xenconfig' shorthands
  (bsc#1012628).
- spi: fix the divide by 0 error when calculating xfer waiting
  time (bsc#1012628).
- io_uring: drop file refs after task cancel (bsc#1012628).
- bfq: Fix computation of shallow depth (bsc#1012628).
- arch/arc: add copy_user_page() to <asm/page.h> to fix build
  error on ARC (bsc#1012628).
- misdn: dsp: select CONFIG_BITREVERSE (bsc#1012628).
- net: ethernet: fs_enet: Add missing MODULE_LICENSE
  (bsc#1012628).
- selftests: fix the return value for UDP GRO test (bsc#1012628).
- nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
  (bsc#1012628).
- nvme: avoid possible double fetch in handling CQE (bsc#1012628).
- nvmet-rdma: Fix list_del corruption on queue establishment
  failure (bsc#1012628).
- drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL
  pointer issue (bsc#1012628).
- drm/amdgpu: fix a GPU hang issue when remove device
  (bsc#1012628).
- drm/amd/pm: fix the failure when change power profile for renoir
  (bsc#1012628).
- drm/amdgpu: fix potential memory leak during navi12
  deinitialization (bsc#1012628).
- usb: typec: Fix copy paste error for NVIDIA alt-mode description
  (bsc#1012628).
- iommu/vt-d: Fix lockdep splat in sva bind()/unbind()
  (bsc#1012628).
- ACPI: scan: add stub acpi_create_platform_device() for
  !CONFIG_ACPI (bsc#1012628).
- drm/msm: Call msm_init_vram before binding the gpu
  (bsc#1012628).
- ARM: picoxcell: fix missing interrupt-parent properties
  (bsc#1012628).
- poll: fix performance regression due to out-of-line __put_user()
  (bsc#1012628).
- rcu-tasks: Move RCU-tasks initialization to before
  early_initcall() (bsc#1012628).
- bpf: Simplify task_file_seq_get_next() (bsc#1012628).
- bpf: Save correct stopping point in file seq iteration
  (bsc#1012628).
- x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling
  (bsc#1012628).
- cfg80211: select CONFIG_CRC32 (bsc#1012628).
- nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from
  interrupt context (bsc#1012628).
- iommu/vt-d: Update domain geometry in iommu_ops.at(de)tach_dev
  (bsc#1012628).
- net/mlx5e: CT: Use per flow counter when CT flow accounting
  is enabled (bsc#1012628).
- net/mlx5: Fix passing zero to 'PTR_ERR' (bsc#1012628).
- net/mlx5: E-Switch, fix changing vf VLANID (bsc#1012628).
- blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
  (bsc#1012628).
- mm: fix clear_refs_write locking (bsc#1012628).
- mm: don't play games with pinned pages in clear_page_refs
  (bsc#1012628).
- mm: don't put pinned pages into the swap cache (bsc#1012628).
- perf intel-pt: Fix 'CPU too large' error (bsc#1012628).
- dump_common_audit_data(): fix racy accesses to ->d_name
  (bsc#1012628).
- ASoC: meson: axg-tdm-interface: fix loopback (bsc#1012628).
- ASoC: meson: axg-tdmin: fix axg skew offset (bsc#1012628).
- ASoC: Intel: fix error code cnl_set_dsp_D0() (bsc#1012628).
- nvmet-rdma: Fix NULL deref when setting pi_enable and traddr
  INADDR_ANY (bsc#1012628).
- nvme: don't intialize hwmon for discovery controllers
  (bsc#1012628).
- nvme-tcp: fix possible data corruption with bio merges
  (bsc#1012628).
- nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT (bsc#1012628).
- NFS4: Fix use-after-free in trace_event_raw_event_nfs4_set_lock
  (bsc#1012628).
- pNFS: We want return-on-close to complete when evicting the
  inode (bsc#1012628).
- pNFS: Mark layout for return if return-on-close was not sent
  (bsc#1012628).
- pNFS: Stricter ordering of layoutget and layoutreturn
  (bsc#1012628).
- NFS: Adjust fs_context error logging (bsc#1012628).
- NFS/pNFS: Don't call pnfs_free_bucket_lseg() before removing
  the request (bsc#1012628).
- NFS/pNFS: Don't leak DS commits in pnfs_generic_retry_commit()
  (bsc#1012628).
- NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counter
  (bsc#1012628).
- NFS: nfs_delegation_find_inode_server must first reference
  the superblock (bsc#1012628).
- NFS: nfs_igrab_and_active must first reference the superblock
  (bsc#1012628).
- scsi: ufs: Fix possible power drain during system suspend
  (bsc#1012628).
- ext4: fix superblock checksum failure when setting password salt
  (bsc#1012628).
- RDMA/restrack: Don't treat as an error allocation ID wrapping
  (bsc#1012628).
- RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grp
  (bsc#1012628).
- bnxt_en: Improve stats context resource accounting with RDMA
  driver loaded (bsc#1012628).
- RDMA/mlx5: Fix wrong free of blue flame register on error
  (bsc#1012628).
- IB/mlx5: Fix error unwinding when set_has_smi_cap fails
  (bsc#1012628).
- umount(2): move the flag validity checks first (bsc#1012628).
- dm zoned: select CONFIG_CRC32 (bsc#1012628).
- drm/i915/dsi: Use unconditional msleep for the panel_on_delay
  when there is no reset-deassert MIPI-sequence (bsc#1012628).
- drm/i915/icl: Fix initing the DSI DSC power refcount during
  HW readout (bsc#1012628).
- drm/i915/gt: Restore clear-residual mitigations for Ivybridge,
  Baytrail (bsc#1012628).
- mm, slub: consider rest of partial list if acquire_slab()
  fails (bsc#1012628).
- riscv: Trace irq on only interrupt is enabled (bsc#1012628).
- iommu/vt-d: Fix unaligned addresses for
  intel_flush_svm_range_dev() (bsc#1012628).
- net: sunrpc: interpret the return value of kstrtou32 correctly
  (bsc#1012628).
- selftests: netfilter: Pass family parameter "-f" to conntrack
  tool (bsc#1012628).
- dm: eliminate potential source of excessive kernel log noise
  (bsc#1012628).
- ALSA: fireface: Fix integer overflow in transmit_midi_msg()
  (bsc#1012628).
- ALSA: firewire-tascam: Fix integer overflow in midi_port_work()
  (bsc#1012628).
- netfilter: conntrack: fix reading nf_conntrack_buckets
  (bsc#1012628).
- netfilter: nf_nat: Fix memleak in nf_nat_init (bsc#1012628).
- Update config files.
- commit b7732a5
- Linux 5.10.8 (bsc#1012628).
- powerpc/32s: Fix RTAS machine check with VMAP stack
  (bsc#1012628).
- io_uring: synchronise IOPOLL on task_submit fail (bsc#1012628).
- io_uring: limit {io|sq}poll submit locking scope (bsc#1012628).
- io_uring: patch up IOPOLL overflow_flush sync (bsc#1012628).
- iommu/arm-smmu-qcom: Initialize SCTLR of the bypass context
  (bsc#1012628).
- io_uring: Fix return value from alloc_fixed_file_ref_node
  (bsc#1012628).
- btrfs: skip unnecessary searches for xattrs when logging an
  inode (bsc#1012628).
- btrfs: fix deadlock when cloning inline extent and low on free
  metadata space (bsc#1012628).
- btrfs: shrink delalloc pages instead of full inodes
  (bsc#1012628).
- net: cdc_ncm: correct overhead in delayed_ndp_size
  (bsc#1012628).
- net: hns3: fix incorrect handling of sctp6 rss tuple
  (bsc#1012628).
- net: hns3: fix the number of queues actually used by ARQ
  (bsc#1012628).
- net: hns3: fix a phy loopback fail issue (bsc#1012628).
- net: stmmac: dwmac-sun8i: Fix probe error handling
  (bsc#1012628).
- net: stmmac: dwmac-sun8i: Balance internal PHY resource
  references (bsc#1012628).
- net: stmmac: dwmac-sun8i: Balance internal PHY power
  (bsc#1012628).
- net: stmmac: dwmac-sun8i: Balance syscon (de)initialization
  (bsc#1012628).
- net: vlan: avoid leaks on register_vlan_dev() failures
  (bsc#1012628).
- net/sonic: Fix some resource leaks in error handling paths
  (bsc#1012628).
- net: bareudp: add missing error handling for
  bareudp_link_config() (bsc#1012628).
- ptp: ptp_ines: prevent build when HAS_IOMEM is not set
  (bsc#1012628).
- net: ipv6: fib: flush exceptions when purging route
  (bsc#1012628).
- tools: selftests: add test for changing routes with PTMU
  exceptions (bsc#1012628).
- net: fix pmtu check in nopmtudisc mode (bsc#1012628).
- net: ip: always refragment ip defragmented packets
  (bsc#1012628).
- chtls: Fix hardware tid leak (bsc#1012628).
- chtls: Remove invalid set_tcb call (bsc#1012628).
- chtls: Fix panic when route to peer not configured
  (bsc#1012628).
- chtls: Avoid unnecessary freeing of oreq pointer (bsc#1012628).
- chtls: Replace skb_dequeue with skb_peek (bsc#1012628).
- chtls: Added a check to avoid NULL pointer dereference
  (bsc#1012628).
- chtls: Fix chtls resources release sequence (bsc#1012628).
- octeontx2-af: fix memory leak of lmac and lmac->name
  (bsc#1012628).
- nexthop: Fix off-by-one error in error path (bsc#1012628).
- nexthop: Unlink nexthop group entry in error path (bsc#1012628).
- nexthop: Bounce NHA_GATEWAY in FDB nexthop groups (bsc#1012628).
- s390/qeth: fix deadlock during recovery (bsc#1012628).
- s390/qeth: fix locking for discipline setup / removal
  (bsc#1012628).
- s390/qeth: fix L2 header access in qeth_l3_osa_features_check()
  (bsc#1012628).
- net: dsa: lantiq_gswip: Exclude RMII from modes that report
  1 GbE (bsc#1012628).
- net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address
  (bsc#1012628).
- net/mlx5e: ethtool, Fix restriction of autoneg with 56G
  (bsc#1012628).
- net/mlx5e: In skb build skip setting mark in switchdev mode
  (bsc#1012628).
- net/mlx5: Check if lag is supported before creating one
  (bsc#1012628).
- ionic: start queues before announcing link up (bsc#1012628).
- HID: wacom: Fix memory leakage caused by kfifo_alloc
  (bsc#1012628).
- fanotify: Fix sys_fanotify_mark() on native x86-32
  (bsc#1012628).
- ARM: OMAP2+: omap_device: fix idling of devices during probe
  (bsc#1012628).
- i2c: sprd: use a specific timeout to avoid system hang up issue
  (bsc#1012628).
- dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk()
  (bsc#1012628).
- selftests/bpf: Clarify build error if no vmlinux (bsc#1012628).
- can: tcan4x5x: fix bittiming const, use common bittiming from
  m_can driver (bsc#1012628).
- can: m_can: m_can_class_unregister(): remove erroneous
  m_can_clk_stop() (bsc#1012628).
- can: kvaser_pciefd: select CONFIG_CRC32 (bsc#1012628).
- spi: spi-geni-qcom: Fail new xfers if xfer/cancel/abort pending
  (bsc#1012628).
- cpufreq: powernow-k8: pass policy rather than use
  cpufreq_cpu_get() (bsc#1012628).
- spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in
  timeout case (bsc#1012628).
- spi: stm32: FIFO threshold level - fix align packet size
  (bsc#1012628).
- i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly
  terminated (bsc#1012628).
- i2c: mediatek: Fix apdma and i2c hand-shake timeout
  (bsc#1012628).
- bcache: set bcache device into read-only mode for
  BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET (bsc#1012628).
- interconnect: imx: Add a missing of_node_put after
  of_device_is_available (bsc#1012628).
- interconnect: qcom: fix rpmh link failures (bsc#1012628).
- dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the
  error handling path of the probe function (bsc#1012628).
- dmaengine: milbeaut-xdmac: Fix a resource leak in the error
  handling path of the probe function (bsc#1012628).
- dmaengine: xilinx_dma: check dma_async_device_register return
  value (bsc#1012628).
- dmaengine: xilinx_dma: fix incompatible param warning in
  _child_probe() (bsc#1012628).
- dmaengine: xilinx_dma: fix mixed_enum_type coverity warning
  (bsc#1012628).
- arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA
  (bsc#1012628).
- qed: select CONFIG_CRC32 (bsc#1012628).
- phy: dp83640: select CONFIG_CRC32 (bsc#1012628).
- wil6210: select CONFIG_CRC32 (bsc#1012628).
- block: rsxx: select CONFIG_CRC32 (bsc#1012628).
- lightnvm: select CONFIG_CRC32 (bsc#1012628).
- zonefs: select CONFIG_CRC32 (bsc#1012628).
- iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb()
  (bsc#1012628).
- iommu/intel: Fix memleak in intel_irq_remapping_alloc
  (bsc#1012628).
- bpftool: Fix compilation failure for net.o with older glibc
  (bsc#1012628).
- nvme-tcp: Fix possible race of io_work and direct send
  (bsc#1012628).
- net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups
  (bsc#1012628).
- net/mlx5e: Fix two double free cases (bsc#1012628).
- regmap: debugfs: Fix a memory leak when calling
  regmap_attach_dev (bsc#1012628).
- wan: ds26522: select CONFIG_BITREVERSE (bsc#1012628).
- arm64: cpufeature: remove non-exist CONFIG_KVM_ARM_HOST
  (bsc#1012628).
- regulator: qcom-rpmh-regulator: correct hfsmps515 definition
  (bsc#1012628).
- net: mvpp2: disable force link UP during port init procedure
  (bsc#1012628).
- drm/i915/dp: Track pm_qos per connector (bsc#1012628).
- net: mvneta: fix error message when MTU too large for XDP
  (bsc#1012628).
- selftests: fib_nexthops: Fix wrong mausezahn invocation
  (bsc#1012628).
- KVM: arm64: Don't access PMCR_EL0 when no PMU is available
  (bsc#1012628).
- xsk: Fix race in SKB mode transmit with shared cq (bsc#1012628).
- xsk: Rollback reservation at NETDEV_TX_BUSY (bsc#1012628).
- block/rnbd-clt: avoid module unload race with close confirmation
  (bsc#1012628).
- can: isotp: isotp_getname(): fix kernel information leak
  (bsc#1012628).
- block: fix use-after-free in disk_part_iter_next (bsc#1012628).
- net: drop bogus skb with CHECKSUM_PARTIAL and offset beyond
  end of trimmed packet (bsc#1012628).
- regmap: debugfs: Fix a reversed if statement in
  regmap_debugfs_init() (bsc#1012628).
- tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
  (bsc#1012628).
- Update config files.
- commit 8611168

==== kreversi ====
Subpackages: kreversi-lang

- Add compatibility with qml-autoreqprov

==== libblockdev ====
Version update (2.24 -> 2.25)
Subpackages: libbd_btrfs2 libbd_crypto2 libbd_fs2 libbd_loop2 libbd_mdraid2 libbd_part2 libbd_swap2 libbd_utils2 libblockdev2

- update to 2.25:
  * exec: Fix polling for stdout and stderr
  * exec: Use non-blocking read and process the buffer manually
  * exec: Clarify the BDUtilsProgExtract callback documentation
  * tests: Add bufferbloat exec tests
  * tests: Add null-byte exec tests
  * lvm: Fix bd_lvm_vdopooldata_* symbols
  * exec: Fix setting locale for util calls
  * fs: Do not report error when errors were fixed by e2fsck
  * README: Use CI status image for 2.x-branch on 2.x
  * fs: Fix compile error in ext_repair caused by cherry pick from master
  * Mark all GIR file constants as guint64
  * lvm: Set thin metadata limits to match limits LVM uses in lvcreate
  * lvm: Do not use thin_metadata_size to recommend thin metadata size
  * lvm: Use the UNUSED macro instead of __attribute__((unused))
  * Fix max size limit for LVM thinpool metadata
  * loop: Retry LOOP_SET_STATUS64 on EAGAIN

==== libcap ====
Version update (2.43 -> 2.46)

- update to 2.46:
  * The bulk of this release concerns fixes and improvements to libpsx
  * Fix the capsh == argument handling and add a test case
  * Added build support for systems that do not support libpthread
  * Added build support for not building shared libraries
- update to 2.44:
  Generally, this is a release to help package builders: no functional change
  to any of the generated code just documentation and make related fixes.

==== libcontainers-common ====
Version update (20200727 -> 20210112)

- Update common to 0.33.0
- Update image to 5.9.0
- Update podman to 2.2.1
- Update storage to 1.24.5
- Switch to seccomp profile provided by common instead of podman
- Update containers.conf to match latest version

==== libkdegames ====
Subpackages: kdegames-carddecks-default libkdegames-lang libkf5kdegames6

- Add patch to make qmldir compatible with qml-autoreprov:
  * 0001-Add-missing-module-identifier-to-qmldir.patch

==== libmwaw ====
Version update (0.3.16 -> 0.3.17)

- update to 0.3.17:
  - add a parser for Jazz(Lotus) writer and spreasheet files
    + the writer parser can only be called if the file still
    contains its resource fork
  - add a parser for Canvas 3 and 3.5 files
  - AppleWorks parser: try to retrieve more Windows presentation
  - add a parser for Drawing Table files
  - add a parser for Canvas 2 files
  - configure.ac: add an enable-asan option
  - API: add new reserved enums in MWAWDocument.hxx
    MWAW_T_RESERVED10..MWAW_T_RESERVED29
    and add a new define in libmwaw.hxx
    MWAW_INTERFACE_VERSION
    to check if these enums are defined

==== libnftnl ====
Version update (1.1.8 -> 1.1.9)

- Update to release 1.1.9
  * Improve formatting of registers in bitwise dumps.

==== libodfgen ====
Version update (0.1.7 -> 0.1.8)

- update to 0.1.8:
    + use libxml2 to parse xml's equations...
    + code modernization:
    use range-based for loop, use nullptr,
    fix too small loop variables,
    don't access static members through instance,
    + retrieve more border's attributes in tables,
    + retrieve draw:auto-grow-width,draw:fit-to-size,draw:z-index,
    style:print-content, style:shrink-to-fit attributes in graphics
    + output numbers with more precision,
- Other improvements and fixes.

==== libpt2 ====

- Add ptlib-2.10.11-signed_int_overflow.patch: fix integer overflow
  (rh#1696458).

==== libqt5-qtbase ====
Subpackages: libQt5Concurrent5 libQt5Core5 libQt5DBus5 libQt5Gui5 libQt5Network5 libQt5OpenGL5 libQt5PrintSupport5 libQt5Sql5 libQt5Sql5-mysql libQt5Sql5-sqlite libQt5Test5 libQt5Widgets5 libQt5Xml5 libqt5-qtbase-platformtheme-gtk3

- Add patch to fix infinite loop in KWin on XServer exit:
  * 0001-Let-QXcbConnection-getTimestamp-properly-exit-when-X.patch
- Spec file cleanup, remove conditionals for Leap 42.x

==== libstorage-ng ====
Version update (4.3.80 -> 4.3.85)
Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1

- merge gh#openSUSE/libstorage-ng#795
- per default join all action messages for compound actions
- 4.3.85
- merge gh#openSUSE/libstorage-ng#794
- updated pot and po files
- 4.3.84
- merge gh#openSUSE/libstorage-ng#793
- make the btrfs subvolume the target device for qgroup compound
  actions
- 4.3.83
- merge gh#openSUSE/libstorage-ng#792
- updated pot and po files
- 4.3.82
- merge gh#openSUSE/libstorage-ng#791
- handle tmpfs in compound actions
- 4.3.81

==== libusb-1_0 ====

- Add 0001-fix-descriptor-parsing.patch to fix detection of some devices.

==== libvdpau ====

- add c5a8e7c6c8b4b36a0e4c9a4369404519262a3256.patch
  e82dc4bdbb0db3ffa8c78275902738eb63aa5ca8.patch: upstream
  patches to include tracing info for VP9 and HEVC

==== libvirt ====
Version update (6.10.0 -> 7.0.0)
Subpackages: libvirt-bash-completion libvirt-client libvirt-daemon libvirt-daemon-driver-interface libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-iscsi-direct libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-lxc libvirt-daemon-qemu libvirt-libs

- Update to libvirt 7.0.0
  - jsc#SLE-15860
  - Many incremental improvements and bug fixes, see
    https://libvirt.org/news.html
  - Dropped patches:
    0d05d51b-apparmor-lxc-fix.patch,
    cf4e7e62-lxc-def-secmodel.patch,
    0ddebdb4-qemu-snapshot-deletion.patch

==== libxkbcommon ====
Subpackages: libxkbcommon-x11-0 libxkbcommon0

- Fix dependency of libxkbregistry-devel: the devel package must
  require the library libxkbregistry0.

==== lzip ====
Version update (1.21 -> 1.22)

- update to 1.22:
  * Lzip now reports an error if a file name is empty (lzip -t "").
  * Option '-o, --output' now behaves like '-c, --stdout', but
    sending the output unconditionally to a file instead of to
    standard output.
  * Lzip now does not even open the output file if the input file
    is a terminal.
  * Lzip can now be built, tested, and installed on systems
    lacking a 'make' program. (Feature suggested by Mohammad
    Akhlaghi).
  * The words 'decompressed' and 'compressed' have been replaced
    with the shorter 'out' and 'in' in the verbose output when
    decompressing or testing.
  * Option '--list' now reports corruption or truncation of the
    last header in a multimenber file specifically instead of
    showing the generic message "Last member in input file is
    truncated or corrupt."
  * The commands needed to extract files from a tar.lz archive
    have been documented in the manual, in the output of '--help',
    and in the man page.
  * Plzip and tarlz are mentioned in the manual as alternatives for
    multiprocessors.
  * Several fixes and improvements have been made to the manual.

==== miniupnpc ====
Version update (2.1 -> 2.2.1)

- update to 2.2.1:
  * Add miniupnpc.rc for .dll description
  * Check properly for reserved IP addresses
  * prevent infinite loop in upnpDiscover()
  * Add Haiku support
  * testminiwget.sh can use either "ip addr" or "ifconfig -a
  * fix UPNP_GetValidIGD() when several devices are found
  * Allow Remote Host on upnpc command line
  * fix error 708 description in strupnperror()
  * Fix memory leak in upnpreplyparse.c with NewPortListing element
  * connecthostport.c: Code simplification, error trace fix
  * set timeout for select() in connecthostport()
  * miniupnpcmodule.c: check return of WSAStartup()

==== mtr ====
Version update (0.92 -> 0.94)

- update to 0.94:
  * loads of fixes,
  see https://raw.githubusercontent.com/traviscross/mtr/v0.94/NEWS
- build against GTK 3
- use secure download path
- mtr-0.75-manmtr.patch, mtr-0.87-manxmtr.patch: refreshed to apply
  again

==== mutter ====
Version update (3.38.2 -> 3.38.3)
Subpackages: libmutter-7-0 mutter-data

- Update to version 3.38.3:
  + xwayland: Set xrandr primary output,
  + Disable CRTCs if there is no monitor,
  + Fixed crashes,
  + Misc. bug fixes,
  + Updated translations.

==== nano ====
Version update (5.4 -> 5.5)

- GNU nano 5.5:
  * Option 'set minibar' to suppress the title bar and show a bar
    with basic information
  * 'set promptcolor' can configure the prompt bar
  * 'set markmatch' highlights the result of a successful search
  * AThe bindable toggle 'nowrap' has been renamed to
    'breaklonglines'
  * Support for Slang has been removed

==== ncurses ====
Version update (6.2.20201205 -> 6.2.20210109)
Subpackages: libncurses6 ncurses-utils terminfo terminfo-base terminfo-iterm terminfo-screen

- Add ncurses patch 20210109
  + fix errata in man/ncurses.3x from recent updates.
  + improve quoting/escaping in configure script, uses some features of
    autoconf 2.52.20210105
- Add ncurses patch 20210102
  + update man/curs_memleaks.3x, to include <term.h> which declares
    exit_terminfo.
  + clarify man/curs_terminfo.3x, to mention why the macro setterm is
    defined in <curses.h>, and remove it from the list of prototypes
    (prompted by patch by Graeme McCutcheon).
  + amend man/curs_terminfo.3x, to note that <curses.h> is required
    for certain functions, e.g., those using chtype or attr_t for
    types, as well as mvcur (cf: 20201031).
  + use parameter-names in prototypes in curs_sp_funcs.3x, for
    consistency with other manpages.
- Add ncurses patch 20201227
  + update terminology entry to 1.8.1 -TD
  + fix some compiler-warnings which gcc8 reports incorrectly.
- Add ncurses patch 20201219
  + suppress hyphenation in generated html for manpages, to address
    regression in upgrade of groff 1.22.2 to 1.22.3.
  + fix inconsistent sort-order in see-also sections of manpages (report
    by Chris Bennett).
- Port patch ncurses-6.2.dif
- Add ncurses patch 20201212
  + improve manual pages for form field-types.

==== nftables ====
Version update (0.9.7 -> 0.9.8)
Subpackages: libnftables1 python3-nftables

- Update to release 0.9.8
  * Complete support for matching ICMP header content fields.
  * Added raw tcp option match support.
  * Added ability to check for the presence of any tcp option.
  * Support for rejecting traffic from the ingress chain.

==== openal-soft ====
Version update (1.20.1 -> 1.21.0)
Subpackages: libopenal1 openal-soft-data

- new version 1.21.0
  * Updated library codebase to C++14.
  * Implemented the AL_SOFT_effect_target extension.
  * Implemented the AL_SOFT_events extension.
  * Implemented the ALC_SOFT_loopback_bformat extension.
  * Improved memory use for mixing voices.
  * Improved detection of NEON capabilities.
  * Improved handling of PulseAudio devices that lack manual start control.
  * Improved mixing performance with PulseAudio.
  * Improved high-frequency scaling quality for the HRTF B-Format decoder.
  * Improved makemhr's HRIR delay calculation.
  * Improved WASAPI capture of mono formats with multichannel input.
  * Reimplemented the modulation stage for reverb.
  * Enabled real-time mixing priority by default, for backends that use the setting. It can still be disabled in the config file.
  * Enabled dual-band processing for the built-in quad and 7.1 output decoders.
  * Fixed a potential crash when deleting an effect slot immediately after the last source using it stops.
  * Fixed building with the static runtime on MSVC.
  * Fixed using source stereo angles outside of -pi...+pi.
  * Fixed the buffer processed event count for sources that start with empty buffers.
  * Fixed trying to open an unopenable WASAPI device causing all devices to stop working.
  * Fixed stale devices when re-enumerating WASAPI devices.
  * Fixed using unicode paths with the log file on Windows.
  * Fixed DirectSound capture reporting bad sample counts or erroring when reading samples.
  * Added an in-progress extension for a callback-driven buffer type.
  * Added an in-progress extension for higher-order B-Format buffers.
  * Added an in-progress extension for convolution reverb.
  * Added an experimental Oboe backend for Android playback. This requires the Oboe sources at build time, so that it's built as a static library included in libopenal.
  * Added an option for auto-connecting JACK ports.
  * Added greater-than-stereo support to the SoundIO backend.
  * Modified the mixer to be fully asynchronous with the external API, and should now be real-time safe. Although alcRenderSamplesSOFT is not due to locking to check the device handle validity.
  * Modified the UHJ encoder to use an all-pass FIR filter that's less harmful to non-filtered signal phase.
  * Converted examples from SDL_sound to libsndfile. To avoid issues when combining SDL2 and SDL_sound.
  * Worked around a 32-bit GCC/MinGW bug with TLS destructors. See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83562
  * Reduced the maximum number of source sends from 16 to 6.
  * Removed the QSA backend. It's been broken for who knows how long.
  * Got rid of the compile-time native-tools targets, using cmake and global initialization instead. This should make cross-compiling less troublesome.

==== openconnect ====
Subpackages: libopenconnect5 openconnect-bash-completion

- Build with --without-gnutls-version-check

==== openldap2 ====
Version update (2.4.56 -> 2.4.57)
Subpackages: libldap-2_4-2 libldap-data openldap2-client

- updated to 2.4.57
  OpenLDAP 2.4.57 Release (2021/01/18)
  Fixed ldapexop to use correct return code (ITS#9417)
  Fixed slapd to remove asserts in UUIDNormalize (ITS#9391)
  Fixed slapd to remove assert in csnValidate (ITS#9410)
  Fixed slapd validity checks for issuerAndThisUpdateCheck (ITS#9411, ITS#9427)
  Fixed slapd validity checks for serialNumberAndIssuerCheck (ITS#9404, ITS#9424)
  Fixed slapd AVA sort with invalid RDN (ITS#9412)
  Fixed slapd ldap_X509dn2bv to check for invalid BER after RDN count (ITS#9423, ITS#9425)
  Fixed slapd saslauthz to remove asserts in validation (ITS#9406, ITS#9407)
  Fixed slapd saslauthz to use slap_sl_free on normalized DN (ITS#9409)
  Fixed slapd saslauthz SEGV in slap_parse_user (ITS#9413)
  Fixed slapd modrdn memory leak (ITS#9420)
  Fixed slapd double-free in vrfilter (ITS#9408)
  Fixed slapd cancel operation to correctly terminate (ITS#9428)
  Fixed slapd-ldap fix binds on retry with closed connection (ITS#9400)
  Fixed slapo-syncprov to ignore duplicate sessionlog entries (ITS#9394)

==== openssh ====
Version update (8.3p1 -> 8.4p1)
Subpackages: openssh-clients openssh-common openssh-server

- update to 8.4p1:
  Security
  ========
  * ssh-agent(1): restrict ssh-agent from signing web challenges for
  FIDO/U2F keys.
  * ssh-keygen(1): Enable FIDO 2.1 credProtect extension when generating
  a FIDO resident key.
  * ssh(1), ssh-keygen(1): support for FIDO keys that require a PIN for
  each use. These keys may be generated using ssh-keygen using a new
  "verify-required" option. When a PIN-required key is used, the user
  will be prompted for a PIN to complete the signature operation.
  New Features
  - -----------
  * sshd(8): authorized_keys now supports a new "verify-required"
  option to require FIDO signatures assert that the token verified
  that the user was present before making the signature. The FIDO
  protocol supports multiple methods for user-verification, but
  currently OpenSSH only supports PIN verification.
  * sshd(8), ssh-keygen(1): add support for verifying FIDO webauthn
  signatures. Webauthn is a standard for using FIDO keys in web
  browsers. These signatures are a slightly different format to plain
  FIDO signatures and thus require explicit support.
  * ssh(1): allow some keywords to expand shell-style ${ENV}
  environment variables. The supported keywords are CertificateFile,
  ControlPath, IdentityAgent and IdentityFile, plus LocalForward and
  RemoteForward when used for Unix domain socket paths. bz#3140
  * ssh(1), ssh-agent(1): allow some additional control over the use of
  ssh-askpass via a new $SSH_ASKPASS_REQUIRE environment variable,
  including forcibly enabling and disabling its use. bz#69
  * ssh(1): allow ssh_config(5)'s AddKeysToAgent keyword accept a time
  limit for keys in addition to its current flag options. Time-
  limited keys will automatically be removed from ssh-agent after
  their expiry time has passed.
  * scp(1), sftp(1): allow the -A flag to explicitly enable agent
  forwarding in scp and sftp. The default remains to not forward an
  agent, even when ssh_config enables it.
  * ssh(1): add a '%k' TOKEN that expands to the effective HostKey of
  the destination. This allows, e.g., keeping host keys in individual
  files using "UserKnownHostsFile ~/.ssh/known_hosts.d/%k". bz#1654
  * ssh(1): add %-TOKEN, environment variable and tilde expansion to
  the UserKnownHostsFile directive, allowing the path to be
  completed by the configuration (e.g. bz#1654)
  * ssh-keygen(1): allow "ssh-add -d -" to read keys to be deleted
  from stdin. bz#3180
  * sshd(8): improve logging for MaxStartups connection throttling.
  sshd will now log when it starts and stops throttling and periodically
  while in this state. bz#3055
  Bugfixes
  - -------
  * ssh(1), ssh-keygen(1): better support for multiple attached FIDO
  tokens. In cases where OpenSSH cannot unambiguously determine which
  token to direct a request to, the user is now required to select a
  token by touching it. In cases of operations that require a PIN to
  be verified, this avoids sending the wrong PIN to the wrong token
  and incrementing the token's PIN failure counter (tokens
  effectively erase their keys after too many PIN failures).
  * sshd(8): fix Include before Match in sshd_config; bz#3122
  * ssh(1): close stdin/out/error when forking after authentication
  completes ("ssh -f ...") bz#3137
  * ssh(1), sshd(8): limit the amount of channel input data buffered,
  avoiding peers that advertise large windows but are slow to read
  from causing high memory consumption.
  * ssh-agent(1): handle multiple requests sent in a single write() to
  the agent.
  * sshd(8): allow sshd_config longer than 256k
  * sshd(8): avoid spurious "Unable to load host key" message when sshd
  load a private key but no public counterpart
  * ssh(1): prefer the default hostkey algorithm list whenever we have
  a hostkey that matches its best-preference algorithm.
  * sshd(1): when ordering the hostkey algorithms to request from a
  server, prefer certificate types if the known_hosts files contain a key
  marked as a @cert-authority; bz#3157
  * ssh(1): perform host key fingerprint comparisons for the "Are you
  sure you want to continue connecting (yes/no/[fingerprint])?"
  prompt with case sensitivity.
  * sshd(8): ensure that address/masklen mismatches in sshd_config
  yield fatal errors at daemon start time rather than later when
  they are evaluated.
  * ssh-keygen(1): ensure that certificate extensions are lexically
  sorted. Previously if the user specified a custom extension then
  the everything would be in order except the custom ones. bz#3198
  * ssh(1): also compare username when checking for JumpHost loops.
  bz#3057
  * ssh-keygen(1): preserve group/world read permission on known_hosts
  files across runs of "ssh-keygen -Rf /path". The old behaviour was
  to remove all rights for group/other. bz#3146
  * ssh-keygen(1): Mention the [-a rounds] flag in the ssh-keygen
  manual page and usage().
  * sshd(8): explicitly construct path to ~/.ssh/rc rather than
  relying on it being relative to the current directory, so that it
  can still be found if the shell startup changes its directory.
  bz#3185
  * sshd(8): when redirecting sshd's log output to a file, undo this
  redirection after the session child process is forked(). Fixes
  missing log messages when using this feature under some
  circumstances.
  * sshd(8): start ClientAliveInterval bookkeeping before first pass
  through select() loop; fixed theoretical case where busy sshd may
  ignore timeouts from client.
  * ssh(1): only reset the ServerAliveInterval check when we receive
  traffic from the server and ignore traffic from a port forwarding
  client, preventing a client from keeping a connection alive when
  it should be terminated. bz#2265
  * ssh-keygen(1): avoid spurious error message when ssh-keygen
  creates files outside ~/.ssh
  * sftp-client(1): fix off-by-one error that caused sftp downloads to
  make one more concurrent request that desired. This prevented using
  sftp(1) in unpipelined request/response mode, which is useful when
  debugging. bz#3054
  * ssh(1), sshd(8): handle EINTR in waitfd() and timeout_connect()
  helpers. bz#3071
  * ssh(1), ssh-keygen(1): defer creation of ~/.ssh until we attempt to
  write to it so we don't leave an empty .ssh directory when it's not
  needed. bz#3156
  * ssh(1), sshd(8): fix multiplier when parsing time specifications
  when handling seconds after other units. bz#3171

==== orc ====
Version update (0.4.31 -> 0.4.32)

- Update to version 0.4.32:
  + Add support for JIT code generation in Universal Windows
    Platform apps.
  + Minor Meson build system fixes and improvements.

==== osinfo-db ====
Version update (20201015 -> 20201218)

- Update database to version 20201218
  osinfo-db-20201218.tar.xz

==== ovmf ====
Subpackages: qemu-ovmf-x86_64 qemu-uefi-aarch64

- Add ovmf-bsc1180079-amd-sev-es-mitigation.patch to mitigate the
  potential AMD SEV-ES security issues (bsc#1180079)
- Add the json descriptor for xen-hvm (bsc#1180050)

==== patterns-gnome ====
Subpackages: patterns-gnome-gnome patterns-gnome-gnome_basic patterns-gnome-gnome_basis patterns-gnome-gnome_basis_opt patterns-gnome-gnome_games patterns-gnome-gnome_ide patterns-gnome-gnome_imaging patterns-gnome-gnome_internet patterns-gnome-gnome_multimedia patterns-gnome-gnome_office patterns-gnome-gnome_utilities patterns-gnome-gnome_x11 patterns-gnome-gnome_yast patterns-gnome-sw_management_gnome

- Downgrade requires to recommends for vinagre/remmina.
- Add recommends for gnome-remote-desktop for GNOME default
  pattern.

==== perl-Mojolicious ====
Version update (8.70 -> 8.71)

- updated to 8.71
  see /usr/share/doc/packages/perl-Mojolicious/Changes
  8.71  2021-01-17
  - Added EXPERIMENTAL freeze option to reset method in Mojo::IOLoop.
  - Improved Mojo::IOLoop::Subprocess not to close connections after fork.

==== perl-Net-DNS ====
Version update (1.28 -> 1.29)

- update to 1.29
  Include test number in summary of failed non-fatal tests.
  Remove Net::DNS::SEC specific tests.
  Fix faulty test plan in t/08-recurse.t.

==== perl-URI ====
Version update (5.05 -> 5.06)

- updated to 5.06
  see /usr/share/doc/packages/perl-URI/Changes
  5.06      2021-01-14 16:01:13Z
  - Tidy import statements (GH#80) (Olaf Alders)

==== plasma5-disks ====

- Add compatibility with qml-autoreqprov

==== plasma5-thunderbolt ====

- Add compatibility with qml-autoreqprov

==== plasma5-workspace ====
Subpackages: gmenudbusmenuproxy plasma5-session plasma5-session-wayland plasma5-workspace-lang plasma5-workspace-libs xembedsniproxy

- Add _constraints with min 4GB disk space to avoid build failure

==== poppler ====
Version update (20.12.1 -> 21.01.0)
Subpackages: libpoppler-cpp0 libpoppler-glib8 poppler-tools

- Update to 21.01.0:
  + core:
  - Faster routines for jpeg decoding
  - Fix reading signatures in encrypted files
  - Add white point correction when lcms is used
  - JBIG2Stream: Fix byte counting
  - Fix potential data loss if we try to fetch a non existing Ref after modifying the document
  - Specifically use DeviceGray instead of DefaultGray for softmasks
  - Fix various issues handling broken files
  + utils:
  - pdftocairo: Setmode binary for windows
  - pdfsig: Add hability to digitally sign files
  - pdftoppm: add options to set DeviceGray/DeviceRGB/DeviceCMYK
  - pdftops: add options to set DeviceGray/DeviceRGB/DeviceCMYK
  - pdfimages: Account for rotation in PPI calculation
  + qt5 and qt6:
  - Add hability to digitally sign files

==== poppler-qt5 ====
Version update (20.12.1 -> 21.01.0)

- Update to 21.01.0:
  + core:
  - Faster routines for jpeg decoding
  - Fix reading signatures in encrypted files
  - Add white point correction when lcms is used
  - JBIG2Stream: Fix byte counting
  - Fix potential data loss if we try to fetch a non existing Ref after modifying the document
  - Specifically use DeviceGray instead of DefaultGray for softmasks
  - Fix various issues handling broken files
  + utils:
  - pdftocairo: Setmode binary for windows
  - pdfsig: Add hability to digitally sign files
  - pdftoppm: add options to set DeviceGray/DeviceRGB/DeviceCMYK
  - pdftops: add options to set DeviceGray/DeviceRGB/DeviceCMYK
  - pdfimages: Account for rotation in PPI calculation
  + qt5 and qt6:
  - Add hability to digitally sign files

==== ppp ====

- Refresh spec-file via spec-cleaner and manual optimizations.
  * Removed obsolete constructs (creating dialout group via shadow).

==== publicsuffix ====
Version update (20201223 -> 20210108)

- Update to version 20210108:
  * Added ghost.io to PSL (#1180)
  * Add myshopify.com (#1179)

==== pulseaudio ====
Subpackages: libpulse-mainloop-glib0 libpulse0 pulseaudio-bash-completion pulseaudio-gdm-hooks pulseaudio-module-bluetooth pulseaudio-module-gsettings pulseaudio-module-x11 pulseaudio-module-zeroconf pulseaudio-utils pulseaudio-zsh-completion

- Drop the outdated module-rescue-stream from gdm default config
  (bsc#1180869)

==== purple-rocketchat ====
Version update (0.0+git20201219 -> 0.0+git20210119)
Subpackages: libpurple-plugin-rocketchat pidgin-plugin-rocketchat

- Update to version 0.0+git20210219 (changes since 0.0+git20201219
  * Fix an occasional crash when empty messages are sent by the server
    (boo#1180806) again

==== python-M2Crypto ====

- Dr. Strangelove or: How I Learned to Stop Worrying and Love pytest

==== python-SQLAlchemy ====

- Skip one failing test on Python 3.6

==== python-gst ====
Version update (1.18.2 -> 1.18.3)

- Update to version 1.18.3:
  + No changes

==== python-libvirt-python ====
Version update (6.10.0 -> 7.0.0)

- Update to 7.0.0
  - Add all new APIs and constants in libvirt 7.0.0
  - jsc#SLE-15860

==== python-matplotlib ====
Version update (3.3.0 -> 3.3.3)
Subpackages: python38-matplotlib python38-matplotlib-cairo python38-matplotlib-gtk3

- Update to v3.3.3
  This release contains several critical bug-fixes:
  * Fix calls to Axis.grid with argument visible=True.
  * Fix fully masked imshow.
  * Fix inconsistent color mapping in scatter for 3D plots.
  * Fix notebook/nbAgg figures when used with ipywidgets in the
    same cell.
  * Fix notebook/nbAgg/WebAgg on older (e.g., Firefox ESR)
    browsers.
  * Fix pcolormesh with datetime coordinates.
  * Fix performance regression with datetimes.
  * Fix singular ticks with small log ranges.
  * Fix timers/animations on wx and notebook backends.
  * Remove certifi as a hard runtime dependency.
- Changelog for v3.3.2
  This release contains several critical bug-fixes:
  * fix Axis scale on twinned Axes
  * fix auto-close of Figures in nbagg
  * fix automatic title placement if Axes is off the Figure
  * fix autoranging of log scales with barstacked histogram
  * fix extra redraws when using Button or TextBox widgets
  * fix imshow with LogNorm and large vmin/vmax ranges
  * fix plotting Pandas DataFrame with string MultiIndex
  * fix scatter with marker=''
  * fix scatter3d color/linewidth re-projection
  * fix state of mode buttons in TkAgg backends
  * include license files in built distribution
  * reduce Visual C++ runtime requirements on Windows
- Changelog for v3.3.1
  This release contains several critical bug-fixes:
  * fix docstring import issues when running Python with optimization
  * fix hist with categorical data, such as with Pandas
  * fix install on BSD systems
  * fix nbagg compatibility with Chrome 84+
  * fix ordering of scatter marker size in 3D plots
  * fix performance regression when plotting Paths
  * fix reading from URL in imread
  * fix several regressions with new date epoch handling
  * fix some bad constrained and tight layout interactions with colorbars
  * fix use of customized toolbars in TkAgg and WXAgg backends
- remove transparent_markers.pdf
- fix rich rpm recommends
- fix broken compilation of cache files
- Run backend tests without xdist. They fail when they end up
  in the wrong process.

==== python-numpy ====

- Move flaky tests to test_failok
- Fix hpc for multiflavors (needs gh#openSUSE/hpc#3)

==== qemu ====
Subpackages: qemu-arm qemu-block-curl qemu-block-dmg qemu-block-gluster qemu-block-iscsi qemu-block-nfs qemu-block-rbd qemu-block-ssh qemu-chardev-baum qemu-chardev-spice qemu-guest-agent qemu-hw-display-qxl qemu-hw-display-virtio-gpu qemu-hw-display-virtio-gpu-pci qemu-hw-display-virtio-vga qemu-hw-usb-redirect qemu-hw-usb-smartcard qemu-ksm qemu-lang qemu-microvm qemu-ppc qemu-s390x qemu-seabios qemu-skiboot qemu-tools qemu-ui-curses qemu-ui-gtk qemu-ui-opengl qemu-ui-spice-app qemu-ui-spice-core qemu-vgabios qemu-vhost-user-gpu qemu-x86

- Fix qemu-testsuite issue where white space processing gets
  handled differently under bash 5.1 (boo#1181054)
  iotests-Fix-_send_qemu_cmd-with-bash-5.1.patch
- Convert qemu-kvm from a script to a symlink. Using qemu-kvm to
  invoke the QEMU emulator has been deprecated for some time,
  but is still provided. It has as it's ancient origins a version
  of QEMU which had KVM acceleration enabled by default, and then
  recently, until now, it is a shell script which execs the QEMU
  emulator, adding '-machine accel=kvm' to the beginning of the
  list of command line options passed to the emulator.
  This method collides with the now preferred method of specifying
  acceleration options by using -accel. qemu-kvm is now changed to
  simply be a symlink to the same QEMU binary which the prior
  script exec'd. This new approach takes advantage of a built-in
  QEMU feature where if QEMU is invoked using a program name ending
  in 'kvm', KVM emulation is enabled. This approach is better in
  that it is more compatible with any other command line option
  that may be added for describing acceleration.
  For those who have modified qemu-kvm to add additional command
  line options, or take other actions in the context of the script
  you will now need to create an alternate script "emulator" to
  achieve the same result. Note that it's possible there may be
  some very subtle behavioral difference in the switch from a
  script to a symlink, but given that qemu-kvm is a deprecated
  package, we're not going to worry about that.

==== raspberrypi-firmware ====
Version update (2020.12.15 -> 2021.01.15)

- Update to c78f3ef4 (2021-01-15):
  * firmware: isp: Fix handling of different YUV colour spaces
  * firmware: poe_hat: Actually close the I2C handle
  * Firmware: undo previous reverts
  * firmware: Revert firmware: HAT/I2C updates
  * firmware: firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 formats
  * firmware: audioplus: Fix hang when switching destination
    See: #1516
  * firmware: HAT/I2C updates
  * firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 format
  * firmware: dmalib: Keep 40-bit DMA clear of L2 alias
  * firmware: DSI interrupt fixes, and HDMI SM clock for deep colour

==== raspberrypi-firmware-config ====
Version update (2020.12.15 -> 2021.01.15)

- Update to c78f3ef4 (2021-01-15):
  * firmware: isp: Fix handling of different YUV colour spaces
  * firmware: poe_hat: Actually close the I2C handle
  * Firmware: undo previous reverts
  * firmware: Revert firmware: HAT/I2C updates
  * firmware: firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 formats
  * firmware: audioplus: Fix hang when switching destination
    See: #1516
  * firmware: HAT/I2C updates
  * firmware: MMAL/IL: Add support for the 16bpp Bayer/Grey raw 10/12/14 format
  * firmware: dmalib: Keep 40-bit DMA clear of L2 alias
  * firmware: DSI interrupt fixes, and HDMI SM clock for deep colour

==== readline ====
Version update (8.0 -> 8.1)
Subpackages: libreadline8 readline-doc

- Update to final readline-8.1
  which is mainly rc3
- Remove obsolate patches and the signatures
  * readline80-001
  * readline80-001.sig
  * readline80-002
  * readline80-002.sig
  * readline80-003
  * readline80-003.sig
  * readline80-004
  * readline80-004.sig
- Port patches
  * readline-5.2-conf.patch
  * readline-6.2-metamode.patch
  * readline-6.3-destdir.patch
  * readline-6.3-input.dif
  * readline-6.3-rltrace.patch
  * readline-7.0-screen.patch
- Port and rename patch readline-8.0.dif which is now readline-8.1.dif
- Update to readline-8.1-rc3 for testing
  * Fixed a bug that could cause point to be set beyond the end of the line
    buffer when aborting an incremental search.
- Update to readline-8.1-rc2 for testing
  * Bracketed paste mode is enabled by default. There is a configure-time
    option (--enable-bracketed-paste-default) to set the default to on or off.
  * Terminals that are named "dumb" or unknown do not enable bracketed paste
    by default.
  * Ensure that disabling bracketed paste turns off highlighting the incremental
    search string when the search is successful.
- Remove patch readline-8.1-bracketed_paste_off.patch and use the
  new build time configuration

==== rtl8812au ====
Version update (5.6.4.2+git20200702.3110ad6_k5.10.7_1 -> 5.9.3.2+git20201214.b95e750_k5.10.9_1)

- Update to 5.9.3.2+git20201214.b95e750
  * Works with kernel 5.10.

==== rubygem-Ascii85 ====
Version update (1.0.3 -> 1.1.0)

updated to version 1.1.0
  see installed History.txt
  === 1.1.0 / 2020-11-11
  * Make use of frozen_string_literal
  * Update tests to use newer minitest syntax

==== rubygem-autoprefixer-rails ====
Version update (10.1.0.0 -> 10.2.0.0)

- updated to version 10.2.0.0
  * Added TypeScript definitions (by Dmitry Semigradsky).
  * Fixed docs (by Florian Pellet).
  * Update Can I Use data.
  * Update postcss to 8.2.2

==== rubygem-bcrypt_pbkdf ====
Version update (1.0.1 -> 1.1.0)

updated to version 1.1.0
  see installed CHANGELOG.md

==== rubygem-benchmark ====
Version update (0.1.0 -> 0.1.1)

updated to version 0.1.1
  no changelog found

==== rubygem-binding_of_caller ====
Version update (0.8.0 -> 1.0.0)

updated to version 1.0.0
  see installed HISTORY

==== rubygem-bundler ====
Version update (2.1.4 -> 2.2.6)

updated to version 2.2.6
  see installed CHANGELOG.md

==== rubygem-capistrano ====
Version update (3.14.1 -> 3.15.0)

updated to version 3.15.0
  see installed CHANGELOG.md

==== rubygem-celluloid ====
Version update (0.17.4 -> 0.18.0)

updated to version 0.18.0
  see installed CHANGES.md

==== rubygem-concurrent-ruby ====
Version update (1.1.7 -> 1.1.8)
Subpackages: ruby2.7-rubygem-concurrent-ruby ruby3.0-rubygem-concurrent-ruby

updated to version 1.1.8
  see installed CHANGELOG.md
  [#]# Release v1.1.8 (20 January 2021)
  * (#885) Fix race condition in TVar for stale reads
  * (#884) RubyThreadLocalVar: Do not iterate over hash which might conflict with new pair addition

==== rubygem-cool.io ====
Version update (1.6.1 -> 1.7.0)

updated to version 1.7.0
  see installed CHANGES.md
  1.7.0
  - ----
  * Fix extension build failure for ruby3

==== rubygem-crack ====
Version update (0.4.4 -> 0.4.5)

updated to version 0.4.5
  no changelog found

==== rubygem-cri ====
Version update (2.15.10 -> 2.15.11)

updated to version 2.15.11
  see installed NEWS.md
  [#]# 2.15.11
  Fixes:
  - Added support for Ruby 3.0 (#111)
  Changes:
  - Dropped support for Ruby 2.3 and 2.4 (#112)
- limit to ruby 2.7 on TW

==== rubygem-debase-ruby_core_source ====
Version update (0.10.10 -> 0.10.12)

updated to version 0.10.12
  see installed CHANGELOG.md

==== rubygem-debug_inspector ====
Version update (0.0.3 -> 1.0.0)

updated to version 1.0.0
  no changelog found

==== rubygem-delayed_job ====
Version update (4.1.8 -> 4.1.9)

- updated to version 4.1.9
    Support for Rails 6.1
    Add support for parameterized mailers via delay call (#1121)

==== rubygem-delayed_job_active_record ====
Version update (4.1.4 -> 4.1.5)

- updated to version 4.1.5
  no changelog found, but allows Rails 6.1

==== rubygem-docile ====
Version update (1.3.2 -> 1.3.5)

updated to version 1.3.5
  see installed HISTORY.md

==== rubygem-dry-configurable ====
Version update (0.11.6 -> 0.12.0)

updated to version 0.12.0
  see installed CHANGELOG.md

==== rubygem-dry-core ====
Version update (0.4.9 -> 0.5.0)

updated to version 0.5.0
  see installed CHANGELOG.md

==== rubygem-dry-logic ====
Version update (1.0.7 -> 1.1.0)

updated to version 1.1.0
  see installed CHANGELOG.md
  <!--- DO NOT EDIT THIS FILE - IT'S AUTOMATICALLY GENERATED VIA DEVTOOLS --->
  [#]# 1.1.0 2020-12-26
  [#]## Changed
  - Switched to equalizer from dry-core (@solnic)
  [Compare v1.0.8...v1.1.0](https://github.com/dry-rb/dry-logic/compare/v1.0.8...v1.1.0)
  [#]# 1.0.8 2020-09-28
  [#]## Fixed
  - Better Ruby 3 support with fixed specialization for rules of negative arity (@flash-gordon)
  [Compare v1.0.7...v1.0.8](https://github.com/dry-rb/dry-logic/compare/v1.0.7...v1.0.8)

==== rubygem-excon ====
Version update (0.76.0 -> 0.78.1)

updated to version 0.78.1
  no changelog found

==== rubygem-faraday ====
Version update (1.0.1 -> 1.3.0)

updated to version 1.3.0
  see installed CHANGELOG.md
  [#]# [v1.2.0](https://github.com/lostisland/faraday/releases/tag/v1.2.0) (2020-12-23)
  [#]## Features
  * Introduces `on_request` and `on_complete` methods in `Faraday::Middleware`. (#1194, @iMacTia)
  [#]## Fixes
  * Require 'date' to avoid retry exception (#1206, @rustygeldmacher)
  * Fix rdebug recursion issue (#1205, @native-api)
  * Update call to `em_http_ssl_patch` (#1202, @kylekeesling)
  * `EmHttp` adapter: drop superfluous loaded? check (#1213, @olleolleolle)
  * Avoid 1 use of keyword hackery (#1211, @grosser)
  * Fix #1219 `Net::HTTP` still uses env proxy (#1221, @iMacTia)
  [#]## Documentation
  * Add comment in gemspec to explain exposure of `examples` and `spec` folders. (#1192, @iMacTia)
  * Adapters, how to create them (#1193, @olleolleolle)
  * Update documentation on using the logger (#1196, @tijmenb)
  * Adjust the retry documentation and spec to align with implementation (#1198, @nbeyer)
  [#]## Misc
  * Test against ruby head (#1208, @grosser)
  [#]# [v1.1.0](https://github.com/lostisland/faraday/releases/tag/v1.1.0) (2020-10-17)
  [#]## Features
  * Makes parameters sorting configurable (#1162 @wishdev)
  * Introduces `flat_encode` option for multipart adapter. (#1163 @iMacTia)
  * Include request info in exceptions raised by RaiseError Middleware (#1181 @SandroDamilano)
  [#]## Fixes
  * Avoid `last arg as keyword param` warning when building user middleware on Ruby 2.7 (#1153 @dgholz)
  * Limits net-http-persistent version to < 4.0 (#1156 @iMacTia)
  * Update `typhoeus` to new stable version (`1.4`) (#1159 @AlexWayfer)
  * Properly fix test failure with Rack 2.1+. (#1171 @voxik)
  [#]## Documentation
  * Improves documentation on how to contribute to the site by using Docker. (#1175 @iMacTia)
  * Remove retry_change_requests from documentation (#1185 @stim371)
  [#]## Misc
  * Link from GitHub Actions badge to CI workflow (#1141 @olleolleolle)
  * Return tests of `Test` adapter (#1147 @AlexWayfer)
  * Add 1.0 release to wording in CONTRIBUTING (#1155 @olleolleolle)
  * Fix linting bumping Rubocop to 0.90.0 (#1182 @iMacTia)
  * Drop `git ls-files` in gemspec (#1183 @utkarsh2102)
  * Upgrade CI to ruby/setup-ruby (#1187 @gogainda)
  [#]# [v1.0.1](https://github.com/lostisland/faraday/releases/tag/v1.0.1) (2020-03-29)
  [#]## Fixes
  * Use Net::HTTP#start(&block) to ensure closed TCP connections (#1117)
  * Fully qualify constants to be checked (#1122)
  * Allows `parse` method to be private/protected in response middleware (#1123)
  * Encode Spaces in Query Strings as '%20' Instead of '+' (#1125)
  * Limits rack to v2.0.x (#1127)
  * Adapter Registry reads also use mutex (#1136)
  [#]## Documentation
  * Retry middleware documentation fix (#1109)
  * Docs(retry): precise usage of retry-after (#1111)
  * README: Link the logo to the website (#1112)
  * Website: add search bar (#1116)
  * Fix request/response mix-up in docs text (#1132)

==== rubygem-fluentd ====
Version update (1.11.2 -> 1.12.0)

updated to version 1.12.0
  see installed CHANGELOG.md
  [#] v1.12
  [#]# Release v1.12.0 - 2020/01/05
  [#]## New feature
  * in_tail: Add `follow_inode` to support log rotation with wild card
    https://github.com/fluent/fluentd/pull/2992
  * in_tail: Handle linux capability
    https://github.com/fluent/fluentd/pull/3155
    https://github.com/fluent/fluentd/pull/3162
  * windows: Add win32 events alternative to unix signals
    https://github.com/fluent/fluentd/pull/3131
  [#]## Enhancement
  * buffer: Enable metadata comparison optimization on all platform
    https://github.com/fluent/fluentd/pull/3095
  * fluent-plugin-config-formatter: Handle `service_discovery` type
    https://github.com/fluent/fluentd/pull/3178
  * in_http: Add `add_query_params` parameter to add query params to event record
    https://github.com/fluent/fluentd/pull/3197
  * inject: Support `unixtime_micros` and `unixtime_nanos` in `time_type`
    https://github.com/fluent/fluentd/pull/3220
  * Refactoring code
    https://github.com/fluent/fluentd/pull/3167
    https://github.com/fluent/fluentd/pull/3170
    https://github.com/fluent/fluentd/pull/3180
    https://github.com/fluent/fluentd/pull/3196
    https://github.com/fluent/fluentd/pull/3213
    https://github.com/fluent/fluentd/pull/3222
  [#]## Bug fix
  * output: Prevent retry.step from being called too many times in a short time
    https://github.com/fluent/fluentd/pull/3203

==== rubygem-fog-libvirt ====
Version update (0.7.0 -> 0.8.0)

updated to version 0.8.0
  no changelog found

==== rubygem-font-awesome-rails ====
Version update (4.7.0.5 -> 4.7.0.6)

updated to version 4.7.0.6
  no changelog found

==== rubygem-gettext ====
Version update (3.3.5 -> 3.3.7)

updated to version 3.3.7
  see installed news.md
  [#]# 3.3.7: 2021-01-18 {#version-3-3-7}
  [#]## Improvements
  * msgmerge: Added `--no-report-warning` option.
    [GitHub#81][Reported by Akim Demaille]
  [#]## Thanks
  * Akim Demaille
- update to 3.3.6
  see installed news.md
  [#]## Improvements
  * erb: Added support for `-%>`.
    [GitHub#77][Reported by lremes]
  * Removed ChangeLog.
    [GitHub#76][Reported by Will Stephenson]
  * Don't assume `RbConfig::CONFIG["datadir"]` is available. For
    example, TruffleRuby doesn't provide it.
  [#]## Thanks
  * lremes
  * Will Stephenson

==== rubygem-gssapi ====
Version update (1.3.0 -> 1.3.1)

updated to version 1.3.1
  see installed Changelog.md

==== rubygem-haml ====
Version update (5.1.2 -> 5.2.1)

updated to version 5.2.1
  see installed CHANGELOG.md
  [#]# 5.2.1
  Released on November 30, 2020
  ([diff](https://github.com/haml/haml/compare/v5.2.0...v5.2.1)).
  * Add in improved "multiline" support for attributes [#1043](https://github.com/haml/haml/issues/1043)
  [#]# 5.2
  Released on September 28, 2020
  ([diff](https://github.com/haml/haml/compare/v5.1.2...v5.2.0)).
  * Fix crash in the attribute optimizer when `#inspect` is overridden in TrueClass / FalseClass [#972](https://github.com/haml/haml/issues/972)
  * Do not HTML-escape templates that are declared to be plaintext [#1014](https://github.com/haml/haml/issues/1014) (Thanks [@cesarizu](https://github.com/cesarizu))
  * Class names are no longer ordered alphabetically, and now follow a new specification as laid out in REFERENCE [#306](https://github.com/haml/haml/issues/306)

==== rubygem-hashie ====
Version update (3.6.0 -> 4.1.0)

- updated to version 4.1.0
  see installed CHANGELOG.md
  [#]# [4.1.0] - 2020-02-01
  [4.1.0]: https://github.com/hashie/hashie/compare/v4.0.0...v4.1.0
  [#]## Added
  * [#499](https://github.com/hashie/hashie/pull/499): Add `Hashie::Extensions::Mash::PermissiveRespondTo` to make specific subclasses of Mash fully respond to messages for use with `SimpleDelegator` - [@michaelherold](https://github.com/michaelherold).
  [#]## Fixed
  * [#467](https://github.com/intridea/hashie/pull/467): Fixed `DeepMerge#deep_merge` mutating nested values within the receiver - [@michaelherold](https://github.com/michaelherold).
  * [#505](https://github.com/hashie/hashie/pull/505): Ensure that `Hashie::Array`s are not deconverted within `Hashie::Mash`es to make `Mash#dig` work properly - [@michaelherold](https://github.com/michaelherold).
  * [#507](https://github.com/hashie/hashie/pull/507): Suppress `Psych.safe_load` arg warn when using Psych 3.1.0+ - [@koic](https://github.com/koic).
  * [#508](https://github.com/hashie/hashie/pull/508): Fixed `Mash.load` no longer uses Rails-only `#except` - [@bobbymcwho](https://github.com/bobbymcwho).
  * [#508](https://github.com/hashie/hashie/pull/508): Fixed `Hashie::Extensions::DeepMerge` `#deep_merge` not correctly dup'ing sub-hashes if active_support hash extensions were not present - [@bobbymcwho](https://github.com/bobbymcwho).
  * [#500](https://github.com/hashie/hashie/pull/500): Do not warn when setting Mash keys that look like underbang, bang, and query methods - [@michaelherold](https://github.com/michaelherold).
  * [#510](https://github.com/hashie/hashie/pull/510): Ensure that `Hashie::Mash#compact` is only defined on Ruby version >= 2.4.0 - [@bobbymcwho](https://github.com/bobbymcwho).
  * [#511](https://github.com/hashie/hashie/pull/511): Suppress keyword arguments warning for Ruby 2.7.0 - [@koic](https://github.com/koic).
  * [#512](https://github.com/hashie/hashie/pull/512): Suppress an integer unification warning for using Ruby 2.4.0+ - [@koic](https://github.com/koic).
  * [#513](https://github.com/hashie/hashie/pull/513): Suppress a Ruby's warning when using Ruby 2.6.0+ - [@koic](https://github.com/koic).
  [#]## Miscellaneous
  * [#981](https://github.com/hashie/hashie/pull/981): Exclude tests from the gem release to reduce installation size and improve installation speed - [@michaelherold](https://github.com/michaelherold).
  * Your contribution here.
  [#]# [4.0.0] - 2019-10-30
  [4.0.0]: https://github.com/hashie/hashie/compare/v3.6.0...v4.0.0
  [#]## Added
  * [#323](https://github.com/hashie/hashie/pull/323): Added `Hashie::Extensions::Mash::DefineAccessors` - [@marshall-lee](https://github.com/marshall-lee).
  * [#474](https://github.com/hashie/hashie/pull/474): Expose `YAML#safe_load` options in `Mash#load` - [@riouruma](https://github.com/riouruma), [@dblock](https://github.com/dblock).
  * [#478](https://github.com/hashie/hashie/pull/478): Added optional array parameter to `Hashie::Mash.disable_warnings` - [@bobbymcwho](https://github.com/bobbymcwho).
  * [#481](https://github.com/hashie/hashie/pull/481): Ruby 2.6 - Support `Hash#merge` and `#merge!` called with multiple Hashes/Mashes - [@bobbymcwho](https://github.com/bobbymcwho).
  * [#488](https://github.com/hashie/hashie/pull/488): Added ability to create an anonymous `Hashie::Mash` subclass with key conflict errors silenced using `Hashie::Mash.quiet.new` - [@bobbymcwho](https://github.com/bobbymcwho).
  [#]## Changed
  * [#481](https://github.com/hashie/hashie/pull/481): Implement non-destructive standard Hash methods - [@bobbymcwho](https://github.com/bobbymcwho).
  [#]## Fixed
  * [#459](https://github.com/hashie/hashie/pull/459): Fixed a regression in `Mash.load` that disallowed aliases - [@arekt](https://github.com/arekt) and [@michaelherold](https://github.com/michaelherold).
  * [#465](https://github.com/hashie/hashie/pull/465): Fixed `deep_update` to call any readers when a key exists - [@laertispappas](https://github.com/laertispappas).
  * [#479](https://github.com/hashie/hashie/pull/479): Fixed an issue with `Hash#except` not returning a `Mash` in Rails 6 - [@bobbymcwho](https://github.com/bobbymcwho).
  * [#489](https://github.com/hashie/hashie/pull/489): Updated the documentation to exlain the behavior of `Mash` and keyword arguments - [@Bhacaz](https://github.com/Bhacaz).
  [#]## Miscellaneous
  * [#465](https://github.com/hashie/hashie/pull/465): Clean up our RuboCop configuration and fix the outstanding line length violations. This involved some minor refactoring on `Hashie::Extensions::Coercion`, `Hashie::Extensions::Dash::IndifferentAccess`, `Hashie::Extensions::DeepLocate`, `Hashie::Extensions::Mash::SafeAssignment`, and `Hashie::Hash`, but none that were detectable via the test suite - [@michaelherold](https://github.com/michaelherold).
  * [#482](https://github.com/hashie/hashie/pull/482): Update Travis configs to make jruby builds run on trusty dist. - [@BobbyMcWho](https://github.com/BobbyMcWho).

==== rubygem-hoe ====
Version update (3.22.2 -> 3.22.3)

updated to version 3.22.3
  see installed History.rdoc
  === 3.22.3 / 2021-01-10
  * 1 bug fix:
  * Bumped ruby version to include < 4 (trunk).

==== rubygem-i18n ====
Version update (1.8.5 -> 1.8.7)
Subpackages: ruby2.7-rubygem-i18n ruby3.0-rubygem-i18n

- updated to version 1.8.7
  * Fixed a regression with fallback logic: see issues #547, #546 and #542.

==== rubygem-js-routes ====
Version update (1.4.9 -> 1.4.14)

updated to version 1.4.14
  see installed CHANGELOG.md
  [#]# v1.4.14
  * Fix compatibility with UMD modules #237 [Comment](https://github.com/railsware/js-routes/issues/237#issuecomment-752754679)
  [#]# v1.4.13
  * Improve compatibility with node environment #269.
  * Change default file location configuration to Webpacker if both Webpacker and Sprockets are loaded
  [#]# v1.4.11
  * Use app/javascript/routes.js as a default file location if app/javascript directory exists
  * Add `default` export for better experience when used as es6 module
  [#]# v1.4.10
  * Require engine only when sprockets is loaded #257.

==== rubygem-json_pure ====
Version update (2.3.1 -> 2.5.1)

updated to version 2.5.1
  see installed CHANGES.md
  [#]# 2020-12-22 (2.5.1)
  * Restore the compatibility for constants of JSON class.
  [#]# 2020-12-22 (2.5.0)
  * Ready to Ractor-safe at Ruby 3.0.
  [#]# 2020-12-17 (2.4.1)
  * Restore version.rb with 2.4.1
  [#]# 2020-12-15 (2.4.0)
  * Implement a freeze: parser option #447
  * Fix an issue with generate_pretty and empty objects in the Ruby and Java implementations #449
  * Fix JSON.load_file doc #448
  * Fix pure parser with unclosed arrays / objects #425
  * bundle the LICENSE file in the gem #444
  * Add an option to escape forward slash character #405
  * RDoc for JSON #439 #446 #442 #434 #433 #430

==== rubygem-liquid ====
Version update (4.0.3 -> 5.0.0)

updated to version 5.0.0
  see installed History.md
  [#]# 5.0.0 / 2021-01-06
  [#]## Features
  * Add new `{% render %}` tag (#1122) [Samuel Doiron]
  * Add support for `as` in `{% render %}` and `{% include %}` (#1181) [Mike Angell]
  * Add `{% liquid %}` and `{% echo %}` tags (#1086) [Justin Li]
  * Add [usage tracking](README.md#usage-tracking) [Mike Angell]
  * Add `Tag.disable_tags` for disabling tags that prepend `Tag::Disableable` at render time (#1162, #1274, #1275) [Mike Angell]
  * Support using a profiler for multiple renders (#1365, #1366) [Dylan Thacker-Smith]
  [#]## Fixes
  * Fix catastrophic backtracking in `RANGES_REGEX` regular expression (#1357) [Dylan Thacker-Smith]
  * Make sure the for tag's limit and offset are integers (#1094) [David Cornu]
  * Invokable methods for enumerable reject include (#1151) [Thierry Joyal]
  * Allow `default` filter to handle `false` as value (#1144) [Mike Angell]
  * Fix render length resource limit so it doesn't multiply nested output (#1285) [Dylan Thacker-Smith]
  * Fix duplication of text in raw tags (#1304) [Peter Zhu]
  * Fix strict parsing of find variable with a name expression (#1317) [Dylan Thacker-Smith]
  * Use monotonic time to measure durations in Liquid::Profiler (#1362) [Dylan Thacker-Smith]
  [#]## Breaking Changes
  * Require Ruby >= 2.5 (#1131, #1310) [Mike Angell, Dylan Thacker-Smith]
  * Remove support for taint checking (#1268) [Dylan Thacker-Smith]
  * Split Strainer class into StrainerFactory and StrainerTemplate (#1208) [Thierry Joyal]
  * Remove handling of a nil context in the Strainer class (#1218) [Thierry Joyal]
  * Handle `BlockBody#blank?` at parse time (#1287) [Dylan Thacker-Smith]
  * Pass the tag markup and tokenizer to `Document#unknown_tag` (#1290) [Dylan Thacker-Smith]
  * And several internal changes
  [#]## Performance Improvements
  * Reduce allocations (#1073, #1091, #1115, #1099, #1117, #1141, #1322, #1341) [Richard Monette, Florian Weingarten, Ashwin Maroli]
  * Improve resources limits performance (#1093, #1323) [Florian Weingarten, Dylan Thacker-Smith]

==== rubygem-listen ====
Version update (3.2.1 -> 3.4.1)

updated to version 3.4.1
  see installed CHANGELOG.md
- updated to version 3.3.3
  see installed CHANGELOG.md

==== rubygem-loofah ====
Version update (2.8.0 -> 2.9.0)
Subpackages: ruby2.7-rubygem-loofah ruby3.0-rubygem-loofah

- updated to version 2.9.0
  * Handle CSS functions in a CSS shorthand property (like `background`). [[#199](https://github.com/flavorjones/loofah/issues/199),
    [#200](https://github.com/flavorjones/loofah/issues/200)]

==== rubygem-mime-types-data ====
Version update (3.2020.0512 -> 3.2020.1104)

updated to version 3.2020.1104
  see installed History.md

==== rubygem-minitar ====
Version update (0.5.4 -> 0.9)

- updated to version 0.9
  see installed History.md
  [#]# 0.9 / 2019-09-04
  * jtappa added the ability to skip fsync with a new option to Minitar.unpack
    and Minitar::Input#extract_entry. Provide `:fsync => false` as the last
    parameter to enable. Merged from a modified version of PR [#37][].
- updated to version 0.8
  see installed History.md
  [#]# 0.8 / 2019-01-05
  * inkstak resolved an issue introduced in the fix for [#31][] by allowing
    spaces to be considered valid characters in strict octal handling. Octal
    conversion ignores leading spaces. Merged from a slightly modified version
    of PR [#35][].
  * dearblue contributed PR [#32][] providing an explicit call to #bytesize for
    strings that include multibyte characters. The PR has been modified to be
    compatible with older versions of Ruby and extend tests.
  * Akinori MUSHA (knu) contributed PR [#36][] that treats certain badly
    encoded regular files (with names ending in `/`) as if they were
    directories on decode.
- updated to version 0.7
  see installed History.md
  [#]# 0.7 / 2018-02-19
  * Fixed issue [#28][] with a modified version of PR [#29][] covering the
    security policy and position for Minitar. Thanks so much to ooooooo\_q for
    the report and an initial patch. Additional information was added as
    [#30][].
  * dearblue contributed PR [#33][] providing a fix for Minitar::Reader when
    the IO-like object does not have a `#pos` method.
  * Kevin McDermott contributed PR [#34][] so that an InvalidTarStream is
    raised if the tar header is not valid, preventing incorrect streaming of
    files from a non-tarfile. This is a minor breaking change, so the version
    has been bumped accordingly.
  * Kazuyoshi Kato contributed PR [#26][] providing support for the GNU tar
    long filename extension.
  * Addressed a potential DOS with negative size fields in tar headers
    ([#31][]). This has been handled in two ways: the size field in a tar
    header is interpreted as a strict octal value and the Minitar reader will
    raise an InvalidTarStream if the size ends up being negative anyway.
- Remove bsc_1021740.patch for CVE-2016-10173
  This vulneribility has been fixed by upstream with v0.6.1:
  https://github.com/halostatue/minitar/commit/30e62689b614938dc96b4f2cb8e033e72f650670
- updated to version 0.6.1
  ChangeLog removed upstream

==== rubygem-mixlib-shellout ====
Version update (3.0.9 -> 3.2.2)

updated to version 3.2.2
  no changelog found
updated to version 3.1.6
  no changelog found

==== rubygem-mocha ====
Version update (1.11.2 -> 1.12.0)

updated to version 1.12.0
  no changelog found

==== rubygem-moneta ====
Version update (1.4.0 -> 1.4.1)

updated to version 1.4.1
  see installed CHANGES
  1.4.1
  * Adapters::Mongo - deprecate :db option, document :database option (#194)
  * Adapters::Mongo - add retries to increment operation

==== rubygem-omniauth ====
Version update (1.9.1 -> 2.0.1)

updated to version 2.0.1
  no changelog found

==== rubygem-omniauth-github ====
Version update (1.4.0 -> 2.0.0)

updated to version 2.0.0
  no changelog found

==== rubygem-omniauth-google-oauth2 ====
Version update (0.8.0 -> 0.8.1)

updated to version 0.8.1
  see installed CHANGELOG.md
  [#]# 0.8.1 - 2020-12-12
  [#]## Added
  - Support reading the access token from a json request body.
  [#]## Deprecated
  - Nothing.
  [#]## Removed
  - No longer verify the iat claim for JWT.
  [#]## Fixed
  - A few minor issues with .rubocop.yml.

==== rubygem-omniauth-oauth2 ====
Version update (1.7.0 -> 1.7.1)

updated to version 1.7.1
  no changelog found

==== rubygem-paint ====
Version update (2.2.0 -> 2.2.1)

updated to version 2.2.1
  see installed CHANGELOG.md
  [#]## 2.2.1
  * Explicitly set mac's Terminal.app to 256 colors only, fixes #28

==== rubygem-parser ====
Version update (2.7.1.5 -> 3.0.0.0)

updated to version 3.0.0.0
  v3.0.0.0 (2020-12-25)
  - --------------------
  API modifications:
  * current.rb: bump default branch to parser/ruby30. (#782) (Ilya Bylich)
  * do not emit truncated parts of squiggly heredoc (#774) (Ilya Bylich)
  * Optimize `SourceBuffer` line and column handling (#755) (Marc-André Lafortune)
  Features implemented:
  * ruby30.y: reintroduce `expr in pat` (#777) (Ilya Bylich)
  * builder: emit implicit hash passed to a method call as kwargs (#769) (Ilya Bylich)
  * lexer.rl: use more specific warning for ambiguous slash. (#768) (Ilya Bylich)
  * ruby30.y: allow endless method without arglist. (#765) (Ilya Bylich)
  * ruby30.y: use `=>` for one-line pattern matching. (#760) (Ilya Bylich)
  * ruby30.y: reject setters in all endless method defs. (#758) (Ilya Bylich)
  Bugs fixed:
  * lexer.rl: don't perform lookahead after tASSOC. (#764) (Ilya Bylich)
  v2.7.2.0 (2020-10-06)
  API modifications:
  * Bump 2.7 branch to 2.7.2 (#748) (Koichi ITO)

==== rubygem-pdf-core ====
Version update (0.8.1 -> 0.9.0)

updated to version 0.9.0
  no changelog found

==== rubygem-regexp_parser ====
Version update (1.8.2 -> 2.0.3)

updated to version 2.0.3
  see installed CHANGELOG.md
  [#]# [2.0.3] - 2020-12-28 - [Janosch Müller](mailto:janosch84@gmail.com)
  [#]## Fixed
  - fixed error when scanning some unlikely and redundant but valid charset patterns
  - e.g. `/[[.a-b.]]/`, `/[[=e=]]/`,
  - fixed ancestry of some error classes related to syntax version lookup
  - `NotImplementedError`, `InvalidVersionNameError`, `UnknownSyntaxNameError`
  - they now correctly inherit from `Regexp::Syntax::SyntaxError` instead of Rubys `::SyntaxError`
  [#]# [2.0.2] - 2020-12-25 - [Janosch Müller](mailto:janosch84@gmail.com)
  [#]## Fixed
  - fixed `FrozenError` when calling `#to_s` on a frozen `Group::Passive`
  * thanks to [Daniel Gollahon](https://github.com/dgollahon)
  [#]# [2.0.1] - 2020-12-20 - [Janosch Müller](mailto:janosch84@gmail.com)
  [#]## Fixed
  - fixed error when scanning some group names
  * this affected names containing hyphens, digits or multibyte chars, e.g. `/(?<a1>a)/`
  * thanks to [Daniel Gollahon](https://github.com/dgollahon) for the report
  - fixed error when scanning hex escapes with just one hex digit
  * e.g. `/\x0A/` was scanned correctly, but the equivalent `/\xA/` was not
  * thanks to [Daniel Gollahon](https://github.com/dgollahon) for the report
  [#]# [2.0.0] - 2020-11-25 - [Janosch Müller](mailto:janosch84@gmail.com)
  [#]## Changed
  - some methods that used to return byte-based indices now return char-based indices
  * the returned values have only changed for Regexps that contain multibyte chars
  * this is only a breaking change if you used such methods directly AND relied on them pointing to bytes
  * affected methods:
  * `Regexp::Token` `#length`, `#offset`, `#te`, `#ts`
  * `Regexp::Expression::Base` `#full_length`, `#offset`, `#starts_at`, `#te`, `#ts`
  * thanks to [Akinori MUSHA](https://github.com/knu) for the report
  - removed some deprecated methods/signatures
  * these are rarely used and have been showing deprecation warnings for a long time
  * `Regexp::Expression::Subexpression.new` with 3 arguments
  * `Regexp::Expression::Root.new` without a token argument
  * `Regexp::Expression.parsed`
  [#]## Added
  - `Regexp::Expression::Base#base_length`
  * returns the character count of an expression body, ignoring any quantifier
  - pragmatic, experimental support for chained quantifiers
  * e.g.: `/^a{10}{4,6}$/` matches exactly 40, 50 or 60 `a`s
  * successive quantifiers used to be silently dropped by the parser
  * they are now wrapped with passive groups as if they were written `(?:a{10}){4,6}`
  * thanks to [calfeld](https://github.com/calfeld) for reporting this a while back
  [#]## Fixed
  - incorrect encoding output for non-ascii comments
  * this led to a crash when calling `#to_s` on parse results containing such comments
  * thanks to [Michael Glass](https://github.com/michaelglass) for the report
  - some crashes when scanning contrived patterns such as `'\?'`

==== rubygem-rice ====
Version update (2.2.0 -> 3.0.0)

updated to version 3.0.0
  no changelog found

==== rubygem-rouge ====
Version update (3.23.0 -> 3.26.0)

updated to version 3.26.0
  no changelog found

==== rubygem-rspec ====
Version update (3.9.0 -> 3.10.0)

updated to version 3.10.0
  no changelog found

==== rubygem-rspec-core ====
Version update (3.9.2 -> 3.10.1)

- updated to version 3.10.1
  [Full Changelog](http://github.com/rspec/rspec-core/compare/v3.10.0...v3.10.1)
  Bug fixes:
  * RSpec warning output was missing deprecations from Ruby, these are now included.
    (Jon Rowe, #2811)
- updated to version 3.10.0
  [Full Changelog](http://github.com/rspec/rspec-core/compare/v3.9.3...v3.10.0)
  Enhancements:
  * Memoize `RSpec::Core::Formatters::ExceptionPresenter#exception_lines` to improve performance
    with slow exception messages. (Maxime Lapointe, #2743)
  * Add configuration for an error exit code (to disambiguate errored builds from failed builds
    by exit status). (Dana Sherson, #2749)

==== rubygem-rspec-expectations ====
Version update (3.9.2 -> 3.10.1)

- updated to version 3.10.1
  [Full Changelog](http://github.com/rspec/rspec-expectations/compare/v3.10.0...v3.10.1)
  Bug Fixes:
  * Allow JRuby 9.2.x.x to generate backtraces normally rather than via our
    backfill workaround. (#1230, Jon Rowe)
- updated to version 3.10.0
  [Full Changelog](http://github.com/rspec/rspec-expectations/compare/v3.9.3...v3.10.0)
  Enhancements:
  * Allow `include` matcher to be chained with `once`, `at_least`, etc. for simple cases.
    (Marc-André Lafortune, #1168)
  * Add an explicit warning when `nil` is passed to `raise_error`. (Phil Pirozhkov, #1143)
  * Improve `include` matcher's composability. (Phil Pirozhkov, #1155)
  * Mocks expectations can now set a custom failure message.
    (Benoit Tigeot and Nicolas Zermati, #1156)
  * `aggregate_failures` now shows the backtrace line for each failure. (Fabricio Bedin, #1163)
  * Support multiple combinations of `yield_control` modifiers like `at_least`, `at_most`.
    (Jon Rowe, #1169)
  * Dynamic `have_<n>` matchers now have output consistent with other dynamic matchers.
    (Marc-André Lafortune, #1195)
  * New config option `strict_predicate_matchers` allows predicate matcher to be strict
    (i.e. match for `true` or `false`) instead of the default (match truthy vs `false` or `nil`).
    (Marc-André Lafortune, #1196)

==== rubygem-rspec-mocks ====
Version update (3.9.1 -> 3.10.1)

- updated to version 3.10.1
  [Full Changelog](http://github.com/rspec/rspec-mocks/compare/v3.10.0...v3.10.1)
  Bug Fixes:
  * Issue `ArgumentError` rather than `TypeError` when unsupported methods on
    unsupported objects are attempted to be stubbed. (@zhisme, #1357)
- updated to version 3.10.0
  [Full Changelog](http://github.com/rspec/rspec-mocks/compare/v3.9.1...v3.10.0)
  Enhancements:
  * Add the ability to set a custom error generator in `MessageExpectation`.
    This will allow rspec-expectations to inject a custom failure message.
    (Benoit Tigeot and Nicolas Zermati, #1312)
  * Return the result of the block passed to `RSpec::Mocks.with_temporary_scope`
    when block run. (@expeehaa, #1329)

==== rubygem-rspec-support ====
Version update (3.9.3 -> 3.10.1)

- updated to version 3.10.1
  [Full Changelog](http://github.com/rspec/rspec-support/compare/v3.10.0...v3.10.1)
  Bug Fixes:
  * Fix deprecation expectations to fail correctly when
    asserting on messages. (Phil Pirozhkov, #453)
- updated to version 3.10.0
  No changes. Released to support other RSpec releases.

==== rubygem-rubocop ====
Version update (1.7.0 -> 1.8.1)

updated to version 1.8.1
  no changelog found
- New upstream release 1.8.0
  [#]## New features
  * [#9324](https://github.com/rubocop-hq/rubocop/pull/9324): Add new `Lint/DeprecatedConstants` cop. ([@koic][])
  * [#9319](https://github.com/rubocop-hq/rubocop/pull/9319): Support asdf's .tool-versions file. ([@noon-ng][])
  * [#9301](https://github.com/rubocop-hq/rubocop/pull/9301): Add new `Lint/RedundantDirGlobSort` cop. ([@koic][])
  * [#9281](https://github.com/rubocop-hq/rubocop/pull/9281): Add new cop `Style/EndlessMethod`. ([@dvandersluis][])
  [#]## Bug fixes
  * [#9298](https://github.com/rubocop-hq/rubocop/issues/9298): Fix an incorrect auto-correct for `Lint/RedundantCopDisableDirective` when there is a blank line before inline comment. ([@koic][])
  * [#9233](https://github.com/rubocop-hq/rubocop/issues/9233): Fix `Style/SoleNestedConditional` copying non-relevant comments during auto-correction. ([@Darhazer][])
  * [#9312](https://github.com/rubocop-hq/rubocop/issues/9312): Fix `Layout/FirstHashElementLineBreak` to apply to multi-line hashes with only a single element. ([@muirdm][])
  * [#9316](https://github.com/rubocop-hq/rubocop/issues/9316): Fix `Style/EmptyLiteral` registering wrong offense when using a numbered block for Hash.new, i.e. `Hash.new { _1[_2] = [] }`. ([@agargiulo][])
  * [#9308](https://github.com/rubocop-hq/rubocop/issues/9308): Fix an error for `Layout/EmptyLineBetweenDefs` when using endless class method. ([@koic][])
  * [#9314](https://github.com/rubocop-hq/rubocop/issues/9314): Fix an incorrect auto-correct for `Style/RedundantReturn` when multiple return values have a parenthesized return value. ([@koic][])
  * [#9335](https://github.com/rubocop-hq/rubocop/issues/9335): Fix an incorrect auto-correct for `EnforcedStyle: require_parentheses` of `Style/MethodCallWithArgsParentheses` with `Style/NestedParenthesizedCalls`. ([@koic][])
  * [#9290](https://github.com/rubocop-hq/rubocop/issues/9290): Fix a false positive for `Layout/SpaceBeforeBrackets` when using array literal method argument. ([@koic][])
  * [#9333](https://github.com/rubocop-hq/rubocop/issues/9333): Fix an error for `Style/IfInsideElse` when using a modifier `if` nested inside an `else` after `elsif`. ([@koic][])
  * [#9303](https://github.com/rubocop-hq/rubocop/issues/9303): Fix an incorrect auto-correct for `Style/RaiseArgs` with `EnforcedStyle: compact` when using exception instantiation argument. ([@koic][])
  [#]## Changes
  * [#9300](https://github.com/rubocop-hq/rubocop/pull/9300): Make `Lint/NonDeterministicRequireOrder` not to register offense when using Ruby 3.0 or higher. ([@koic][])
  * [#9320](https://github.com/rubocop-hq/rubocop/pull/9320): Support unicode-display_width v2. ([@dduugg][])
  * [#9288](https://github.com/rubocop-hq/rubocop/pull/9288): Require Parser 3.0.0.0 or higher. ([@koic][])
  * [#9337](https://github.com/rubocop-hq/rubocop/issues/9337): Add `AllowedIdentifiers` to `Naming/VariableName`. ([@dvandersluis][])
  * [#9295](https://github.com/rubocop-hq/rubocop/pull/9295): Update `Style/SingleLineMethods` to correct to an endless method definition if they are allowed. ([@dvandersluis][])
  * [#9331](https://github.com/rubocop-hq/rubocop/pull/9331): Mark `Style/MutableConstant` as unsafe. ([@koic][])
  [@koic]: https://github.com/koic
  [@noon-ng]: https://github.com/noon-ng
  [@dvandersluis]: https://github.com/dvandersluis
  [@Darhazer]: https://github.com/Darhazer
  [@muirdm]: https://github.com/muirdm
  [@agargiulo]: https://github.com/agargiulo
  [@dduugg]: https://github.com/dduugg

==== rubygem-ruby-libvirt ====

- Fix build failures with ruby 3.0
  Add 0001-Fix-include-of-st.h-to-ruby-st.h.patch (https://gitlab.com/libvirt/libvirt-ruby/-/merge_requests/7)
- Add correct SPDX license via gem2rpm.yml
- Run spec cleaner on the spec

==== rubygem-ruby-progressbar ====
Version update (1.10.1 -> 1.11.0)

updated to version 1.11.0
  no changelog found

==== rubygem-ruby2_keywords ====
Version update (0.0.2 -> 0.0.4)

updated to version 0.0.4
  no changelog found

==== rubygem-ruby_parser ====
Version update (3.15.0 -> 3.15.1)

updated to version 3.15.1
  see installed History.rdoc
  === 3.15.1 / 2021-01-10
  * 1 bug fix:
  * Bumped ruby version to include < 4 (trunk).

==== rubygem-sdoc ====
Version update (1.1.0 -> 2.0.3)

updated to version 2.0.3
  see installed CHANGELOG.md
  2.0.3
  =====
  * Use @options.title for the index
  2.0.2
  =====
  * Remove accidental rack inclusion in gemspec
  2.0.1
  =====
  * #142 Fix arrow icons for selected panel items
  * #141 Always use only one metatag for keywords
  * #140 Use h2 instead of h1 for banner header
  2.0.0
  =====
  * #137 Replace frames based implementation with a css
  * #132 Deprecate safe_level of ERB.new in Ruby 2.6

==== rubygem-serverengine ====
Version update (2.2.1 -> 2.2.2)

updated to version 2.2.2
  see installed Changelog
  2020-11-02 version 2.2.2:
  * Fix incomplete Windows support in spawn based multi worker

==== rubygem-sexp_processor ====
Version update (4.15.1 -> 4.15.2)

updated to version 4.15.2
  see installed History.rdoc
  === 4.15.2 / 2021-01-10
  * 1 bug fix:
  * Bumped ruby version to include < 4 (trunk).

==== rubygem-simplecov ====
Version update (0.19.0 -> 0.21.2)

updated to version 0.21.2
  see installed CHANGELOG.md
  0.21.2 (2021-01-09)
  ==========
  [#]# Bugfixes
  * `maximum_coverage_drop` won't fail any more if `.last_run.json` is still in the old format. Thanks [@petertellgren](https://github.com/petertellgren)
  * `maximum_coverage_drop` won't fail if an expectation is specified for a previous unrecorded criterion, it will just pass (there's nothing, so nothing to drop)
  * fixed bug in `maximum_coverage_drop` calculation that could falsely report it had dropped for minimal differences
  0.21.1 (2021-01-04)
  ==========
  [#]# Bugfixes
  * `minimum_coverage_by_file` works again as expected (errored out before ?)
  0.21.0 (2021-01-03)
  ==========
  The "Collate++" release making it more viable for big CI setups by limiting memory consumption. Also includes some nice new additions for branch coverage settings.
  [#]# Enhancements
  * Performance of `SimpleCov.collate` improved - it should both run faster and consume much less memory esp. when run with many files (memory consumption should not increase with number of files any more)
  * Can now define the minimum_coverage_by_file, maximum_coverage_drop and refuse_coverage_drop by branch as well as line coverage. Thanks to [@jemmaissroff](https://github.com/jemmaissroff)
  * Can set primary coverage to something other than line by setting `primary_coverage :branch` in SimpleCov Configuration. Thanks to [@jemmaissroff](https://github.com/jemmaissroff)
  [#]# Misc
  * reduce gem size by splitting Changelog into `Changelog.md` and a pre 0.18 `Changelog.old.md`, the latter of which is not included in the gem
  * The interface of `ResultMeger.merge_and_store` is changed to support the `collate` performance improvements mentioned above. It's not considered an official API, hence this is not in the breaking section. For people using it to merge results from different machines, it's recommended to migrate to [collate](https://github.com/simplecov-ruby/simplecov#merging-test-runs-under-different-execution-environments).
  0.20.0 (2020-11-29)
  ==========
  The "JSON formatter" release. Starting now a JSON formatter is included by default in the release. This is mostly done for Code Climate reasons, you can find more details [in this issue](https://github.com/codeclimate/test-reporter/issues/413).
  Shipping with so much by default is sub-optimal, we know. It's the long term plan to also provide `simplecov-core` without the HTML or JSON formatters for those who don't need them/for other formatters to rely on.
  [#]# Enhancements
  * `simplecov_json_formatter` included by default ([docs](https://github.com/simplecov-ruby/simplecov#json-formatter)), this should enable the Code Climate test reporter to work again once it's updated
  * invalidate internal cache after switching `SimpleCov.root`, should help with some bugs
  0.19.1 (2020-10-25)
  ==========
  [#]# Bugfixes
  * No more warnings triggered by `enable_for_subprocesses`. Thanks to [@mame](https://github.com/mame)
  * Avoid trying to patch `Process.fork` when it isn't available. Thanks to [@MSP-Greg](https://github.com/MSP-Greg)

==== rubygem-sshkit ====
Version update (1.21.0 -> 1.21.2)

updated to version 1.21.2
  see installed CHANGELOG.md

==== rubygem-strptime ====
Version update (0.2.4 -> 0.2.5)

updated to version 0.2.5
  no changelog found

==== rubygem-tmuxinator ====
Version update (2.0.1 -> 2.0.2)

updated to version 2.0.2
  no changelog found

==== rubygem-tomlrb ====
Version update (1.3.0 -> 2.0.1)

updated to version 2.0.1
  no changelog found

==== rubygem-ttfunk ====
Version update (1.6.2.1 -> 1.7.0)

updated to version 1.7.0
  see installed CHANGELOG.md
  [#]# 1.7.0
  [#]## Changes
  * Allow gem installation on Ruby 3.0
    Pavel Lobashov
  * Allow TTC files to be read from IO object
    Tom de Grunt

==== rubygem-tzinfo-0 ====
Version update (0.3.57 -> 0.3.59)

updated to version 0.3.59
  see installed CHANGES
  == Version 0.3.59 (tzdata v2020e) - 24-Dec-2020
  * Updated to tzdata version 2020e
    (https://mm.icann.org/pipermail/tz-announce/2020-December/000063.html).
  == Version 0.3.58 (tzdata v2020d) - 8-Nov-2020
  * Updated to tzdata version 2020d
    (https://mm.icann.org/pipermail/tz-announce/2020-October/000062.html).

==== rubygem-tzinfo-1.2 ====
Version update (1.2.8 -> 1.2.9)
Subpackages: ruby2.7-rubygem-tzinfo-1.2 ruby3.0-rubygem-tzinfo-1.2

updated to version 1.2.9
  see installed CHANGES.md
  Version 1.2.9 - 16-Dec-2020
  - --------------------------
  * Fixed an incorrect InvalidTimezoneIdentifier exception raised when loading a
    zoneinfo file that includes rules specifying an additional transition to the
    final defined offset (for example, Africa/Casablanca in version 2018e of the
    Time Zone Database). #123.

==== rubygem-tzinfo-data ====
Version update (1.2020.1 -> 1.2020.6)

updated to version 1.2020.6
  no changelog found

==== rubygem-unicode-display_width ====
Version update (1.7.0 -> 2.0.0)

updated to version 2.0.0
  see installed CHANGELOG.md
  [#]# 2.0.0
  - Release 2.0.0
  - Supports Ruby 3.0
  [#]# 2.0.0.pre2
  - Update 2.0 branch to Unicode 13
  [#]# 2.0.0.pre1
  Will be published as non-pre version on rubygems.org when Ruby 3.0 is released (December 2020)
  - Introduce new class-based API, which remembers your string-width configuration. See README for details.
  - Remove auto-loading of string extension
  - You can: `require "unicode/display_width/string_ext"` to continue to use the string extension
  - The manual opt-out `require "unicode/display_width/no_string_ext"` is not needed anymore and will
    issue a warning in the future
  - Remove (already deprecated) String#display_size and String#display_width aliases
  Refactorings / Internal Changes:
  - Freeze string literals
  - The Unicode::DisplayWidth now is class, instead of a module, this enables the new config-object API

==== rubygem-webpacker ====
Version update (4.2.2 -> 5.2.1)
Subpackages: ruby2.7-rubygem-webpacker ruby3.0-rubygem-webpacker

updated to version 5.2.1
  see installed CHANGELOG.md
  [#]# [[5.2.1]](https://github.com/rails/webpacker/compare/v5.2.0...5.2.1) - 2020-08-17
  - Revert [#1311](https://github.com/rails/webpacker/pull/1311).
  [#]# [[5.2.0]](https://github.com/rails/webpacker/compare/v5.1.1...5.2.0) - 2020-08-16
  - Bump dependencies and fixes. See [diff](https://github.com/rails/webpacker/compare/v5.1.1...5-x-stable) for changes.
- updated to version 5.1.1
  see installed CHANGELOG.md
  [#]# [[5.1.1]](https://github.com/rails/webpacker/compare/v5.1.0...v5.1.1) - 2020-04-20
  - Update [TypeScript documentation](https://github.com/rails/webpacker/blob/master/docs/typescript.md) and installer to use babel-loader for typescript.[(#2541](https://github.com/rails/webpacker/pull/2541)
  [#]# [[5.1.0]](https://github.com/rails/webpacker/compare/v5.0.1...v5.1.0) - 2020-04-19
  - Remove yarn integrity check [#2518](https://github.com/rails/webpacker/pull/2518)
  - Switch from ts-loader to babel-loader [#2449](https://github.com/rails/webpacker/pull/2449)
    Please see the [TypeScript documentation](https://github.com/rails/webpacker/blob/master/docs/typescript.md) to upgrade existing projects to use typescript with 5.1
  - Resolve multi-word snakecase WEBPACKER_DEV_SERVER env values [#2528](https://github.com/rails/webpacker/pull/2528)
  [#]# [[5.0.1]](https://github.com/rails/webpacker/compare/v5.0.0...v5.0.1) - 2020-03-22
  - Upgrade deps and fix sass loader config options bug [#2508](https://github.com/rails/webpacker/pull/2508)
  [#]# [[5.0.0]](https://github.com/rails/webpacker/compare/v4.2.2...v5.0.0) - 2020-03-22
  - Bump minimum node version [#2428](https://github.com/rails/webpacker/pull/2428)
  - Bump minimum ruby/rails version [#2415](https://github.com/rails/webpacker/pull/2415)
  - Add support for multiple files per entry [#2476](https://github.com/rails/webpacker/pull/2476)
  ```js
    entry: {
    home: ['./home.js', './home.scss'],
    account: ['./account.js', './account.scss']
    }
  ```
  You can now have two entry files with same names inside packs folder, `home.scss` and `home.js`
  And, other minor fixes, please see a list of changes [here](https://github.com/rails/webpacker/compare/v4.2.2...v5.0.0)

==== rubygem-websocket ====
Version update (1.2.8 -> 1.2.9)

updated to version 1.2.9
  see installed CHANGELOG.md
  [#]# 1.2.9
  - avoid ruby -w warnings

==== rubygem-winrm ====
Version update (2.3.4 -> 2.3.5)

updated to version 2.3.5
  no changelog found

==== rubygem-winrm-elevated ====
Version update (1.2.2 -> 1.2.3)

updated to version 1.2.3
  no changelog found

==== rubygem-xml-simple ====
Version update (1.1.5 -> 1.1.8)

updated to version 1.1.8
  no changelog found

==== sbc ====
Version update (1.4 -> 1.5)
Subpackages: libsbc1

- add fix-build-on-non-x86.patch: fix build on non-x86
- update to 1.5:
  * Add support for SSE primitives.

==== shared-mime-info ====
Version update (2.0 -> 2.1)

- update to 2.1:
  * New maintainers: David Faure and Ville Skyttä
  * Adapt to xdgmime behaviour change: in case of multiple glob matches, and the magic match is unrelated to all of them, ignore the magic and pick one of the glob matches. xdgmime was actually deviating from the spec on this. (#138)
  * Improve text/vnd.trolltech.linguist magic to reduce false positives for MPEG TS files (#10)
  * audio/mpeg: add layer 2, 2.5, and 1 protected magics (#46)
  * Add many aliases for image/x-tga
  * audio/x-mod: improve magic for 669 Composer files (#144)
  * Add mime-type image/ktx2 (Khronos image texture format version 2)
  * application/oxps: differentiate from /vnd.ms-xpsdocument
  * Make image/g3fax the canonical name for image/fax-g3
  * Make text/vnd.trolltech.linguist the canonical name for text/vnd.qt.linguist
  * Make application/vnd.smaf the canonical name for application/x-smaf
  * Make application/vnd.apple.keynote the canonical name for application/x-iwork-keynote-sffkey
  * Add mime-type image/astc (Adaptive Scalable Texture Compression files)
  * Add mime-type for SageMath script files (*.sage)
  * Add mime-type for Kaitai Struct
  * Remove application/x-dc-rom
  * Add mime-type for MAME compressed hard disk image (application/x-mame-chd)
  * Add mime-types application/nintendo-3ds-executable, application/x-nintendo-3ds-rom
  * Add mime-types application/x-dreamcast-rom, application/x-gd-rom-cue, application/x-discjuggler-cd-image
  * Add mime-type application/x-compressed-iso (*.cso)
  * Remove image/avif-sequence
  * Fix application/x-sharedlib vs application/x-executable confusion for PIE executables (#11)
- drop smi-Fix-pkg-config-installation-path.patch (obsolete)

==== sord ====
Version update (0.16.6 -> 0.16.8)

- update to 0.16.8:
  * Clean up code
  * Fix potential undefined behavior
  * Fix potentially incorrect search results
  * Remove the need for a generated configuration header

==== system-users ====
Subpackages: system-group-hardware system-group-kvm system-group-libvirt system-group-wheel system-user-bin system-user-daemon system-user-ftp system-user-games system-user-lp system-user-mail system-user-man system-user-news system-user-nobody system-user-qemu system-user-tftp system-user-upsd system-user-uucp system-user-vscan system-user-wwwrun

- system-user-tss.conf: Remove group entry, not needed and did
  contain syntax errors
- remove duplicate group entry:
  - system-user-tftp.conf
  - system-user-uuidd.conf
  - system-user-uucp.conf
  - system-user-uucp.conf
  - system-user-ftp.conf
  - system-user-games.conf
  - system-user-news.conf
- Add system-user-ntp subpackage with ntp user and group and
  /var/lib/ntp as home directory

==== sysuser-tools ====

- Ignore nscd return code
- If systemd-sysusers is used to create a new user/group, invalidate
  the nscd passwd and group cache to make the new user/group
  visible immediately as workaround [bsc#1181121].
  Needs to be removed after sytemd-sysusers get's fixed, since we
  invalidate the cache even if the user/group file wasn't changed.
- An "u" in a sysusers.d file will create an user and a group.
  Create provides for both, user and group.
- Use systemd-sysusers as default to create and update the user
  account. Fixes the problem that a modified sysusers config file
  get's ignored by useradd and adduser [bsc#1180549].

==== tar ====
Version update (1.32 -> 1.33)
Subpackages: tar-rmt

- GNU tar 1.33:
  * POSIX extended format headers do not include PID by default
  * --delay-directory-restore works for archives with reversed
    member ordering
  * Fix extraction of a symbolic link hardlinked to another
    symbolic link
  * Wildcards in exclude-vcs-ignore mode don't match slash
  * Fix the --no-overwrite-dir option
  * Fix handling of chained renames in incremental backups
  * Link counting works for file names supplied with -T
  * Accept only position-sensitive (file-selection) options in file
    list files
- remove deprecated texinfo packaging macros

==== tcl ====
Version update (8.6.10 -> 8.6.11)

- tclConfig.sh: Fix path names and avoid braces in TCL_PACKAGE_PATH
- Set TCL_LIBRARY at configure time for better consistency.
- New version: 8.6.11:
  * Add tcltest::(Setup|Eval|Cleanup|)Test
  * Update to Unicode-13
  * Add 3 libtommath functions to stub table
  * Many more bug fixes
- Potentially incompatible changes:
  * (bug)[ffeb20] [binary decode base64] ignore invalid chars
  * (bug)[b8e82d] some -maxlen values break uuencode round trip
  * (bug)[085913] Tcl_DStringAppendElement # quoting precision
  * (bug)[81242a] revised documentation for Tcl_UtfAtIndex()
  * (bug)[ed2980] Tcl_UtfToUniChar reads > TCL_UTF_MAX bytes
  * (bug)[a1bd37] [clock scan] new ISO format (clock-34.(19-24))
  * (bug)[501974] [clock scan] +time zone (clock-34.(53-68))
  * (new) force -eofchar \032 when evaluating library scripts
  * (new)[48898a] improve error message consistency
  * (new) revised case of module names

==== texlive-specs-n ====
Version update (2020.176.2.004svn48145 -> 2020.177.2.004svn48145)

- Enhance latexmk configuration, that is add a systemwide
  configuration below /etc/texmf/latexmk/ as latexmk.conf (boo#1180789)
  For this add patch latexmk_conf.dif

==== tk ====
Version update (8.6.10 -> 8.6.11)

- Version 8.6.11:
  * Fix TkKeyEvent platform variations
  * ttk respect -cursor option
  * MouseWheel for ttk::scrollbar
  * fix fontconfig crash when no font installed
  * fix tearoff menu redraw artifacts
  * stop crash w/Noto Color Emoji font
  * fix crash of angled text w/o Xft
  * fix crash when active button is destroyed
  * disfavor Master/Slave terminology
  * many more bug fixes.

==== u-boot-rpiarm64 ====
Subpackages: u-boot-rpiarm64-doc

Fix USB in RPi4 and RPi400 (jsc@OPENSUSE-13 bsc#1180336)
  Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2020.10
  * Patches added:
  0030-usb-xhci-pci-Add-DM_FLAG_OS_PREPARE.patch
  0031-pci-brcmstb-Cleanup-controller-stat.patch
Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2020.10
  * Patches added:
  0029-Revert-Fix-data-abort-caused-by-mis.patch - boo#1180728

==== virt-manager ====
Subpackages: virt-install virt-manager-common

- bsc#1180069 - L3: virsh edit Error: XML document failed to
  validate against schema: Unable to validate doc.
  virtinst-smbios-unsupported-for-xenpv.patch
- bsc#1180047 - [xen][virt-manger] Libvirt or Hyperisor does not
  support UEFI for 15SP3 XENPV Guest
  virtman-show-no-firmware-for-xenpv.patch

==== vlc ====
Version update (3.0.11.1 -> 3.0.12)
Subpackages: libvlc5 libvlccore9 vlc-codec-gstreamer vlc-lang vlc-noX vlc-qt vlc-vdpau

- Update to version 3.0.12:
  + Access: Add new RIST access module compliant with simple
    profile (VSF_TR-06-1).
  + Access Output: Add new RIST access output module compliant with
    simple profile (VSF_TR-06-1).
  + Demux: Fixed adaptive's handling of resolution settings.
  + Audio output: Fix audio distortion on macOS during start of
    playback.
  + Video Output: Direct3D11: Fix some potential crashes when using
    video filters.
  + Misc:
  - Several fixes in the web interface, including privacy and
    security improvements
  - Update YouTube and Vocaroo scripts.
  + Updated translations.
- Drop vlc-CVE-2020-26664.patch: fixed upstream.
- Drop fix-missing-includes-with-qt-5.15.patch: fixed upstream.

==== vsftpd ====

- Add seccomp-fixes.patch to allow getdents64 syscall in seccomp
  sandbox, fixes bsc#1179553
  Also in the same patch, fix the architecture offset from 4 to 5,
  this change was documented in https://lore.kernel.org/patchwork/patch/554803/

==== vulkan-loader ====
Version update (1.2.162.0 -> 1.2.165)

- update to 1.2.165:
  * loader: Properly check for elevated permissions
  * loader: Remove SEEK_END usage
  * Rename LIB_SUFFIX to VULKAN_LIB_SUFFIX
  * build: Update known-good files for 1.2.165 header

==== wavpack ====
Version update (5.3.0 -> 5.4.0)

- Update to version 5.4.0
  * CVE-2020-35738: Fixed an out-of-bounds write in WavpackPackSamples (bsc#1180414)
  * fixed: disable A32 asm code when building for Apple silicon
  * fixed: issues with Adobe-style floating-point WAV files
  * added: --normalize-floats option to wvunpack for correctly
    exporting un-normalized floating-point files

==== xapps ====
Version update (2.0.5 -> 2.0.6)
Subpackages: libxapp1 typelib-1_0-XApp-1_0 xapps-common xapps-common-lang

- Update to version 2.0.6.
  * 80xapp-gtk3-module.sh: Use GTK3_MODULES instead of GTK_MODULES.

==== xdg-desktop-portal ====

- Ensure systemd rpm macros are called at install/uninstall times
  for systemd user services.
- Add BuildRequires on systemd-rpm-macros.

==== xdg-utils ====

- Move call-browser and desktop-launch symlink from
  desktop-data-openSUSE/SLE to xdg-utils (bsc#170316).

==== xen ====
Version update (4.14.1_05 -> 4.14.1_06)
Subpackages: xen-libs xen-tools-domU

- bsc#1180794 - bogus qemu binary path used when creating fv guest
  under xen
  xen.spec
- bsc#1180690 - L3-Question: xen: no needsreboot flag set
  Add Provides: installhint(reboot-needed) in xen.spec for libzypp

==== yast2-packager ====
Version update (4.3.11 -> 4.3.12)

- Proposal: fixed the logic to detect whether the partitioning has
  changed since the previous execution (found by bsc#1180537).
- 4.3.12

==== yast2-trans ====
Version update (84.87.20210109.77c13975e0 -> 84.87.20210116.f5a95d2c8b)
Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu

- Update to version 84.87.20210116.f5a95d2c8b:
  * Translated using Weblate (Dutch)
  * New POT for text domain 'vpn'.
  * New POT for text domain 'users'.
  * New POT for text domain 'update'.
  * New POT for text domain 'tune'.
  * New POT for text domain 'tftp-server'.
  * New POT for text domain 'sysconfig'.
  * New POT for text domain 'support'.
  * New POT for text domain 'sudo'.
  * New POT for text domain 'storage'.
  * New POT for text domain 'squid'.
  * New POT for text domain 'sound'.
  * New POT for text domain 'snapper'.
  * New POT for text domain 'slp-server'.
  * New POT for text domain 'slp'.
  * New POT for text domain 'services-manager'.
  * New POT for text domain 'security'.
  * New POT for text domain 'scanner'.
  * New POT for text domain 'samba-server'.
  * New POT for text domain 'samba-client'.
  * New POT for text domain 's390'.
  * New POT for text domain 'registration'.
  * New POT for text domain 'rear'.
  * New POT for text domain 'proxy'.
  * New POT for text domain 'printer'.
  * New POT for text domain 'pam'.
  * New POT for text domain 'packager'.
  * New POT for text domain 'online-update-configuration'.
  * New POT for text domain 'online-update'.
  * New POT for text domain 'oneclickinstall'.
  * New POT for text domain 'ntp-client'.
  * New POT for text domain 'nis_server'.
  * New POT for text domain 'nis'.
  * New POT for text domain 'nfs_server'.
  * New POT for text domain 'nfs'.
  * New POT for text domain 'network'.
  * New POT for text domain 'migration'.
  * New POT for text domain 'mail'.
  * New POT for text domain 'ldap-client'.
  * New POT for text domain 'ldap'.
  * New POT for text domain 'kdump'.
  * New POT for text domain 'journalctl'.
  * New POT for text domain 'journal'.
  * New POT for text domain 'isns'.
  * New POT for text domain 'iscsi-lio-server'.
  * New POT for text domain 'iscsi-client'.
  * New POT for text domain 'instserver'.
  * New POT for text domain 'installation'.
  * New POT for text domain 'http-server'.
  * New POT for text domain 'ftp-server'.
  * New POT for text domain 'firewall'.
  * New POT for text domain 'fcoe-client'.
  * New POT for text domain 'drbd'.
  * New POT for text domain 'docker'.
  * New POT for text domain 'dns-server'.
  * New POT for text domain 'dhcp-server'.
  * New POT for text domain 'crowbar'.
  * New POT for text domain 'country'.
  * New POT for text domain 'control'.
  * New POT for text domain 'configuration_management'.
  * New POT for text domain 'cluster'.
  * New POT for text domain 'cio'.
  * New POT for text domain 'caasp'.
  * New POT for text domain 'bootloader'.
  * New POT for text domain 'base'.
  * New POT for text domain 'autoinst'.
  * New POT for text domain 'authserver'.
  * New POT for text domain 'auth-client'.
  * New POT for text domain 'audit-laf'.
  * New POT for text domain 'apparmor'.
  * New POT for text domain 'alternatives'.
  * New POT for text domain 'add-on'.
  * New POT for text domain 'vpn'.
  * New POT for text domain 'users'.
  * New POT for text domain 'update'.
  * New POT for text domain 'tune'.
  * New POT for text domain 'tftp-server'.
  * New POT for text domain 'sysconfig'.
  * New POT for text domain 'support'.
  * New POT for text domain 'sudo'.
  * New POT for text domain 'storage'.
  * New POT for text domain 'squid'.
  * New POT for text domain 'sound'.
  * New POT for text domain 'snapper'.
  * New POT for text domain 'slp-server'.
  * New POT for text domain 'services-manager'.
  * New POT for text domain 'security'.
  * New POT for text domain 'scanner'.
  * New POT for text domain 'samba-server'.
  * New POT for text domain 'samba-client'.
  * New POT for text domain 's390'.
  * New POT for text domain 'registration'.
  * New POT for text domain 'rear'.
  * New POT for text domain 'proxy'.
  * New POT for text domain 'printer'.
  * New POT for text domain 'pam'.
  * New POT for text domain 'packager'.
  * New POT for text domain 'online-update-configuration'.
  * New POT for text domain 'online-update'.
  * New POT for text domain 'oneclickinstall'.
  * New POT for text domain 'ntp-client'.
  * New POT for text domain 'nis_server'.
  * New POT for text domain 'nis'.
  * New POT for text domain 'nfs_server'.
  * New POT for text domain 'nfs'.
  * New POT for text domain 'network'.
  * New POT for text domain 'migration'.
  * New POT for text domain 'mail'.
  * New POT for text domain 'ldap-client'.
  * New POT for text domain 'ldap'.
  * New POT for text domain 'kdump'.
  * New POT for text domain 'journalctl'.
  * New POT for text domain 'journal'.
  * New POT for text domain 'isns'.
  * New POT for text domain 'iscsi-lio-server'.
  * New POT for text domain 'iscsi-client'.
  * New POT for text domain 'instserver'.
  * New POT for text domain 'installation'.
  * New POT for text domain 'http-server'.
  * New POT for text domain 'ftp-server'.
  * New POT for text domain 'firewall'.
  * New POT for text domain 'fcoe-client'.
  * New POT for text domain 'drbd'.
  * New POT for text domain 'docker'.
  * New POT for text domain 'dns-server'.
  * New POT for text domain 'dhcp-server'.
  * New POT for text domain 'crowbar'.
  * New POT for text domain 'country'.
  * New POT for text domain 'control'.
  * New POT for text domain 'configuration_management'.
  * New POT for text domain 'cluster'.
  * New POT for text domain 'cio'.
  * New POT for text domain 'caasp'.
  * New POT for text domain 'bootloader'.
  * New POT for text domain 'base'.
  * New POT for text domain 'autoinst'.
  * New POT for text domain 'authserver'.
  * New POT for text domain 'auth-client'.
  * New POT for text domain 'audit-laf'.
  * New POT for text domain 'apparmor'.
  * New POT for text domain 'alternatives'.
  * New POT for text domain 'add-on'.
  * Translated using Weblate (Czech)
  * Translated using Weblate (Czech)
  * Translated using Weblate (Czech)
  * Translated using Weblate (Portuguese)
  * Added translation using Weblate (Czech)
  * New POT for text domain 'network'.
  * Translated using Weblate (Portuguese)
  * Translated using Weblate (Portuguese (Brazil))
  * Translated using Weblate (Portuguese (Brazil))

==== zxing-cpp ====

- Use %cmake_build instead of %make_jobs
- Shouldn't need -DBUILD_SHARED_LIBRARY=ON